Steel mill slags energy potential: the case of the steel factory of Arcelor-Mittal in Asturias (Spain)

Slag accounts for most of the residuals or by-products of the steel manufacturing process and represents a not inconsiderable amount of energy waste and CO₂ emissions. Energy recovery from steel mill slags is not actually performed because of the difficulty of the industrial implementation, but the actual demand and the incentives for new electricity generation plants based on renewable energies and on industrial waste heat recovery offer a new opportunity to evaluate the feasibility of this process. This article presents a review of the slag energy potential on a global scale, and a proposal for a recovery plant in the factories of Arcelor-Mittal in Asturias (Spain), based on a steam Rankine cycle for electricity production in a turbine. The plant production and viability have been analyzed using the typical technical and economic values for this kind of plant. Also, a parametric study has been performed on the heat recuperator efficiency and investment rate.     

Evaluation of the impact of access to electricity: A comparative analysis of South Africa,China, India and Brazil

Most developing countries include rural electrification programs in their efforts to improve social conditions. There are, however, several obstacles to the evaluation of such programs and therefore of their social, economic, environmental and energy impacts on the target population, particularly on impoverished communities located in remote areas. Evaluation of the efficacy of public policies aimed at rural electrification in South Africa, China, India and Brazil enables such actions to be quantified and re-considered so as to bolster the sustainability of their planning and implementation and also so as to enable comprehension of the significance of access to electricity in relation to other aspects of the drive to improve living standards. The provision of electric energy amounts to more than access to a public service and should be considered an essential right, in a context of social equity and justice, which permits social integration and the access to other equally essential services.     

Developing and applying a GIS-assisted approach to evaluate visual impact in wind farms

Wind energy represents one of the most important renewable resources. Wind energy is a clean, renewable and its benefits are considered greater than the disadvantages. However, even though wind farms represent environmentally friendly projects, they frequently generate public resistance.One of the main disadvantages of wind farm construction projects is their poor aesthetic integration into the landscape. On the other hand, landscape impact of wind farms could be minimised if the visual impact is previously evaluated.As regards with the European legislation, the procedure of environmental impact assessment study is necessary before a wind farm project could be established. In contrast, there is not an objective methodology to assess the visual impact of wind farms.The aim of this work was to develop a methodology to predict and evaluate, before its construction, the visual impact of wind farms, taking into account the visualscape from different observation points.Proposed methodology could help to determine and evaluate the best location for new wind farm projects. Moreover, this method could be used as a consulting tool for public organization and private institutions, being quick, concise and clear.     

Effective thermal conductivity of functionally graded random micro-heterogeneous materials using representative volume element and BEM

This work introduces a numerical methodology for the computation of the effective thermal conductivity (ETC) of random micro-heterogeneous materials using representative volume elements and the Fast Multipole Boundary Element Method (FMBEM). The methodology is applied to solve two-dimensional foam-like materials consisting of random distributions of circular isolated holes. The computed ETC values are successfully used to predict the temperature fields of two materials with functionally graded ETCs. Numerical and analytical results are experimentally validated. The proposed methodology is flexible and versatile, as it is capable to account for both, the geometrical and topological details of the material microstructure.     

An 8-Bit Digitally Controlled Programmable Phase Shifter Circuit for Sinusoidal Signals with 252∘ Phase Control Range

In this paper, the synthesis, design, and implementation of a programmable phase shifter circuit for sinusoidal signals is presented. The proposed circuit, built-up herein with operational amplifiers (OPAMPs), high precision resistors and low voltage switches, consists of a digitally controlled amplitude attenuator in combination with a single-tone orthogonalizer. Experimental results agree with theoretical background: the attained phase range was 252^° in 256 steps with a median step of 0.9^°. The inaccuracy of the circuit was determined to be of 0.03 %. Contrary to other OPAMP approaches for sinusoidal signals reported in the literature and based on a first-order all-pass filter structure, the approximation suggested in this work is based on a different concept. The achieved results demonstrate the functionality of the system for the case of a sinusoidal signal with frequency of 1 kHz. Notwithstanding, the proposed architecture can be extended to operate at higher frequencies by using different building blocks with larger bandwidth. Furthermore, it can be extended as well to work out with other periodic input waveforms, like triangular shapes or square waves, with the use of an appropriate orthogonalizer.     

