Hybrid solar parabolic dish power plant and high‐temperature phase change material energy storage system

In this study, a conventional steam power plant with two regenerative boilers is considered, and one of its boilers is replaced with parabolic solar dish collectors and storing the produced thermal energy by the phase change material (PCM) in a storage tank. The results show the necessity of the existence of an auxiliary fired‐gas boiler to provide constant load during the whole 24 hours. The performance of the proposed hybridized system is evaluated through energy and exergy analyses. It was demonstrated that substituting solar collectors with one of the boilers marginally lowers the energy efficiency but increases the exergy efficiency of the whole power plant up to 41.76%. Moreover, it is found out that this hybridization decreases the total irreversibility of the power plant in comparison with the base case, from 51.1 to 47.2 MW. The parametric analysis states that raising the mass flow rate of the heat transfer fluid in the solar collectors not only enhances the system performance but also increases the volume of the PCM tank.     

Thin natural gelatin/chitosan nanofibrous scaffolds for retinal pigment epithelium cells

Damage of the retinal pigmented epithelial cells causes various diseases such as age-related macular degeneration in retinal tissue. Nowadays, scientists are attempting to replace lost retinal cells with healthy and efficient cells that provide better conditions for recovering and preventing blindness. In this study, gelatin/chitosan nanofibrous scaffolds with mean diameters of 180?nm were fabricated for subretinal space through electrospinning. Thickness and morphology of the gelatin–chitosan scaffolds were analyzed by scanning electron microscopy (SEM). The results showed that the high rate of degradation, i.e., 90% damage was obtained after 1 month. The cell viability of gelatin/chitosan nanofibers were measured by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay. The SEM results of cultured RPE on gelatin/chitosan scaffolds showed the appropriate adhesion of cells on the substrate. The results of the identity of RPE cells cultured on the scaffolds indicated that a large number of cells strongly expressed RPE65 and cytokeratin 8/18.     

A translinear principle based low-power high-precision RMS-to-DC converter in CMOS technology

Analog Integrated Circuits and Signal Processing - In the present study, a low-power high-precision current-mode CMOS true root mean square (RMS)-to-DC converter is presented based on the...     

Describing a strategy to estimate the CO2-heavy oil minimum miscibility pressure based on the experimental methods

To measure MMP, slim tube method is time consuming, especially for heavy oils. In this study, a strategy is considered to measure the MMP in one of the Iranian heavy oil reservoirs. The strategy steps were done through; partial data of slim tube, coupling numerical model (CNM), full slim tube, and VIT test. The results showed that CNM technique with two experimental data obtains the MMP value faster than running a full slim tube with low error result. However, VIT determined MMP faster and its results illustrated that miscibility pressure for heavy oil occurs at zero IFT, unlike light oils.     

A multiobjective integrated multiproject scheduling and multiskilled workforce assignment model considering learning effect under uncertainty

Today, organizations try to decline academically expenses using humans and resources in addition to rising managers and operators' satisfaction. Meantime, a very important step in the process of decision is the assignment of human resources, particularly in connection with research and development (R&D) projects in which the system is highly dependent on the capabilities of human resources. In this study, we tried all the assumptions that come true in the real world, considered a model for applied R&D projects to reduce costs and increase the efficiency of projects. Therefore, an integrated multiproject scheduling and multiskill human resource assignment model under uncertainty has developed for R&D projects. Furthermore, it is assumed that the activity processing time is related to human resources assignment that means the learning effect is considered. To demonstrate the proposed model efficiency, the various dimensions instance problem was solved accurately and efficiently in GAMS software, and the results have been reported. In addition, the proposed model is validated through the input parameter sensitivity analysis. The results indicate a suitable performance of the proposed fuzzy mathematical programming model is due to the complexity of the problem.     

