A High-Resolution TEM/EELS Study of the Effect of Doping Elements on the Sliding Mechanisms of Sputtered WS2 Coatings

It has been shown many times that cosputtering low-friction coatings of molybdenum disulfide (MoS₂) and tungsten disulfide (WS₂) with other elements can improve the structural, mechanical, and tribological properties. To achieve the lowest friction, MoS₂ or WS₂ should be doped with element(s) improving the hardness and density of the coatings. On the other hand, such elements, or their compounds, should not be present in the outermost molecular layers at the sliding interface. This article suggests that there are important differences between how MoS₂ and WS₂ coatings respond to or react with doping elements, despite the almost identical structure and behavior of the undoped materials. Two systems have been investigated by high-resolution transmission electron microscopy (HRTEM) and scanning TEM (STEM) electron energy loss spectroscopy (EELS), W-S-C-Cr and W-S-C-Ti, and showed significant amounts of oxides, which typically formed a layer just underneath the crystalline WS₂ top layer. Further, carbon was almost completely absent in the tribofilms, despite the fact that the as-deposited coatings contained as much as 40–50 at% C. An interesting observation here is that WS₂ basal planes surround or embed Fe wear particles, suggesting a relatively strong adhesion or a Fe-S chemical bonding between iron/steel and WS₂. The result of this is that the wear particles become pacified and remain in the contact as low-friction material.     

Optimized butterfly specimen for the fracture testing of sheet materials under combined normal and shear loading

The present paper is concerned with multi-axial ductile fracture experiments on sheet metals. Different stress-states are achieved within a flat specimen by applying different combinations of normal and transverse loads to the specimen boundaries. The specimen geometry is optimized such that fracture initiates remote from the free specimen boundaries. Fracture experiments are carried out on TRIP780 steel for four different loading conditions, varying from pure shear to transverse plane strain tension. Hybrid experimental–numerical analyses are performed to determine the stress and strain fields within the specimen gage section. The results show that strain localization cannot be avoided prior to the onset of fracture. Through-thickness necking prevails under tension-dominated loading while the deformation localizes along a band crossing the entire gage section under shear-dominated loading. Both experimental and simulation results demonstrate that the proposed fracture testing method is very sensitive to imperfections in the specimen machining. The loading paths to fracture are determined in terms of stress triaxiality, Lode angle parameter and equivalent plastic strain. The experimental data indicates that the relationship between the stress triaxiality and the equivalent plastic strain at the onset of ductile fracture is not unique.     

Development of a universal modeling tool for rechargeable lithium batteries

An interesting universal modeling tool for rechargeable lithium batteries is presented in this paper. The generic model is based on an equivalent circuit technique commonly used in electrochemical impedance characterization. Therefore, the parameters used in the model can be easily parameterized from the electrochemical impedance derivations, which provide a convenient integration with experimental cell characterizations. Such integration offers the universality in this modeling approach.     

Measurement and scaling of air-surface mercury exchange from substrates in the vicinity of two Nevada gold mines

The state of Nevada has extensive mineral resources, and is the largest producer of gold in the USA as well as fourth in world gold production. Mercury (Hg) is often present in the hydrothermal systems that produce gold deposits, and can be found in elevated concentrations in gold ore. As a result, mining of gold ore in Nevada has been shown to release Hg to the atmosphere from point and non-point sources. This project focused on measurement of air-soil Hg exchange associated with undisturbed soils and bedrock outcrops in the vicinity of two large gold mines. Field and laboratory data collected were used to identify the important variables controlling Hg flux from these surfaces, and to estimate a net flux from the areas adjacent to the active mines as well as that occurring from the mined area pre-disturbance. Mean daily flux by substrate type ranged from 9 ng m^− 2 day^− 1 to 140 ng m^− 2 day^− 1. Periods of net deposition of elemental Hg were observed when air masses originating from a mine site moved over sampling locations. Based on these observations and measured soil Hg concentrations we suggest that emissions from point and non-point sources at the mines are a source of Hg to the surrounding substrates with the amount deposited not being of an environmental concern but of interest mainly with respect to the cycling of atmospheric elemental Hg. Observations indicate that while some component of the deposited Hg is sequestered in the soil, this Hg is gradually released back to the atmosphere over time. Estimated pre-disturbance emissions from the current mine footprints based on field data were 0.1 and 1.7 kg yr^− 1, compared to that estimated for the current non-point mining sources of 19 and 109 kg yr^− 1, respectively.     

