Conductive Recyclable Organogel Composites

As the use of automation in industry accelerates, the development of flexible, electrically conducting materials with the requisite environmental resilience for impact‐resistant sensors, foldable electronics, and electrostatic shielding are needed; simultaneously, recyclability for these materials remains a crucial attribute. Traditional conductive stretchable materials, such as rubbers, are not recyclable, and hydrogel materials have limited applications due to water evaporation and operating temperature range. Comparatively, organogels can be formulated with enhanced tunability, matrix recyclability, and the ability to support many conductive fillers. Here, rheology, mechanical testing, and electrochemical impedance spectroscopy (EIS) characterize the nanoscale interactions between carbon fillers, the liquid phase, and the network matrix in hemiaminal dynamic covalent network (HDCN) organogels. HDCN chemical equilibria are shown to strongly influence macroscopic gel properties, while HDCN composites exhibit very high conductivities up to 9.95 mS cm^?1 appropriate for sensing applications, demonstrating promise as recyclable alternatives for conductive stretchable materials.     

How important is tryptophan in human health?

Tryptophan (Trp) is an amino acid and an essential component of the human diet. It plays a crucial role in many metabolic functions. Clinicians can use Trp levels in the course of diagnosing various metabolic disorders and the symptoms associated with those diseases. Furthermore, supplementation with this amino acid is considered in the treatment of depression and sleep disorders, mainly due to the Trp relationship with the synthesis of serotonin (5-HT) and melatonin. It is also used in helping to resolve cognitive disorders, anxiety, or neurodegenerative diseases. Reduced secretion of serotonin is associated with autism spectrum disorder, obesity, anorexia and bulimia nervosa, and other diseases presenting peripherals symptoms. The literature strongly suggests that Trp has a significant role in the correct functionality of the brain-gut axis and immunology. This information leads to the consideration of Trp as an essential dietary component due to its role in the serotonin pathway. A reduced availability of Trp in diet and nutraceutical supplementation should be considered with greater concern than one might expect. This paper constitutes a review of the more salient aspects gleaned from the current knowledge base about the role of Trp in diseases, associated nutritional disorders, and food science, in general.     

Particulate matter emitted from ultrasonic humidifiers—Chemical composition and implication to indoor air

Household humidification is widely practiced to combat dry indoor air. While the benefits of household humidification are widely perceived, its implications to the indoor air have not been critically appraised. In particular, ultrasonic humidifiers are known to generate fine particulate matter (PM). In this study, we first conducted laboratory experiments to investigate the size, quantity, and chemical composition of PM generated by an ultrasonic humidifier. The mass of PM generated showed a correlation with the total alkalinity of charge water, suggesting that CaCO₃ is likely making a major contribution to PM. Ion chromatography analysis revealed a large amount of SO₄²⁻ in PM, representing a previously unrecognized indoor source. Preliminary results of organic compounds being present in humidifier PM are also presented. A whole-house experiment was further conducted at an actual residential house, with five low-cost sensors (AirBeam) monitoring PM in real time. Operation of a single ultrasonic humidifier resulted in PM_2.5 concentrations up to hundreds of μg m⁻³, and its influence extended across the entire household. The transport and loss of PM_2.5 depended on the rate of air circulation and ventilation. This study emphasizes the need to further investigate the impact of humidifier operation, both on human health and on the indoor atmospheric chemistry, for example, partitioning of acidic and basic compounds.     

Assessment of extreme and metocean conditions in the Maldives for OTEC applications

The Maldives is a group of tropical atolls, considered globally to be one of the most desirable holiday destinations. There is an urgent requirement to decrease their dependency on fossil fuels that are currently the main source of energy, and a number of renewable energy alternatives are being evaluated. Among these, due to the favorable oceanographic and bathymetric conditions, ocean thermal energy conversion (OTEC) systems represent a viable opportunity for clean and reliable power. However, the stresses the OTEC platform will need to endure during adverse environmental conditions are not well defined. The magnitude of these stresses will then have a direct influence on the design of the OTEC device. In order to overcome this uncertainty, this paper uses hindcast data sets from global weather and ocean models to assess the metocean conditions of the Maldives, with particular reference to extreme conditions. After selecting a suitable location for the deployment of the devices, return values calculated using the peaks‐over‐threshold (POT) methodology are estimated for wind, waves, and currents. The 100‐year return value for the significant wave height is found to be 4.5 m, with a joint occurrence of energy periods between 7.5 and 8.5 seconds, whereas the 100‐year return wind has a velocity of 17.8 m/s and the 100‐year return current of 1.9 m/s. The directionality of these extreme events is also considered, showing the southern and western sub‐quadrants as the prevailing sources, which provides essential information for positioning of the platform. Additional evaluations of tropical revolving storms (TRS) and variations in temperature and salinity patterns are also provided over a 1500‐m water column; temperature varies by approximately 24°C, and salinity by around 2 ppt, showing the suitability of OTEC platforms in the Maldives. This work is therefore of interest to offshore renewable energy stakeholders interested in developing a project in the Maldives or those conducting an analogous analysis in other locations.     

