Increasing the moisture content of imitation cheese: effects on texture, rheology and microstructure

Increasing moisture content may be a practical and cost-effective means to control the functional properties of imitation cheese. Imitation cheeses with moisture contents of 46, 50, 52 and 54 g/100 g were manufactured. An increase in the moisture content of the imitation cheese resulted in significantly increased meltability, tan values and decreased hardness (all P<0.05). The relationship between moisture content (x) and meltability (y) was described by the model (r²=0.99). A linear relationship emerged between moisture content (x) and hardness (y), where (r²=0.95) but cohesiveness was unaffected by moisture content. Increasing the moisture content to 52 or 54 g/100 g led to pockets of free water within the cheese and larger but fewer fat globules. The maximum level of moisture that the cheese matrix can retain appears to be 54 g/100 g.     

Storm disturbance of sediment contaminants at a hot-spot in the Baltic Sea assessed by 234Th radionuclide tracer profiles

Fly ash sludges from an abandoned metal smelter were dumped into the shallow inner part of the Mecklenburg Bay until 1971, representing the most severe heavy metal contamination hot-spot along the German coast. Half of the dumped Zn (455 t) and Pb (173 t) inventory was found to be spread from the originally 0.5 km2 hot-spot site to a now 360 km2 affected adjacent area. Wave-driven resuspension during gale events produced large pulses of contaminated sediments from this hot-spot due to the only 23 m water depth. Instantaneous sediment mixing down to 10 cm occurs during such a wave event as evidenced by activity profiles of the short-lived radionuclide 234Th in sediment cores. According to these estimated sediment exchange fluxes in the transport bottom area, each wave event may have mobilized Zn and Pb pulses on the order of several hundreds of kilograms from the dump site, sufficient to build up a plume in sediments of the outer bay area. With each centimeter (approximately 5 yr) of additional natural sediment capping, however, the amount of metal remobilization would decrease by about 50%.     

Prevalence of Yersinia enterocolitica in fattening pigs

The prevalence of pathogenic Yersinia enterocolitica in pig herds was monitored during six trials (at four different farrow-to-finisher farms). Samples were taken throughout the whole rearing period from birth of the piglets to the final fattening stage, and different samples were taken from these pigs during the slaughter process. Environmental samples also were evaluated to identify potential sources of on-farm infection. Y. enterocolitica was isolated using irgasan-ticarcillin-potassium chlorate broth enrichment and cefsulodin-irgasan-novobiocin agar culture. Colonies were identified using bio- and serotyping methods and by PCR assay. Pathogenic Y. enterocolitica were not isolated from fecal samples from piglets and weaners. The only fecal samples positive for Y. enterocolitica were obtained during the fattening stage. The prevalence of Y. enterocolitica in fattening pig herds ranged between 0 and 65.4%. Y. enterocolitica isolates were detected at the abattoir in 38.4% of the tonsils, in 3.8% of the ileocecal lymph nodes, on 0.3% of the carcass surfaces before chilling, and on 0% of the carcass surfaces after chilling. Almost all isolates belonged to bioserotype 4/O:3. Only one strain was identified as O:9. All isolates contained the ail gene. The yopT gene was found in 99.1% of the farm isolates but in only 76.6% of the isolates found at the abattoir from the corresponding carcasses. Although a direct link between porcine isolates and human infection has not been demonstrated, the similarity of the bioserotypes in infected pigs and humans and the presence of virulence factors in porcine isolates should encourage further studies to determine the risk of transmission of Y. enterocolitica to humans from pigs and pork products.     

Transport of chemical and microbial compounds from known wastewater discharges: potential for use as indicators of human fecal contamination

The quality of drinking and recreational water is currently (2005) determined using indicator bacteria. However, the culture tests used to analyze forthese bacteria require a long time to complete and do not discriminate between human and animal fecal material sources. One complementary approach is to use chemicals found in human wastewater, which would have the advantages of (1) potentially shorter analysis times than the bacterial culture tests and (2) being selected for human-source specificity. At 10 locations, water samples were collected upstream and at two successive points downstream from a wastewaster treatment plant (WWTP); a treated effluent sample was also collected at each WWTP. This sampling plan was used to determine the persistence of a chemically diverse suite of emerging contaminants in streams. Samples were also collected at two reference locations assumed to have minimal human impacts. Of the 110 chemical analytes investigated in this project, 78 were detected at least once. The number of compounds in a given sample ranged from 3 at a reference location to 50 in a WWTP effluent sample. The total analyte load at each location varied from 0.018 microg/L at the reference location to 97.7 microg/L in a separate WWTP effluent sample. Although most of the compound concentrations were in the range of 0.01-1.0 microg/L, in some samples, individual concentrations were in the range of 5-38 microg/L. The concentrations of the majority of the chemicals present in the samples generally followed the expected trend: they were either nonexistent or at trace levels in the upstream samples, had their maximum concentrations in the WWTP effluent samples, and then declined in the two downstream samples. This research suggests that selected chemicals are useful as tracers of human wastewater discharge.     

Evaluation of two commercial lateral-flow test kits for detection of animal proteins in animal feed

Performance characteristics were evaluated for two lateral-flow test kits, Reveal for Ruminant in Feed (Neogen Corporation) and FeedChek (Strategic Diagnostics Inc.), designed to detect ruminant or terrestrial animal proteins in feeds. The stringent acceptance criteria used were developed by the Center for Veterinary Medicine Office of Research to identify test kits with comparable selectivity and sensitivity to microscopy and PCR assay, the analytical methods used by the U.S. Food and Drug Administration (FDA). Guidelines were developed for evaluating the selectivity, sensitivity, ruggedness, and specificity of these kits. These guidelines further stated that ruggedness and specificity testing would be performed only after a test passed both the selectivity and sensitivity assessments. Acceptance criteria for determining success were developed using a statistical approach requiring 90% probability of achieving the correct response, within a 95% confidence interval. A minimum detection level of 0.1% bovine meat and bone meal, consistent with the sensitivity of the methods used by the FDA, was required. Selectivity was assessed by testing 60 dairy feed samples that contained no added animal proteins; sensitivity was determined by evaluating 60 samples (per level of fortification) of the same feed that contained 0.025, 0.05, 0.1, 0.25, 0.5, 1, or 2% bovine meat and bone meal. The Reveal test passed the selectivity assessment but failed the sensitivity assessment, detecting only samples fortified at the 2% level and then only 17 to 33% of those samples, when read according to the label directions. The FeedChek test passed the sensitivity assessment but failed the selectivity assessment, with rates for false-positive results ranging from 34 to 38%, depending on the user. The sensitivity of the Reveal test was affected by the concentration of trace minerals present in the feed; concentrations toward the high end of the normal range prevented the detection of true positive feed samples containing bovine meat and bone meal. Better sensitivity assessments were obtained when lamb meal was used either alone or in combination with bovine meat and bone meal. The FeedChek test was not affected by the concentration of trace minerals or by the type of animal meal used. These results indicate that neither of the two tests is adequate for routine regulatory use.     

Occurrence, synthesis, and mammalian cell cytotoxicity and genotoxicity of haloacetamides: an emerging class of nitrogenous drinking water disinfection byproducts

The haloacetamides, a class of emerging nitrogenous drinking water disinfection byproduct (DBPs), were analyzed for their chronic cytotoxicity and for the induction of genomic DNA damage in Chinese hamster ovary cells. The rank order for cytotoxicity of 13 haloacetamides was DIAcAm > IAcAm > BAcAm > TBAcAm > BIAcAm > DBCAcAm > CIAcAm > BDCAcAm > DBAcAm > BCAcAm > CAcAm > DCAcAm > TCAcAm. The rank order of their genotoxicity was TBAcAm > DIAcAm approximately equal to IAcAm > BAcAm > DBCAcAm > BIAcAm > BDCAcAm > CIAcAm > BCAcAm > DBAcAm > CAcAm > TCAcAm. DCAcAm was not genotoxic. Cytotoxicity and genotoxicity were primarily determined by the leaving tendency of the halogens and followed the order I > Br > > Cl. With the exception of brominated trihaloacetamides, most of the toxicity rank order was consistent with structure-activity relationship expectations. For di- and trihaloacetamides, the presence of at least one good leaving halogen group (I or Br but not Cl) appears to be critical for significant toxic activity. Log P was not a factor for monohaloacetamides but may play a role in the genotoxicity of trihaloacetamides and possible activation of dihaloacetamides by intracellular GSH and -SH compounds.     

Isomers of dechlorane plus in Lake Winnipeg and Lake Ontario food webs

The extent of bioaccumulation of the syn- and anti-isomers of Dechlorane Plus (DP) is assessed in archived food web samples from Lake Winnipeg and Lake Ontario. Concentrations of the isomers were determined using purified analytical solutions of individual isomers as opposed to the technical mixture. The syn-isomer was consistently detected in all samples from both lakes; the anti-isomer was detected in all Lake Ontario samples, but only 45% of the samples from Lake Winnipeg. The pattern of bioaccumulation was different for the isomers in Lake Winnipeg. The anti-isomer was dominant in higher trophic level (TL) organisms like walleye [arithmetic mean +/- 1 x standard error: 730 +/- 120 pg/g, lipid weight (1w)] and goldeye (760 +/- 170 pg/g, Iw) while the syn-isomer dominated the lower TL organisms like zooplankton (550 +/- 40 pg/g, Iw) and mussels (430 +/- 140 pg/g, Iw). In Lake Ontario, the extent of bioaccumulation of the isomers and concentrations was greatest in the lower TL benthic organism, Diporeia (syn, 1307 +/- 554; and anti, 3108 +/- 898 pg/g Iw) and also high in zooplankton (syn, 719; and anti, 1332 pg/g Iw). This suggests that the isomers are bioavailable in sediment and that, despite their molecular size, diffusion from the water column into zooplankton can occur. Differences in the mean fractional abundance of the anti-isomer (mean fanti = mean concentration of the anti-isomer divided by sum of mean syn- and anti-concentrations) were pronounced in sediments between lakes (Lake Winnipeg mean fanti = 0.610, Lake Ontario mean fanti = 0.860) and the extent of enrichment (anti-) and depletion (syn-) of the isomers were more marked in Lake Winnipeg biota. There were also differences in the biomagnification potentials, as measured bythe trophic magnification factor (TMF), between the isomers in the Lake Winnipeg food web; no statistically significant TMFs for either isomer were found for the     

Traditionally Processed Beverages in Africa: A Review of the Mycotoxin Occurrence Patterns and Exposure Assessment

African traditional beverages are widely consumed food‐grade liquids processed from single or mixed grains (mostly cereals) by simple food processing techniques, of which fermentation tops the list. These beverages are very diverse in composition and nutritional value and are specific to different cultures and countries. The grains from which home‐processed traditional beverages are made across Africa are often heavily contaminated with multiple mycotoxins due to poor agricultural, handling, and storage practices that characterize the region. In the literature, there are many reports on the spectrum and quantities of mycotoxins in crops utilized in traditional beverage processing, however, few studies have analyzed mycotoxins in the beverages themselves. The available reports on mycotoxins in African traditional beverages are mainly centered on the finished products with little information on the process chain (raw material to final product), fate of the different mycotoxins during processing, and exposure estimates for consumers. Regulations targeting these local beverages are not in place despite the heavy occurrence of mycotoxins in their raw materials and the high consumption levels of the products in many homes. This paper therefore comprehensively discusses for the 1st time the available data on the wide variety of African traditional beverages, the mycotoxins that contaminate the beverages and their raw materials, exposure estimates, and possible consequent effects. Mycotoxin control options and future directions for mycotoxin research in beverage production are also highlighted.     

Processing and analytical characterisation of pulp-enriched cloudy apple juices

Pulp-enriched cloudy apple juices were manufactured from two apple varieties by blending of apple puree with natural cloudy apple juice in order to enrich bioactive secondary plant substances. Finishing of the puree with a 0.6-mm mesh screen and final product homogenisation revealed as the optimum processing technology for the novel 100% fruit beverage. The presence of large particles originating from the puree prevented long-term cloud stability, but due to the proportion of cloud-stable juice a complete phase separation did not occur. Optimal drinkability was achieved at a viscosity of 11.5 mPa s. Polyphenol compositions and concentrations were determined by means of RP-HPLC/PDA. The results ranged from 109 to 610 mg/l. All samples showed the typical polyphenol pattern of apples with dominating hydroxycinnamic acids followed by flavanols and flavonols. The puree addition to the cloudy apple juices increased the polyphenol concentrations by average 100%. Relatively, the highest increase could be observed for dimeric procyanidins. Different technological variants did not affect significantly the polyphenol concentrations. The dietary fibre contents of the pulp-enriched cloudy apple juices ranged from 5.8 to 9.4 g/l.     

Levels of essential and non-essential metals in leaves of the tea plant (Camellia sinensis L.) and soil of Wushwush farms,Ethiopia

Five tea clones of the Camellia assamica variety grown in Wushwush tea plantation farms, Ethiopia, were analyzed for their contents of essential, non-essential and toxic metals (K, Ca, Mg, Fe, Mn, Cu, Zn, Na, Cd and Pb) by atomic absorption flame emission spectroscopy. Both the tea leaves and the soils of the study farms showed similar accumulation patterns in their contents of the studied macronutrients. Among the macronutrient metals, K was the most abundant element in the tea leaves (17.7–24.8 mg/g) and the soils (7.14–9.73 mg/g). Mn was the predominant micronutrient heavy metal in the tea leaf tissues ranging between 501 and 1281 mg/kg. Level of Fe (29.6–100 mg/kg) in the leaf tissue was found to be the second most abundant micronutrient next to Mn whereas concentrations of Cu and Co were relatively lower both in the soil and tea samples. The toxic heavy metals Pb and Cd in the leaf tissues were present at levels too low to be detected by the analytical technique used in this study. The soils were found to be acidic (pH 5.04–5.49) with high organic matter (5.48–6.02%). Fe was the most abundant metal followed by Mn, Na and Zn in the soils. Unlike the tea leaves, the soils were found to contain traces of the toxic metal, Cd (0.02–1.10 mg/kg). The levels of most of the metals determined in this study compared well with those reported for tea leaves from some other parts of the world.