Methacrylate-functionalized POSS as an efficient adhesion promoter in olefin-based adhesives

This study aims to investigate the effects of methacrylate-functionalized polyhedral oligomeric silsesquioxane (MA-POSS) on polyolefin-based adhesives. The so called adhesive was synthesized by the cooligomerization of 1-decene/9-decene-1-ol monomers using a Ti amine bis-phenolate catalyst, [Ti{2,2′-(OC₆H₂-4,6-^tBu₂)₂NHC₂H₄NH(OⁱPr)₂], which was subsequentlyacrylated via a simple reaction with methacryloyl chloride. Different weight fractions of MA-POSS nanoparticles were solution blended with synthesized adhesive and undergone curing reaction with blue light. Observation of a unique tan δ peak in dynamic mechanical thermal analysis (DMTA) curve was clear evidence that two employed moieties were miscible and only one hybrid polymeric phase was created. Most noticeably, significant increase in mechanical parameters was detected in the lower inclusion compositions, 0.2-1 wt% of MA-POSS, where flexural strength and flexural modulus were increased up to 99 and 110%, respectively. Furthermore, thermal stability of the synthesized nanocomposite enhanced dramatically by increasing MA-POSS weight fraction. Influence of employed nanoparticles on adhesion properties of synthesized nanocomposites was evaluated with tensile shear bond strength and pull off analysis. According to the adhesion results, the MA-POSS causes an adhesion promotion on the fabricated adhesive/POSS nanocomposites.     

Novel Fault Management Framework Using Markov Chain in Wireless Sensor Networks: FMMC

Wireless Personal Communications - Due to using wireless sensor nodes (WSNs) in inaccessible areas and applying limitations in making nodes to reduce costs, these networks are prone to faults. The...     

Development of a Robust Carrier Synchronizer for High Dynamic and Low Signal to Noise Ratio Signals in GPS Receivers

Wireless Personal Communications - In this paper, a robust carrier recovery loop for high dynamic and weak signals in GPS receivers is proposed. To achieve optimal tracking performance at...     

Rotational and axial flow of pseudoplastic fluids

Mechanics of Time-Dependent Materials - Effects of a controllable axial flow on the stability of rotational flow of pseudoplastic fluids in the gap between concentric cylinders are studied. It is...     

Investigation of effective dimensionless numbers on initiation of instability in combustion of moisty organic dust简

In this work, the effect of various effective dimensionless numbers and moisture contents on initiation of instability in combustion of moisty organic dust is calculated. To have reliable model, effect of thermal radiation is taken into account. One- dimensional flame structure is divided into three zones： preheat zone, reaction zone and post-flame zone. To investigate pulsating characteristics of flame, governing equations are rewritten in dimensionless space-time （（, r/, ~） coordinates. By solving these newly achieved governing equations and combining them, which is completely discussed in body of article, a new expression is obtained. By solving this equation, it is possible to predict initiation of instability in organic dust flame. According to the obtained results by increasing Lewis number, threshold of instability happens sooner. On the other hand, pulsating is postponed by increasing Damk6hler number, pyrolysis temperature or moisture content. Also, by considering thermal radiation effect, burning velocity predicted by our model is closer to experimental results.     

Water uptake and mechanical characteristics of natural filler–polypropylene composites

Water uptake characteristics and some mechanical properties of polypropylene composites containing three types of natural fillers, purified α‐cellulose, wastepaper fibers, and wood flour were studied. The fiber contents were 15, 25, and 35% by weight. Two percent maleic anhydride polypropylene (MAPP) was also added to the mix, as the compatibilizer agent. Mixing process was performed in a Brabender Plasticorder until a constant torque was reached. Composites made out of these combinations were then pressed in a laboratory press and ASTM standard test specimens were cut out of the sheets. Water absorption and tensile tests were performed on these specimens. The results showed a significant difference between the various filler types regarding water uptake. Water uptake also increased by the increase in filler content. Tensile strength and elongation at break in composites declined when compared with pure polypropylene, but their modulus of elasticity increased. Among the three types of fillers, no significant discrepancies were observed in terms of improving mechanical properties in composites. Filler content increase had no drastic effect regarding strength improvement. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 941–946, 2003     

Photocatalytic degradation of diclofenac using hybrid MIL-53(Al)@TiO2 and MIL-53(Al)@ZnO catalysts

In this work, TiO₂ and ZnO were incorporated successfully into a MIL-53(Al) metal–organic framework (MOF) to form nanocomposites via a facile post-modification technique. The hybrid MIL-53(Al)@TiO₂ and MIL-53(Al)@ZnO were characterized by several characterization tests. The X-ray diffraction (XRD), Fourier-transform infrared (FTIR), and field-emission scanning electron microscopy (FE-SEM) analyses showed evidence of the successful incorporation of TiO₂ and ZnO within the MIL-53(Al) framework. The thermal gravimetric analysis (TGA) analysis demonstrated the excellent thermal stability of MIL-53(Al)@TiO₂ and MIL-53(Al)@ZnO, while diffuse reflectance spectroscopy (DRS) determined the direct optical band gaps of MIL-53(Al)@ZnO and MIL-53(Al)@TiO₂ to be 3.24 and 3.34 eV, respectively. The composites were also tested for the photocatalytic degradation of diclofenac (DCF) as a micropollutant. The DCF degradation efficiency of the photocatalysts was ranked in the following order: MIL-53(Al)@TiO₂ > MIL-53(Al) > TiO₂ > ZnO > MIL-53(Al)@ZnO. The incorporation of TiO₂ enhanced the optical properties of MIL-53 (Al), which was confirmed with the superior photodegradation efficiency of MIL-53(Al)@TiO₂ (>85% in 2 h) as compared to the pristine MIL-53(Al) (around 80% in 2 h). The improvement in the photodegradation of the hybrid-MOF is mostly associated with the possible dual function of the adsorption and photodegradation mechanisms. The reusability of MIL-53(Al) and its composites was inspected over 3 cycles of photodegradation experiments with DCF. The photocatalytic activity of MIL-53(Al)@TiO₂ remained unchanged (>90%), while for MIL-53(Al) and MIL-53(Al)@ZnO a slight drop was observed over three cyclic degradation experiments. Fluorescence measurements revealed that the hydroxyl radical is an important reactive oxygen species produced by all the photocatalysts that aid in the photodegradation of DCF. Furthermore, the kinetic modelling of the photoreaction identified a second-order kinetics for all catalysts. Experiments with scavengers showed that hydroxyl radicals played a major role in the photocatalytic process, and it was found that only 2 h of treatment was sufficient to obtain a considerable chemical oxygen demand (COD) reduction of 58%.