Protein Kinases and Parkinson’s Disease

Currently, the lack of new drug candidates for the treatment of major neurological disorders such as Parkinson’s disease has intensified the search for drugs that can be repurposed or repositioned for such treatment. Typically, the search focuses on drugs that have been approved and are used clinically for other indications. Kinase inhibitors represent a family of popular molecules for the treatment and prevention of various cancers, and have emerged as strong candidates for such repurposing because numerous serine/threonine and tyrosine kinases have been implicated in the pathobiology of Parkinson’s disease. This review focuses on various kinase-dependent pathways associated with the expression of Parkinson’s disease pathology, and evaluates how inhibitors of these pathways might play a major role as effective therapeutic molecules.     

Drainage potential of degraded railway ballast considering initial gradation and intrusion of external fine materials

The aggregate in the ballast layer of the railway track structure degrades due to the splitting of single particles and the abrasion of the angular corners, resulting in a ballast course comprised of degraded aggregate with a lower drainage potential. In the present study, the hydraulic conductivity of clean, degraded and clay-fouled degraded ballast specimens was evaluated considering the initial particle size distribution of aggregate and the degradation mechanism to investigate the permeability of ballast fouled by both internal and external factors. First, degraded ballast aggregate was generated by using a large-scale impact loading testing apparatus. Then, a large-scale constant head permeability test was performed to estimate the hydraulic conductivity of degraded ballast aggregate contaminated with clay. Based on the obtained results, the flow regime through extremely degraded ballast remained between a completely turbulent regime (observed in the case of clean ballast) and a laminar flow regime. Darcy’s law was shown to be valid for degraded aggregate samples contaminated with clay. While the degradation of the aggregate had the expected effect of reducing hydraulic conductivity, the abrasion of asperities was shown to have an even greater impact on hydraulic conductivity. Also, the further degradation of aggregate under impact loading was shown to accelerate the reduction in the permeability of clay-fouled degraded ballast to an unacceptable extent.     

Use of a selective extractant-impregnated resin for removal of Pb(II) ion from waters and wastewaters: Kinetics,equilibrium and thermodynamic study

Adsorption of Pb(II) ion by a novel extractant-impregnated resin, EIR, was studied as a function of various experimental parameters using batch adsorption experiments. The new EIR was prepared by impregnating gallocyanine (GCN) onto Amberlite XAD-16 resin beads. The EIR was characterized by nitrogen analysis and SEM micrographs. The new EIR showed excellent selectivity factor values (α) for Pb(II) adsorption respect to other metal ions. The effects of some chemical and physical variables were evaluated and the optimum conditions were found for Pb(II) removal from aqueous solutions. The equilibrium adsorption isotherm was fitted with the Langmuir adsorption model. The maximum adsorption capacity (q_max) of EIR for Pb(II) ions was found to be 367.92 mg g⁻¹. The kinetic studies showed that the intra-particle diffusion is the rate-controlling step. Also, the intra-particle diffusion coefficients, D_ip values, were of the order of 10⁻¹² m² s⁻¹. The values of enthalpy (ΔH°) were positive, which confirms the endothermic nature of adsorption process. Also, the positive entropy changes (ΔS°) were showed that the randomness increased along with the adsorption process. In addition, the obtained negative values of Gibbs free energy (ΔG°) indicated feasible and spontaneous nature of the adsorption process at different temperatures. The new adsorbent was very stable so that it can be successfully used for many consecutive cycles without significant loss in its adsorption capacity.     

Highly efficient supported AlCl3-based cationic catalysts to produce polyα-olefin oil base stocks

The main aim of this research is to decrease the amount of AlCl₃ content that is very corrosive and hazardous in the catalytic system, required for the α-olefin oligomerization without substantial change of final oil features. This was successfully achieved by supporting AlCl₃ on different carriers. More precisely, a series of supported bimetallic catalysts was synthesized by immobilization of AlCl₃ and TiCl₄ onto Al₂O₃, SiO₂, and mixed supports, that is, Al₂O₃/FeCl₃ and SiO₂/FeCl₃. It was found that silica and alumina-based catalysts had higher catalytic activities compared to support free AlCl₃; however, this enhancement for silica-based supports was more significant. According to gel permeation chromatography (GPC) results, the use of single supports, that is, Al₂O₃ and SiO₂, increased oligomer's molecular weight, while the application of mixed supports resulted in the decrease of molecular weight of the oligomers. Viscosity characteristics of the synthesized oligomers have also been studied at two different temperatures of 40 and 100°C (KV⁴⁰ and KV¹⁰⁰). The viscosity index (VI) values, derived from KV⁴⁰ and KV¹⁰⁰, of the prepared oligomers were in the range of 126–145. The molecular weight and termination mechanisms of the oligomers were studied by ¹H-NMR spectroscopy. The obtained results disclosed that the employed reaction conditions led to the production of oligomer chains with various structures including vinylidene (Vd), and di and three-substituted vinylene (2Vn, 3Vn) structures.     

Mechanical and high velocity impact performance of a hybrid long carbon/glass fiber/polypropylene thermoplastic composite

This research explores mechanical and high velocity impact response of hybrid long carbon/glass fiber-reinforced polypropylene thermoplastic composites (HLFT) with different fiber lengths. The work examines three hybrid long fiber thermoplastic composites, i.e., 5, 10 and 20 mm. The HLFTs were prepared by a combination of extrusion and pultrusion processes and using a cross-head die. Tensile and Izod impact tests were carried out to evaluate the mechanical performance of each HLFT compound. A gas gun with a spherical projectile was used to conduct high velocity impact tests at three velocities of 144, 205 and 240 m/s. The results showed that internal mixing operation caused extensive reduction in fiber length of all three LFT lengths. Tensile strength, modulus and Izod impact test results were the indications of higher values with increase in HLFT length. Comparison of these results for the HLFT with that of corresponding glass/PP LFTs, adopted from earlier work by Shayan Asenjan et al. (J Compos Mater 53:353–360, 2019), showed better performance of HLFT. The high velocity impact results showed a steady higher impact performance with the increase in HFLT fiber length for all impact velocities tested. Comparison of HLFT high velocity impact performance revealed better results for all impact velocities tested with that of the corresponding glass/PP LFT composite.     