Photo-electrochemistry of metallic titanium/mixed phase titanium oxide

In this study, the effect of potassium hydroxide concentration in anodization bath, anodization time, and calcination temperature on the photo-electrochemical behavior of metallic titanium/mixed phase titanium oxide is investigated. Further, the phase structure of a titanium oxide photocatalyst prepared on a titanium electrode through a high-voltage anodization method is examined. The study exploits photo-electrochemical, Fourier transform infrared spectroscopy attenuated total reflectance (FTIR–ATR), X-ray diffraction, and Raman spectroscopic methods to obtain better insights into the mechanism of mixed-phase titanium oxide formation. In this regard, the photo-electrochemical properties of the photocatalysts prepared in single excitation energy, violet light (410 nm), were investigated. The anodization time and the potassium hydroxide concentration in the anodization bath have significant effects on the photo-electrochemical properties of the photocatalysts. The experiments show that the effect of potassium hydroxide concentration is a function of the anodization potential applied, demonstrating different patterns as the anodization potential changes. Furthermore, FTIR-ATR, X-ray diffraction, and Raman spectroscopic studies reveal that the extended anodization times decrease the population of OH-containing groups, leading to lower photo-electrochemical performance. On the other hand, the formation of anatase phases becomes more favorable only in the extended anodization times before application of the calcination process. Additionally, the calcination temperature has a significant impact on the anatase to rutile ratio. Finally, increasing potassium hydroxide concentration leads to the formation of an amorphous titanium oxide layer. It can be concluded that the obtained information might have a significant impact on the preparation of titanium oxide and other metal oxide photocatalysts through the high voltage anodization process.     

Sign Language to Sentence Formation: A Real Time Solution for Deaf People

Communication is a basic need of every human being to exchange thoughts and interact with the society. Acute peoples usually confab through different spoken languages, whereas deaf people cannot do so. Therefore, the Sign Language (SL) is the communication medium of such people for their conversation and interaction with the society. The SL is expressed in terms of specific gesture for every word and a gesture is consisted in a sequence of performed signs. The acute people normally observe these signs to understand the difference between single and multiple gestures for singular and plural words respectively. The signs for singular words such as I, eat, drink, home are unalike the plural words as school, cars, players. A special training is required to gain the sufficient knowledge and practice so that people can differentiate and understand every gesture/sign appropriately. Innumerable researches have been performed to articulate the computer-based solution to understand the single gesture with the help of a single hand enumeration. The complete understanding of such communications are possible only with the help of this differentiation of gestures in computer-based solution of SL to cope with the real world environment. Hence, there is still a demand for specific environment to automate such a communication solution to interact with such type of special people. This research focuses on facilitating the deaf community by capturing the gestures in video format and then mapping and differentiating as single or multiple gestures used in words. Finally, these are converted into the respective words/sentences within a reasonable time. This provide a real time solution for the deaf people to communicate and interact with the society.     

Spark plasma sintering of Al-doped ZrB2–SiC composite

This research presents the influence of Al addition on microstructure and mechanical behavior of ZrB₂–SiC ultra-high temperature ceramic matrix composite (UHTCMC) fabricated by spark plasma sintering (SPS). A 2.5?wt% Al-doped ZrB₂–20?vol% SiC UHTCMC was produced by SPS method at 1900?°C under a pressure of 40?MPa for 7?min. The microstructural and phase analysis of the composite showed that aluminum-containing compounds were formed in-situ during the SPS as a result of chemical reactions between Al and surface oxide films of the raw materials (i.e. ZrO₂ and SiO₂ on the surfaces of ZrB₂ and SiC particles, respectively). The Al dopant was completely consumed and converted to the intermetallic Al₃Zr and Al₄Si compounds as well as Al₂O₃ and Al₂SiO₅. A relative density of 99.8%, a hardness (HV5) of 21.5?GPa and a fracture toughness (indentation method) of 6.3?MPa?m^1/2 were estimated for the Al-doped ZrB₂–SiC composite. Crack bridging, branching, and deflection were identified as the main toughening mechanisms.     

Cyclic scheduling of a robotic flexible cell with load lock and swap

In this paper, we study the problem of robotic cell scheduling with m machines with flexibility, load lock and swap assumptions. The robotic cell repetitively produces parts of identical types. We determine the cycle time of all 1-unit cycles in this type of robotic cell and present two new lower bounds for robot move cycles with load lock and swap, either there is flexibility or inflexibility. We also provide a new robot move cycle and prove that it dominates all classical robot move cycles considered in the existing literature of m-machine robotic cells.