全球电子废物的研究(中)

(续接本刊2007年第7期第36页)2电子废物管理方式和立法提案2.1延伸生产者责任制延伸生产者责任制(EPR)作为废物管理的新模式得以广泛推广。OECD将EPR定义为一种新的环境制度,在该制度下,生产者对其产品的责任延伸到产品销售后的整个生命周期,包括最终处置(OECD,2001)。与污染者付费原则一致,     

FDTD simulations on radar cross sections of metal cone and plasma covered metal cone

Electromagnetic wave interaction with a plasma covered metal surface has been studied using the Radar Cross Section (RCS) changes of a 10 cm diameter and 30 cm height metal cone with and without plasma coverage. A Finite-Difference-Time-Difference (FDTD) method was use to calculate the case of a cone with and without a covering of a 1 cm thick sheet plasma for both S Band (2,3, and 4 GHz) and X Band (8, 10, and 12 GHz) frequencies. The characteristic plasma frequency ω_pe was set at 10 GHz, and electron-neutral collision frequency ν_en chosen to be 20 GHz. The results indicate that the metal cone has very small RCS at head-on direction, and a large RCS looking from the back end. A Plasma covered metal cone was shown to achieve head-on direction monostatic RCS changes between −0.47 and −7.2 dBm² from 2 to 4 GHz, and −11 to −3.2 dBm² RCS changes from 8 to 12 GHz, but at the back end the RCS increases between 2.2 and 2.6 dBm² from 2 to 4 GHz, and varies between −0.9 and 0 dBm² from 8 to 12 GHz. In the two frequency bands investigated, maximum RCS reduction of −15 dBm² occurs at 8 GHz at the same direction as the incident electromagnetic wave polarization. Plasma stealth offers advantages like frequency tunability, but the challenge is establishing an adaptive feedback mechanism that can main a constant plasma density and thus a constant RCS by adjusting the power supplied to plasma generator while monitoring the changes in air speed, altitude, and humidity.     

Functional genomics studies shed light on the nutrition and gene expression of non-typhoidal Salmonella and enterovirulent E. coli in produce

Despite the fact that plants are not traditionally considered as hosts for human enteric pathogens, recent evidence suggests that non-typhoidal Salmonella and enterovirulent Escherichia coli recognize plants and rely on a specific set of genes to multiply in plant-associated environments, eventually causing dramatic outbreaks of illness. The advent of sensitive functional genomics tools, including differential fluorescence induction and in vivo expression technology, set the stage for the characterization of the genes and behaviors used by enterics to colonize, persist and proliferate within plants and the associated microbial communities. Meta-analysis of published data suggests that Salmonella and enterovirulent E. coli persist in plants using strategies that differ from those in phytobacteria. Virulence genes were upregulated in E. coli O157:H7 in the presence of lettuce leaf exudates, however Salmonella SPI-1 genes associated with gastroenteritis were dispensable during plant growth. Microarray and mutant studies of plant responses to human pathogens reveal that plants generally do not recognize Salmonella and enterovirulent E. coli as phytopathogens or beneficial symbionts, although the full spectrum of plant responses to enterics remains to be elucidated. Defining plant responses to human enteric pathogens becomes increasingly important as the feasibility of breeding for resistance to these organisms is being evaluated.     

Approximations to the Non-Central t,with Applications

A mildly conservative but very rapid calculation technique is proposed for problems requiring the use of the Non-central t distribution. Examples and a brief table are provided.     

Improving Implicit Stochastic Reservoir Optimization Models with Long-Term Mean Inflow Forecast

This technical note introduces a reservoir operation model based on implicit stochastic optimization (ISO) in which the release policy is guided by the forecast of the mean inflow for a given future horizon rather than by the prediction of the current-month inflow, such as in typical ISO models. The model also does not require the forecast of all inflows for the future horizon and shows to be more efficient in finding less vulnerable release policies when compared to several other explicit and implicit stochastic procedures.     

Not so black and white: Memory for ambiguous group members.

Exponential increases in multiracial identities, expected over the next century, create a conundrum for perceivers accustomed to classifying people as their own- or other-race. The current research examines how perceivers resolve this dilemma with regard to the own-race bias. The authors hypothesized that perceivers are not motivated to include ambiguous-race individuals in the in-group and therefore have some difficulty remembering these individuals. Both racially ambiguous and other-race faces were misremembered more often than own-race faces (Study 1), though memory for ambiguous faces was improved among perceivers motivated to include biracial individuals in the in-group (Study 2). Racial labels assigned to racially ambiguous faces determined memory for these faces, suggesting that uncertainty provides the motivational context for discounting ambiguous faces in memory (Study 3). Finally, an inclusion motivation fostered cognitive associations between racially ambiguous faces and the in-group. Moreover, the extent to which perceivers associated racially ambiguous faces with the in-group predicted memory for ambiguous faces and accounted for the impact of motivation on memory (Study 4). Thus, memory for biracial individuals seems to involve a flexible person construal process shaped by motivational factors. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Response of real-time black carbon mass instruments to mini-CAST soot

Soot is a climate forcer and a dangerous air pollutant that has been increasingly regulated. In aviation, regulatory measurements of soot mass concentration in the exhaust of aircraft turbine engines are to be based on measurements of black carbon (BC) calibrated to elemental carbon (EC) content of diffusion flame soot. The calibration soot must currently meet only one criterion: minimum EC to total carbon (TC) ratio of 0.8. However, not including soot properties other than the EC/TC ratio may potentially lead to discrepancies between different BC measurements. We studied the response of two instruments, the AVL Micro-Soot Sensor (MSS) and the Artium Laser-Induced Incandescence 300 (LII), to soot from two miniature combustion aerosol standard (mini-CAST) burners. By changing the air-fuel ratio, premixing nitrogen into the fuel, and using a catalytic stripper to remove volatile compounds, we produced a wide range of particle morphologies and EC contents. As the EC content decreased, both the instruments underreported the EC mass, but the LII diverged more severely. Upon closer investigation of eight conditions with EC/TC > 0.8, the LII underreporting was found independent of primary particle size, but increased with decreasing geometric mean diameter of the soot agglomerates. As the geometric mean diameter decreased from 160 nm to 50 nm, the differences between the LII and MSS increased from 15% to 50%. The results suggest that in addition to EC content, calibration procedures for the regulatory BC measurements may need to take particle size distributions into account.

© 2016 American Association for Aerosol Research     

Gallium gradients in Cu(In,Ga)Se2 thin‐film solar cells

The gallium gradient in Cu(In,Ga)Se₂ (CIGS) layers, which forms during the two industrially relevant deposition routes, the sequential and co‐evaporation processes, plays a key role in the device performance of CIGS thin‐film modules. In this contribution, we present a comprehensive study on the formation, nature, and consequences of gallium gradients in CIGS solar cells. The formation of gallium gradients is analyzed in real time during a rapid selenization process by in situ X‐ray measurements. In addition, the gallium grading of a CIGS layer grown with an in‐line co‐evaporation process is analyzed by means of depth profiling with mass spectrometry. This gallium gradient of a real solar cell served as input data for device simulations. Depth‐dependent occurrence of lateral inhomogeneities on the µm scale in CIGS deposited by the co‐evaporation process was investigated by highly spatially resolved luminescence measurements on etched CIGS samples, which revealed a dependence of the optical bandgap, the quasi‐Fermi level splitting, transition levels, and the vertical gallium gradient. Transmission electron microscopy analyses of CIGS cross‐sections point to a difference in gallium content in the near surface region of neighboring grains. Migration barriers for a copper‐vacancy‐mediated indium and gallium diffusion in CuInSe₂ and CuGaSe₂ were calculated using density functional theory. The migration barrier for the In_Cu antisite in CuGaSe₂ is significantly lower compared with the Ga_Cu antisite in CuInSe₂, which is in accordance with the experimentally observed Ga gradients in CIGS layers grown by co‐evaporation and selenization processes. Copyright © 2014 John Wiley & Sons, Ltd.     

‘Living’ free radical graft copolymers,II: Structure

Poly(vinyl chloride)–n-propyl xanthate (PVC–nPX) macroinitiators with 3 to 14 bonded xanthate groups per molecule were synthesized using PVC and potassium n-propyl xanthate. The reaction took place rapidly between 30 and 45°C. Ultraviolet (UV) and nuclear magnetic resonance studies confirmed the presence of xanthyl groups on these macroinitiators. The PVC–nPX macroinitiators were grafted by methyl methacrylate under UV irradiation of 254, 302 and 336 nm producing graft copolymers and homopolymers. The molecular weights increased with increasing conversion, which is consistent with a ‘living’ polymerization process. The active species in these polymerizations are believed to be macroradicals and xanthyl radicals.     

Functional Characterization of the Solute Carrier LAT-1 (SLC7A5/SLC2A3) in Human Brain Capillary Endothelial Cells with Rapid UPLC-MS/MS Quantification of Intracellular Isotopically Labelled L-Leucine

The solute carrier L-type amino acid transporter 1 (LAT-1/SLC7A5) is a viable target for drug delivery to the central nervous system (CNS) and tumors due to its high abundance at the blood–brain barrier and in tumor tissue. LAT-1 is only localized on the cell surface as a heterodimer with CD98, which is not required for transporter function. To support future CNS drug-delivery development based on LAT-1 targeting, we established an ultra-performance liquid chromatography–tandem mass spectrometry (UPLC-MS/MS) assay for stable isotopically labeled leucine ([¹³C₆, ¹⁵N]-L-leucine), with a dynamic range of 0.1–1000 ng/mL that can be applied for the functional testing of LAT-1 activity when combined with specific inhibitors and, consequently, the LAT-1 inhibition capacity of new compounds. The assay was established in a 96-well format, facilitating high-throughput experiments, and, hence, can support the screening for novel inhibitors. Applicable recommendations of the US Food and Drug Administration and European Medicines Agency for bioanalytical method validation were followed to validate the assay. The assay was applied to investigate the IC₅₀ of two well-known LAT-1 inhibitors on hCMEC/D3 cells: the highly specific LAT-1 inhibitor JPH203, which was also used to demonstrate LAT-1 specific uptake, and the general system L inhibitor BCH. In addition, the [¹³C₆, ¹⁵N]-L-leucine uptake was determined on two human brain capillary endothelial cell lines (NKIM-6 and hCMEC/D3), which were characterized for their expressional differences of LAT-1 at the protein and mRNA level and the surface amount of CD98. The IC₅₀ values of the inhibitors were in concordance with previously reported values. Furthermore, the [¹³C₆, ¹⁵N]-L-leucine uptake was significantly higher in hCMEC/D3 cells compared to NKIM-6 cells, which correlated with higher expression of LAT-1 and a higher surface amount of CD98. Therefore, the UPLC-MS/MS quantification of ([¹³C₆, ¹⁵N]-L-leucine is a feasible strategy for the functional characterization of LAT-1 activity in cells or tissue.