Antennas and other electromagnetic applicators in biology andmedicine

Medical and biological applications of antennas can be classified into two broad groups: (1) therapeutic and (2) informational (including diagnostics and measurement of material electromagnetic (EM) properties). Most of these applications involve EM coupling into or out of the body which requires a device such as an antenna or other applicator. A common characteristic of many applications is the difficulty of coupling EM energy into the interior of the body without damaging the surface. Rapidly increasing computing power and new developments in numerical EM techniques are expected to have a great impact on the use of EM devices in medicine and biology     

Analysis of slots in nonradiating dielectric waveguide using the modal expansion method

A modal expansion method is used with the reciprocity and Poynting theorems to derive the admittance of inclined slots cut in the metal wall of a nonradiating dielectric (NRD) waveguide. Theoretical values of normalised conductance and susceptance are compared with previously reported experimental results and are found to be in good agreement.<>     

Analysis of multichannel narrow-band filters for image texturesegmentation

A model for texture analysis and segmentation using multiple oriented channel filters is analyzed in the general framework. Several different arguments are applied leading to the conclusion that the two-dimensional Gabor filters possess strong optimality properties for this task. Properties of the multiple-channel segmentation approach are analyzed. In particular, perturbations of textures from an ideal model are found to have important effects on the segmentation that can usually be ameliorated by simply preceding the segmentation process by a logarithmic operation and using a low-pass postfilter prior to making region assignments. The difficult problems of space-variant textures and multiple component textures are also considered. Local spatial frequency estimation approaches are suggested that use the responses as constraints in estimating the locally emergent texture frequencies. Complex texture aggregates containing multiple shared frequency components can be analyzed if the textures are distinct and few in number     

The influence of cathodic hydrogen charging on the mechanical behaviour of Al-4Zn-1Mg alloy

The effect of cathodic charging on the mechanical behaviour of Al-4Zn-1Mg alloy was studied. Hardening of the Al-4Zn-1Mg alloy surface, due to the hydrogen absorption, was observed. The ultimate tensile stress of the charged aluminium alloy was noted to be a non-linear function of the charging current density. The cathodically charged aluminium alloy exhibited brittle transgranular fracture at the surface layer, whereas ductile intergranular fracture was observed at the deeper layers of the same alloy.     

Correlation between synthesis conditions, coherently diffracting domain size and cubic phase stabilization in barium titanate

The Constant Rate Thermal Analysis method has been used under different experimental conditions to obtain barium titanate powder of very small grain size. Both a crystallographic and a dielectric study ham been carried out on samples sintered at different temperatures. It is deduced that the formation of small coherently diffracting domains is improved by the generation of oxygen vacancies and the cubic phase stabilization depends on the coherently diffracting domain size rather than on the particle size.     

Micellar polymerisation of ionic surfactants studied by conductimetry

The micellar polymerisation of ionic surfactants such as allyldodecyl-dimethylammonium bromide and 3-dodecyl-1-vinyl imidazolium iodide has been studied by conductimetry in aqueous solution. The polymerisation was carried out using two different sources of γ rays directed into solutions of surfactant above the critical micellar concentration. Conductimetry is shown to be a very good physicochemical method for analysis of these solutions. The results showed different behaviour for the two surfactants, which has highlighted a change in the structure of their aggregates which led to the assumption of an interaction between the polymers of high mass and different products of the polymerisation (oligomers, products of degradation, monomers etc.). Ultrafiltration experiments coupled with ¹H-NMR and conductivity analysis confirm these assumptions.     

Transient operation of a catalytic liquid-liquid plug flow reactor for kinetics measurements

A centrifugal partition chromatograph (CPC) was used as a liquid-liquid catalytic reactor for the isomerisation of hexen-3-ol into ethylpropylketone with a water soluble rhodium catalyst. Global mass transfer coefficients were measured and shown to depend on both the nature of the solute and the flow rate. Liquid-liquid partition isotherms were also determined with the CPC using elution chromatography. Finally, a reactor model was derived to account for the experimental results obtained both under stationary and transient (pulse) conditions. A parameter sensitivity evaluation is also presented.     

A machine vision system for high speed object tracking using a moments algorithm

A system has been developed for tracking the motion of objects in two dimensions in real-time. The system consists of a conventional CCD camera linked to a transputer-based frame grabber and an array of nine transputers. A parallel moments algorithm is used to extract the co-ordinates of the object's centre of gravity and orientation at field rate, i.e. 60 Hz. Since the position data are made available in real-time—with a small time delay—the system has the potential for inclusion in a feedback loop. Results are presented for tracking the trajectory of a chocolate bar diverted by an air jet. The potential of the system for higher sampling rates—up to 200 Hz—is discussed.