Deposition and surface treatment with intense pulsed ion beams

Intense pulsed ion beams (500 keV, 30 kA, 0.5 μs) are being investigated for materials processing. Demonstrated and potential applications include film deposition, glazing and joining, alloying and mixing, cleaning and polishing, corrosion improvement, polymer surface treatments, and nanophase powder synthesis. Initial experiments at Los Alamos have emphasized thin-film formation by depositing beam ablated target material on substrates. We have deposited films with complex stoichiometry such as YBa₂Cu₃O_7−x and formed diamond-like-carbon films. Instantaneous deposition rates of 1 mm/s have been achieved because of the short ion range (typically 1 μm), excellent target coupling, and the inherently high energy of these beams. Currently the beams are produced in single shot uncomplicated diodes with good electrical efficiency. High-voltage modulator technology and diodes capable of repetitive firing, needed for commercial application, are being developed.     

Human computer interaction methods for electronic flight bag envisionment and design

This paper reports on the application of a range of human computer interaction (HCI) methods to the re-design of an electronic flight bag (EFB), as part of a commercial software development project. Specifically, it focusses on the use of participatory design methods, for resolving EFB usability problems. The purpose of this case study is to: (a) Show how participatory design methods can be effectively combined with ethnographic techniques and more formal methods in HCI, for the development of human-friendly EFB systems, (b) Illuminate the specific EFB usability issues encountered in this research and related HCI solutions, (c) Generate an awareness of the challenges faced by HCI practitioners adapting HCI methods to meet commercial project constraints. The HCI methodology outlined in this case study may be of interest to practitioners tasked with process and technology envisionment and/or working with limited resources.Joan Cahill has worked as an (HCI) consultant to Aircraft Management Technologies     

Approaches to the assessment of long term exposure to radon and its progeny

In recent years, a number of case-control epidemiological studies have taken place and others are in progress to evaluate the lung cancer risk to the general population from exposure to radon and its short-lived progeny in the indoor residential environment. While it is actually long term exposure over past decades to radon progeny by inhalation that dominates lung doses, for a number of practical reasons it is radon gas that is measured in these studies. Because the risk from radon and its progeny results from cumulative exposure over past decades rather than from contemporary exposure, it is necessary to reconstruct the historical exposures of subjects. A number of factors limit the accuracy of this approach of which the following are perhaps the most important: the mobility and residential history of the subjects; radon exposures elsewhere; and changes that may have occurred in the radon levels in current and previous residences. Measurement techniques to assist in making more direct retrospective assessments of radon exposure have appeared in the recent past and are the subject of this paper. These are based on the measurement of the long-lived radon progeny 210Po trapped in household artefacts such as glass or porous and spongy materials. In vivo measurements of skeletal 210Pb in exposed persons is also a method that is currently being investigated as a means to assess historical exposures to radon. The advantages and disadvantages of these methods are described here as well as their potential in future radon epidemiological studies.     

Inbreeding effects on milk production, calving performance, fertility, and conformation in Irish Holstein-Friesians

The objective of this study was to determine the effect of inbreeding on milk production, somatic cell count, fertility, survival, calving performance, and cow conformation in Irish Holstein-Friesian pluriparous dairy cows. Inbreeding was included in a linear mixed model as either a class variable or a continuous variable, where higher order polynomials of the latter were also tested in the model as an indicator of nonlinear inbreeding depression. The effects of dam inbreeding and calf inbreeding on calving-related traits were analyzed separately. Inbreeding had a deleterious effect on most of the traits analyzed, although inbreeding depression was sometimes nonlinear or differed significantly across parities. A primiparous animal, 12.5% inbred (i.e., following the mating of noninbred half-sibs), had milk, fat, and protein yields reduced by 61.8, 5.3, and 1.2 kg, respectively; fat and protein concentrations reduced by 0.05 and 0.01%, respectively; and somatic cell scores (i.e., natural log of somatic cell count divided by 1,000) increased by 0.03. The 12.5% inbred animal was also expected to have a 2% greater incidence of dystocia, a 1% greater incidence of stillbirth, a 0.7% greater incidence of male calves, an increase in calving interval of 8.8 d, an increase in age at first calving of 2.5 d, and a reduced survival to second lactation of 4 percentage units. Inbred animals were also taller, narrower, and more angular. Although the effects of inbreeding were statistically significant, they were small and are unlikely to cause great financial loss on Irish dairy farms.     

Assessment of the antioxidant potential of natural food and plant extracts in fresh and previously frozen pork patties

Antioxidant activities of aloe vera, fenugreek, ginseng, mustard, rosemary, sage, soya protein, tea catechins and whey protein concentrate (35% protein) were evaluated in pork patties prepared from both fresh and previously frozen (-20°C) pork. Chemical analysis showed test ingredients to be more effective in reducing lipid oxidation in patties made from previously frozen pork. Tea catechins, rosemary and sage were identified as being the most effective antioxidants with potency decreasing in the following order: tea catechins>rosemary>sage. Optimum addition rates of these ingredients suggested levels of 0.25, 0.10, 0.05% for tea catechins, rosemary and sage, respectively. Soya protein (0.10%) increased meat redness in fresh pork patties producing significantly (P<0.05) higher Hunter 'a' values over the controls on days 0, 3 and 6. However, fenugreek (0.01%) was more effective in increasing Hunter 'a' values in patties manufactured from previously frozen pork. No significant (P>0.05) differences in Hunter 'L' and 'b' values were found between test and control samples on storage. The pH values of tea catechins, sage and soya protein fluctuated over time. Fresh pork patties with mustard and ginseng caused an initial decrease followed by a subsequent increase in pH values. Fenugreek caused an initial increase in pH values followed by a decrease from day 3 onwards.     