The effect of external flow on the feeding currents of sessile microorganisms

Microscopic sessile suspension feeders live attached to surfaces and, by consuming bacteria-sized prey and by being consumed, they form an important part of aquatic ecosystems. Their environmental impact is mediated by their feeding rate, which depends on a self-generated feeding current. The feeding rate has been hypothesized to be limited by recirculating eddies that cause the organisms to feed from water that is depleted of food particles. However, those results considered organisms in still water, while ambient flow is often present in their natural habitats. We show, using a point-force model, that even very slow ambient flow, with speed several orders of magnitude less than that of the self-generated feeding current, is sufficient to disrupt the eddies around perpendicular suspension feeders, providing a constant supply of food-rich water. However, the feeding rate decreases in external flow at a range of non-perpendicular orientations due to the formation of recirculation structures not seen in still water. We quantify the feeding flow and observe such recirculation experimentally for the suspension feeder Vorticella convallaria in external flows typical of streams and rivers.     

Oxidative solution polymerization of aniline hydrochloride onto electrospun nanofibers mats of polylactic acid: Preparation method and characterization

In this work, we present the preparation of polylactic acid (PLLA)/polyaniline (PANI) conductive composite nanofibers mats. They are prepared by bulk oxidative solution polymerization of PANI onto electrospun non‐woven fibers mats of PLLA. The PANI ratio in the composite is about 70%w/w. Scanning electron microscopy (SEM) shows that PLLA nanofibers are randomly oriented, beads free with diameters of 186 ± 85 nm, The PLLA/PANI composite nanofibers diameter values are 518 ± 128 nm with a good adherence between PANI and PLLA nanofibers. DSC and XRD measurements reveal an amorphous structure of the electrospun PLLA fibers due to the rapid evaporization of the solvent. FTIR and UV–vis spectra reflect good mutual interactions between PANI and PLLA chains. The DC‐conductivities ( ) far better than other published ones for similar composites prepared by bulk oxidative solution polymerization of PANI onto other electrospun nanofiber mats or with electrospun nanofibers from a solution mixture of PLLA and PANI. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41618.     

交通视频监控系统中TMS320DM642与嵌入式PC/104+模块的通信

描述了TI公司媒体处理器TMS320DM642HPI的主要特点，介绍了PCI桥接器PCI2040的结构原理，提出了通过PCI2040实现TMS320DM642与PC／104＋模块进行通信的设计方案。本方案充分利用PCI总线的高数据吞吐能力和DSP的HPI接口功能，可在DSP和PC／104＋模块之间实现较高的数据传输率，实现了PC／104＋实时读／写DSP任意片内存储单元的内容。最后给出交通视频监控系统的设计方案，详细说明了通信过程的软件编程。     

Photo-oxidation in an O2 atmosphere: A powerful tool to elucidate the mechanism of UV-visible light oxidation of polymers - Application to the photodegradation of MDMO-PPV

This article describes a new approach to improve the analysis of the chemical modifications that result from the degradation of polymers under UV-visible light exposure in the presence of oxygen. The tool which is used consists of an irradiation chamber whose atmosphere is composed of ¹⁸O₂. The ¹⁸O₂ pressure inside the chamber and the hygrometry can be adjusted. In this study, particular attention was paid to the photo-oxidation of poly[2-methoxy-5-(3′,7′-dimethyloctyloxy)-1,4-phenylenevinylene] (MDMO-PPV). Using infrared spectroscopy, irradiation under the oxygen 18 atmosphere allowed discrimination between compounds formed via fixation of oxygen from the atmosphere and those formed by reorganisation of the matrix. In addition, irradiation of MDMO-PPV in an ¹⁸O₂ wet atmosphere allowed for detection of the presence of phenyl formate and aromatic ketone functions. This permitted validating the mechanism of photo-oxidation previously proposed. Additionally, with regard to blends made with MDMO-PPV and methano-fullerene[6,6]-phenyl C₆₁-butyric acid methyl ester ([60] PCBM), it was demonstrated that this technique facilitates the identification of the photo-oxidation products formed.     

Availability Analysis and Enhanced Availability Design in <Emphasis Type="Italic">p</Emphasis>-Cycle-Based Networks

p-Cycle protection is a fairly new survivability scheme that has the interesting properties of offering restoration speeds essentially the same as those offered by ring protection while requiring almost as little redundant capacity as adaptive mesh restoration [D. Stamatelakis, W.D. Grover, IEEE Transactions on Communications, vol. 48, no. 8, (August 2000), pp. 1262–1265]. This paper presents the first analytical consideration of the availability of paths in a network protected by p-cycles. Results confirm the importance that cycle sizes play in terms of availability and suggests principles or strategies for achieving high availability of paths in a network protected by p-cycles. Based on these insights, two new formulations for joint service path provisioning and capacity planning are proposed. The first one offers a way to improve the availability of selected service paths by using a different routing strategy for them than for regular service paths. The second formulation enables a new class of service paths that are offered two protection options instead of just one. That class of service paths is expected to see its availability improved in a quantum step way relative to the availability of paths having only one protection option.