Magnetic Mixed Hemimicelles Solid-Phase Extraction of Three Food Colorants from Real Samples

Introducing a specific clean extraction procedure with a minimal matrices effect for food colorant determination is still a challengeable topic and highly recommended. Mixed hemimicelle solid-phase extraction method, based on cetyltrimethylammonium bromide-coated Fe₃O₄/SiO₂ nanoparticles as a novel, simple, and fast preconcentration method, was applied for preconcentration and fast isolation of three synthetic food colorants in foodstuff matrices prior to HPLC-UV-vis determination. The influence of different parameters on extraction efficiency such as surfactant amount, sample pH, time of extraction, desorption condition, and nanoparticles concentration was optimized. Under the optimized conditions, a preconcentration factor of 100 was achieved by extracting 10 mL sample. The limit of detection for the three synthetic food colorants including Tartrazine, Sunset yellow FCF, and Quinoline yellow is 2.50, 1.25, and 2.12 μg/L, respectively. The proposed method was applicable for extraction and preconcentration of three food colorants in various food samples with the food dye contents in the range of 13–105 μg/L.     

Novel conductive magnetic nanocomposite based on poly (indole-co-thiophene) as a hemoglobin diagnostic biosensor: Synthesis,characterization and physical properties

The novel conductive nanocomposite has been successfully prepared by emulsion polymerization. First, magnetite nanoparticles were synthesized via coprecipitation reaction. Then, poly (indole-co-thiophene)@Fe₃O₄ nanocomposite was prepared via emulsion copolymerization of indole and thiophene monomers using sodium dodecyl sulfate as an emulsifier and ammonium persulfate as an oxidant in the presence of Fe₃O₄ nanoparticles. Characterization of the synthesized copolymer, Poly (In-co-T), and its magnetic nanocomposite were studied by Fourier transform infrared spectra, X-ray diffraction, scanning electron microscopy, thermal gravimetric analysis, differential scanning calorimetric, UV-vis spectrophotometer, and vibrating sample magnetometer. Also, the electrical conductivity of copolymer and nanocomposite were determined by four-probe instrument. Results showed a synergic effect in thermal stability by good interaction between polymer chain and magnetic nanoparticles. The conductivity of the nanocomposite was higher than bare copolymer, and increase of nanoparticles content caused an increment in the conductivity of the nanocomposites. The applicable properties of proposed conductive nanocomposite as a base at electrochemical biosensing have been investigated.     

Effect of green manure and supplemental fertility amendments on selected soil quality parameters in an organic potato rotation in Eastern Canada

The effects of green manure, crop sequence and off-farm composts on selected soil quality parameters were assessed in a three-year organic potato (Solanum tuberosum L.) rotation in Eastern Canada. Three crop sequences varying in preceding green manure [red clover (RCl) + RCl, and beans/buckwheat or carrots + oats/peas/vetch mixture (OPV)] as main plots and four fertility treatments applied in the potato phase only [control; inorganic fertilizer; municipal solid waste compost (MSW); composted paper mill biosolid (PMB)] as subplots were compared. In 2008 and 2010, changes in selected soil quality parameters (0–15 cm) were assessed prior to planting of potatoes and at potato tuber initiation stage. Potentially mineralizable nitrogen (N) and the acid phosphatase enzyme activity average values across years were greater following RCl (1.51 abs and 622 kg ha^?1) compared with OPV (1.32 abs and 414 kg ha^?1) at potato planting. Soil NO₃–N average value was greater following RCl compared with OPV (63 vs. 52 kg ha^?1) at tuber initiation. For the other measured parameters, OPV and RCl were similar. The soil organic carbon (C) and particulate organic matter-C were greater under PMB and MSW (31.1 and 7.57 kg ha^?1) compared with fertilizer treatment (27.9 and 6.05 kg ha^?1). The microbial biomass C and microbial biomass quotient were greater under MSW (216 kg ha^?1 and 0.73 %) than PMB and fertilizer (147 kg ha^?1 and 0.50 %) across crop rotations. Annual legume green manures and off-farm composts can be used to satisfy potato N requirement and maintains soil quality in organic potato rotations.     

The effects of processing parameters on formation of nano-spinel (MgAl2O4) from LiCl moltensalt

Nano-MgAl₂O₄ particles were successfully synthesized at 850 °C using the molten-salt method, and the effects of processing parameters, such as temperature, holding time and amount of salt on the crystallization of MgAl₂O₄ were investigated. Nano-alumina, magnesia and lithium chloride were used as starting materials. LiCl molten salt provided a liquid medium for reaction of Al₂O₃ and MgO to form MgAl₂O₄. The results demonstrated that MgAl₂O₄ started to form at about 650 °C and that, after the temperature was increased to 1000 °C, the amounts of MgAl₂O₄ in the resultant powders increased with a concomitant decrease in Al₂O₃ and MgO contents. After washing with hot-distilled water, the samples heated for 3 h at 850 °C were single-phase MgAl₂O₄ with 30–50 nm particle size. Furthermore, the synthesized MgAl₂O₄ particles retained the size and morphology of the Al₂O₃ powders, which indicated that a template formation mechanism dominated the formation of MgAl₂O₄ by molten-salt method.