Contribution of the Tyr-1 in Plantaricin149a to Disrupt Phospholipid Model Membranes

Plantaricin149a (Pln149a) is a cationic antimicrobial peptide, which was suggested to cause membrane destabilization via the carpet mechanism. The mode of action proposed to this antimicrobial peptide describes the induction of an amphipathic α-helix from Ala7 to Lys20, while the N-terminus residues remain in a coil conformation after binding. To better investigate this assumption, the purpose of this study was to determine the contributions of the Tyr1 in Pln149a in the binding to model membranes to promote its destabilization. The Tyr to Ser substitution increased the dissociation constant (K_D) of the antimicrobial peptide from the liposomes (approximately three-fold higher), and decreased the enthalpy of binding to anionic vesicles from −17.2 kcal/mol to −10.2 kcal/mol. The peptide adsorption/incorporation into the negatively charged lipid vesicles was less effective with the Tyr1 substitution and peptide Pln149a perturbed the liposome integrity more than the analog, Pln149S. Taken together, the peptide-lipid interactions that govern the Pln149a antimicrobial activity are found not only in the amphipathic helix, but also in the N-terminus residues, which take part in enthalpic contributions due to the allocation at a lipid-aqueous interface.     

Seed oils of ten traditional Portuguese grape varieties with interesting chemical and antioxidant properties

To increase the potential and better exploring of grape seeds that are an important wine-industrial waste, oils of ten traditional Portuguese grape varieties were evaluated in relation to their vitamin E content (tocopherols and tocotrienols), fatty acid profile, as well as, antioxidant properties. Our results showed that the grape-seed oils were a good source of γ-tocotrienol (499–1575 mg/kg), α-tocopherol (85.5–244 mg/kg) and α-tocotrienol (69–319 mg/kg). Concerning fatty acid profile, linoleic (C18:2cc), oleic (C18:1), palmitic (C16:0) and stearic (C18:0) acids were the predominant. Grape-seed oils demonstrated to be a good source of polyunsaturated fatty acids (PUFAs) (63.64–73.53%), whereas monounsaturated fatty acid (MUFA) and saturated fatty acid (SFA) ranged between 14.19–21.29% and 11.64–14.94%, respectively. Interesting values of DPPH and ABTS radical scavenging activities were also obtained. This study demonstrated that these seeds may be reused and their oils incorporated in other food products, taking into account the compounds with positive effects on human health that are present in their composition.     

A model for the position and ring eccentricity in transverse sections of Norway spruce logs

=0.677, when the disc eccentricity is estimated by the model) and excellent (r²=0.923), when the disc eccentricity is measured and integrated as input in the model. This result motivates further studies concerning the automatic detection of the pith position by image analysis.     

A modeling approach to the effect of resin characteristics on parison formation in extrusion blow molding

The most critical stage in the extrusion blow‐molding process is the parison formation, as the dimensions of the blow‐molded part are directly related to the parison dimensions. The swelling due to stress relaxation and sagging due to gravity are strongly influenced by the resin characteristics, die geometry, and operating conditions. These factors significantly affect the parison dimensions. This could lead to a considerable amount of time and cost through trial and error experiments to get the desired parison dimensions based upon variations in the resin characteristics, die geometry, and operating conditions. The availability of a modeling technique ensures a more accurate prediction of the entire blow‐molding process, as the proper prediction of the parison formation is the input for the remaining process phases. This study considers both the simulated and the experimental effects of various high‐density polyethylene resin grades on parison dimensions. The resins were tested using three different sets of die geometries and operating conditions. The target parison length was achieved by adjusting the extrusion time for a preset die gap opening. The finite element software BlowParison® was used to predict the parison formation, taking into account the swell and sag. Good agreements were found between the predicted parison dimensions and the experimental data. POLYM. ENG. SCI., 2009. Published by Society of Plastics Engineers