Smart ultrasonic sensors systems: potential of aluminum nitride thin films for the excitation of the ultrasound at high frequencies

We investigated the potential of the aluminum nitride films to excite ultrasonic waves at frequencies >50?MHz. The deposition process of the aluminum nitride thin film layers on silicon substrates was investigated and optimized regarding their piezoelectric behavior. Large single element transducers were deposited on silicon substrates with aluminum electrodes, under different parameters for the magnetron sputter process, like pressure and bias voltage. Special test setup and a measuring station were created to characterize the sensors. Acoustical measurements were carried out in pulse echo mode up to 500?MHz and the values of piezoelectric charge constant (d₃₃) were determined. As a result, two parameter sets were found for the sputtering process to obtain an excellent piezoelectric charge constant of about 7.2?pC/N maximum. Then the sputtering process with these parameters was used to deposit sensors on various substrate materials and with different electrode sizes.     

Improving Implicit Stochastic Reservoir Optimization Models with Long-Term Mean Inflow Forecast

This technical note introduces a reservoir operation model based on implicit stochastic optimization (ISO) in which the release policy is guided by the forecast of the mean inflow for a given future horizon rather than by the prediction of the current-month inflow, such as in typical ISO models. The model also does not require the forecast of all inflows for the future horizon and shows to be more efficient in finding less vulnerable release policies when compared to several other explicit and implicit stochastic procedures.     

Not so black and white: Memory for ambiguous group members.

Exponential increases in multiracial identities, expected over the next century, create a conundrum for perceivers accustomed to classifying people as their own- or other-race. The current research examines how perceivers resolve this dilemma with regard to the own-race bias. The authors hypothesized that perceivers are not motivated to include ambiguous-race individuals in the in-group and therefore have some difficulty remembering these individuals. Both racially ambiguous and other-race faces were misremembered more often than own-race faces (Study 1), though memory for ambiguous faces was improved among perceivers motivated to include biracial individuals in the in-group (Study 2). Racial labels assigned to racially ambiguous faces determined memory for these faces, suggesting that uncertainty provides the motivational context for discounting ambiguous faces in memory (Study 3). Finally, an inclusion motivation fostered cognitive associations between racially ambiguous faces and the in-group. Moreover, the extent to which perceivers associated racially ambiguous faces with the in-group predicted memory for ambiguous faces and accounted for the impact of motivation on memory (Study 4). Thus, memory for biracial individuals seems to involve a flexible person construal process shaped by motivational factors. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Feature integration across space, time, and orientation.

The perception of a visual target can be strongly influenced by flanking stimuli. In static displays, performance on the target improves when the distance to the flanking elements increases—presumably because feature pooling and integration vanishes with distance. Here, we studied feature integration with dynamic stimuli. We show that features of single elements presented within a continuous motion stream are integrated largely independent of spatial distance (and orientation). Hence, space-based models of feature integration cannot be extended to dynamic stimuli. We suggest that feature integration is guided by perceptual grouping operations that maintain the identity of perceptual objects over space and time. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Response of real-time black carbon mass instruments to mini-CAST soot

Soot is a climate forcer and a dangerous air pollutant that has been increasingly regulated. In aviation, regulatory measurements of soot mass concentration in the exhaust of aircraft turbine engines are to be based on measurements of black carbon (BC) calibrated to elemental carbon (EC) content of diffusion flame soot. The calibration soot must currently meet only one criterion: minimum EC to total carbon (TC) ratio of 0.8. However, not including soot properties other than the EC/TC ratio may potentially lead to discrepancies between different BC measurements. We studied the response of two instruments, the AVL Micro-Soot Sensor (MSS) and the Artium Laser-Induced Incandescence 300 (LII), to soot from two miniature combustion aerosol standard (mini-CAST) burners. By changing the air-fuel ratio, premixing nitrogen into the fuel, and using a catalytic stripper to remove volatile compounds, we produced a wide range of particle morphologies and EC contents. As the EC content decreased, both the instruments underreported the EC mass, but the LII diverged more severely. Upon closer investigation of eight conditions with EC/TC > 0.8, the LII underreporting was found independent of primary particle size, but increased with decreasing geometric mean diameter of the soot agglomerates. As the geometric mean diameter decreased from 160 nm to 50 nm, the differences between the LII and MSS increased from 15% to 50%. The results suggest that in addition to EC content, calibration procedures for the regulatory BC measurements may need to take particle size distributions into account.

© 2016 American Association for Aerosol Research