Tracking of airborne radionuclides from the damaged Fukushima Dai-ichi nuclear reactors by European networks

Radioactive emissions into the atmosphere from the damaged reactors of the Fukushima Dai-ichi nuclear power plant (NPP) started on March 12th, 2011. Among the various radionuclides released, iodine-131 ((131)I) and cesium isotopes ((137)Cs and (134)Cs) were transported across the Pacific toward the North American continent and reached Europe despite dispersion and washout along the route of the contaminated air masses. In Europe, the first signs of the releases were detected 7 days later while the first peak of activity level was observed between March 28th and March 30th. Time variations over a 20-day period and spatial variations across more than 150 sampling locations in Europe made it possible to characterize the contaminated air masses. After the Chernobyl accident, only a few measurements of the gaseous (131)I fraction were conducted compared to the number of measurements for the particulate fraction. Several studies had already pointed out the importance of the gaseous (131)I and the large underestimation of the total (131)I airborne activity level, and subsequent calculations of inhalation dose, if neglected. The measurements made across Europe following the releases from the Fukushima NPP reactors have provided a significant amount of new data on the ratio of the gaseous (131)I fraction to total (131)I, both on a spatial scale and its temporal variation. It can be pointed out that during the Fukushima event, the (134)Cs to (137)Cs ratio proved to be different from that observed after the Chernobyl accident. The data set provided in this paper is the most comprehensive survey of the main relevant airborne radionuclides from the Fukushima reactors, measured across Europe. A rough estimate of the total (131)I inventory that has passed over Europe during this period was <1% of the released amount. According to the measurements, airborne activity levels remain of no concern for public health in Europe.     

X-ray photoelectron spectroscopy (XPS) and FTIR studies of vanadium barium phosphate glasses

Barium vanadophosphate glasses, having composition 50BaO–xV₂O₅–(50 − x)P₂O₅, (x = 0–50 mol%), were prepared by conventional melt quench method. Density, molar volume and glass transition temperature (T_g) were measured as a function of V₂O₅ content. Structural investigation was done using XPS and FTIR spectroscopy. First, substitution of the P₂O₅ by the V₂O₅ in the metaphosphate 50BaO–50P₂O₅ glass increases the density and T_g and decreases the molar volume. When the amount of V₂O₅ increases, all these properties show a reverse trend. XPS measurement found in the O1s, P2p, and V2p core level spectra indicate the presence of primarily P–O–P, P–O–V and V–O–V structural bonds, the asymmetry in the P 2p spectra indeed arises from the spin-orbit splitting of P 2p core level, and more than one valence state of V ions being present. IR spectroscopy reveals the depolymerization of the phosphate glass network by systematic conversion of metaphosphate chains into pyrophosphate groups and then orthophosphate groups. Even though metaphosphate to pyrophosphate conversion is taking place due to breaking of P–O–P linkages, formation of P–O–V and P–O–Ba linkages provide cross linking between short P-structural units, which make the glass network more rigid. Above 10–20 mol% V₂O₅ content, network is highly depolymerized due to the formation of orthophosphate units and V–O–V bridge bonds, resulting in poor cross-linking, making the glass network less rigid.     

Developing 3D SEM in a broad biological context

When electron microscopy (EM) was introduced in the 1930s it gave scientists their first look into the nanoworld of cells. Over the last 80 years EM has vastly increased our understanding of the complex cellular structures that underlie the diverse functions that cells need to maintain life. One drawback that has been difficult to overcome was the inherent lack of volume information, mainly due to the limit on the thickness of sections that could be viewed in a transmission electron microscope (TEM). For many years scientists struggled to achieve three‐dimensional (3D) EM using serial section reconstructions, TEM tomography, and scanning EM (SEM) techniques such as freeze‐fracture. Although each technique yielded some special information, they required a significant amount of time and specialist expertise to obtain even a very small 3D EM dataset. Almost 20 years ago scientists began to exploit SEMs to image blocks of embedded tissues and perform serial sectioning of these tissues inside the SEM chamber. Using first focused ion beams (FIB) and subsequently robotic ultramicrotomes (serial block‐face, SBF‐SEM) microscopists were able to collect large volumes of 3D EM information at resolutions that could address many important biological questions, and do so in an efficient manner. We present here some examples of 3D EM taken from the many diverse specimens that have been imaged in our core facility. We propose that the next major step forward will be to efficiently correlate functional information obtained using light microscopy (LM) with 3D EM datasets to more completely investigate the important links between cell structures and their functions.     

简化现代雷达测试分析

正先进的的下一代雷达系统受益于数字技术和计算能力的进步。雷达基带部分越来越倾向于使用直接数字合成(direct digital synthesis,DDS)技术,从而具有强大的数字信号处理和宽基带波形生成能力,以便创建软件定义的雷达。DDS雷达优点突出。在评估是否应该将这一技术与有源电子扫描天线(active electronically scanned antenna,AESA)技术相结合时,应该考虑下述潜在的系统优点: