Hydrothermal Synthesis and Characterization of KxNa(1−x)NbO3 Powders

NaNbO₃, KNbO₃, and K _x Na_{(1− x )}NbO₃ powders were successfully prepared by the hydrothermal method. The phase of the products was identified to be orthorhombic structure by X-ray diffraction (XRD) technique, and the XRD results revealed that the x value of the K _x Na_{(1− x )}NbO₃ gradually increased with the increase in the ratio of K⁺ to Na⁺ in alkaline solution. The morphology and the microstructure were investigated by scanning electron microscopy, energy-dispersive spectroscopy, and transmission electron microscopy, and the results indicated that the ratio of K⁺ to Na⁺ in the solution had a great effect on the morphology and the size of products. Na_0.5K_0.5NbO₃ with morphotropic phase boundary composition could be synthesized when the molar ratio of K⁺ to Na⁺ was between 4:1 and 6:1 in the solution. A possible formation mechanism of the K _x Na_{(1− x )}NbO₃ crystal was also proposed based on the experimental results.     

Thermooxidative degradation of natural rubber/clay composite

The clay is treated with a reducing agent and an acid so as to obtain a clay containing various metal components with a variable‐valence state. Then, the clay is coprecipitated with natural rubber (NR) latex to prepare a vulcanized NR/clay composite. The degradation process of the NR/clay composite under hot air condition was studied dynamically by using a Fourier transform infrared spectrometer attaching an in situ sample cell and was also investigated using the TGA method. The test result obtained from the infrared spectrometry indicated that under low decomposition temperature, the decomposition products of the test samples mainly are ethylene, low molecular olefinic hydrocarbon, and carbonyl compounds. As the decomposition temperature rises, the low molecular olefinic hydrocarbon content decreases, the olefine with longer chain is formed, and a lot of alkane decomposition products are formed at the same time. When the content of the metal components with a variable‐valence state in clay such as Cu, Mn, Co, and Fe increases, the oxidation products containing the carbonyl group, the olefinic hydrocarbon, and CO₂ in the decomposition product of the test sample also increase. The TGA result clearly shows a shoulder peak that appears by the side of the main peak on the DTG curve of NR/clay composite. With the increase in the content of metal components with variable‐valence state in clay, the initial degradation temperature of the test sample (T₀), the degradation peak temperature (T_p1), and the final degradation temperature (T_f1) in first‐stage reaction, as well as the degradation peak temperature (T_p2) and the last final degradation temperature (T_f) in second‐stage reaction of all the test samples more or less shift to the direction of low temperature; besides, the activation energy (E) of the reaction of the test samples more or less decreases. This means that the metal components with variable‐valence state promote the oxidative degradation of the clay–rubber masterbatch. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3809–3815, 2006     

CpG-ODN对乙肝核酸疫苗及重组疫苗免疫效果的影响

目的研究CpG寡聚脱氧核苷酸(CpGODN)对乙肝核酸疫苗及重组(CHO细胞)疫苗免疫效果的影响。方法核酸疫苗实验组用CpGODN与乙肝核酸疫苗联合免疫BALBc小鼠,阳性对照组注射核酸疫苗,阴性对照组注射质粒pVAX1;重组疫苗分4个实验组,用CpGODN与不同剂量的重组疫苗配伍后分别免疫BALBc小鼠,阳性对照组注射重组疫苗,阴性对照组注射生理盐水。应用ELISA检测小鼠血清中的抗HBs水平。结果CpG与乙肝核酸疫苗组抗体阳转率比阳性对照组提高3倍,抗体水平提高2倍。CpG与重组疫苗组的阳转率和阳转时间均高于或早于CpG与核酸疫苗实验组。加入CpGODN后,即使重组疫苗用量减少3倍,诱导抗体水平和阳转率均无明显改变。结论CpGODN可提高乙肝核酸疫苗和重组疫苗的免疫效果,并使抗体产生的时间提前。     

基于ExtJS+SSH架构的民政服务信息系统设计与实现

针对传统民政办公系统结构复杂,不易维护和不易扩展的情况,提出了一种基于Ext JS+SSH(Struts2、Spring和Hibernate)架构的民政服务信息系统。按照Java EE的分层思想,通过Struts2框架实现了MVC模式,将用户界面、业务处理和数据访问三者分离,利用Spring框架统一管理系统对象以降低系统的耦合性,采用Hibernate框架实现业务数据的持久化以降低开发难度。实验结果表明,基于Ext JS和SSH架构的系统具有易维护、可扩展和运行稳定的特性。     

Morphology and thermomechanical properties of recycled PET–organoclay nanocomposites

Recycled PET/organoclay nanocomposites were prepared by melt intercalation process with several amounts (1, 3, and 5 wt %) of clay modified with quaternary ammonium salt (DELLITE 67G) dispersed in a recycled poly(ethylene terephthalate) (rPET) matrix. The resultant mechanical properties (modulus and yield strength) of the nanocomposites were found to be different from those of rPET. Wide angle X‐ray scattering (WAXS) and Transmission Electron Microscopy (TEM) measurements have shown that although complete exfoliation was not achieved, delaminated clay platelets could be observed. Thermal analysis did not show significant changes in the thermal properties from those of recycled PET. Mechanical testing showed that nanocomposite properties were superior to the recycled PET in terms of strength and elasticity modulus. This improvement was attributed to nanoscale effects and strong interaction between the rPET matrix and the clay interface, as revealed by WAXS and TEM. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1839–1844, 2007     

Optimality of partial adiabatic search and its circuit model

In this paper, we first uncover a fact that a partial adiabatic quantum search with \(O(\sqrt{N/M})\) time complexity is in fact optimal, in which \(N\) is the total number of elements in an unstructured database, and \(M\) ( \(M\ge 1\) ) of them are the marked ones(one) \((N\gg M)\) . We then discuss how to implement a partial adiabatic search algorithm on the quantum circuit model. From the implementing procedure on the circuit model, we can find out that the approximating steps needed are always in the same order of the time complexity of the adiabatic algorithm.     

Stabilization of positive switched systems with time-varying delays under asynchronous switching

This paper investigates the state feedback stabilization problem for a class of positive switched systems with time-varying delays under asynchronous switching in the frameworks of continuous-time and discrete-time dynamics. The so-called asynchronous switching means that the switches between the candidate controllers and system modes are asynchronous. By constructing an appropriate co-positive type Lyapunov-Krasovskii functional and further allowing the functional to increase during the running time of active subsystems, sufficient conditions are provided to guarantee the exponential stability of the resulting closed-loop systems, and the corresponding controller gain matrices and admissible switching signals are presented. Finally, two illustrative examples are given to show the effectiveness of the proposed methods.     

地老虎性信息素类似物E－7－十五碳烯－1－醇乙酸酯的合成

以紫胶桐酸为原料，经三步反应合成了地老虎性信息素类似物Ｅ－７－十五碳稀－１－醇乙酸酯。关键步骤是１６－羟基－９Ｅ－十六碳烯酸（２）在ＤＢＵ作用下的脱羧反应。     

基于重加权快速交替方向法的频谱感知

在认知无线电网络中,由于深衰落和低信噪比的影响,单个认知用户的宽带频谱检测性能较差,且算法复杂度较高。针对该问题,提出一种基于重加权快速交替方向法的频谱感知算法。利用目标函数的凸性,通过求导简化辅助变量的更新过程。对目标函数进行线性化处理,增加一个二次项,使待估变量更新时部分项线性化的增广拉格朗日函数成为严格凸函数,并使用迭代软阈值算法进行求解。在目标项中增加大权值抑制信号中的非零元素,获得接近于最小?0范数的解。实验结果表明,该算法能有效提高低信噪比环境下的检测概率和检测速度。     

Exothermic effect in the process of electron‐beam curing of epoxy resins

Temperature measurements have been performed in the process of electron‐beam curing of EB‐I and EB‐II epoxy resin systems. The influence of initiator content, resin type, and dose rate on the temperature of the systems was studied. Transverse and longitudinal temperatures of samples in the glass vessel were also analyzed. The nature of temperature curves varied with the different epoxy resin systems in the steel mold, but did not change with different contents of the initiator. At the same time, the heat had no effect on the gel fraction of epoxy resin systems. The temperature curve was greatly affected by the dose rate, and its peak value, peak width, and plateau value also increased with it. The transverse temperature of EB‐II glass vessel samples increased as the radiation dose increased and, in the same sample, the temperature reduced as the distance between the radiation center and the test point increased. The longitudinal temperature of EB‐I and EB‐II resin systems in a glass vessel decreased as the radiation depth increased. As the radiation dose increased, the temperature of the EB‐I resin system increased simultaneously, while that of the EB‐II resin system initially increased and then kept constant when the dose reached a certain value. The temperatures of these two resin systems decreased rapidly when the radiation process stopped. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2217–2222, 2004