Maternal Flaxseed Oil During Lactation Enhances Bone Development in Male Rat Pups

Flaxseed oil is an alpha linolenic acid source important in the growth and body development stage; furthermore, this acid acts on adipose tissue and bone health. The aim of this study was to evaluate body composition, fatty acid composition, hormone profile, retroperitoneal adipocyte area and femur structure of pups at weaning, whose mothers were fed a diet containing flaxseed oil during lactation. After birth, pups were randomly assigned: control (C, n = 12) and flaxseed oil (FO, n = 12), rats whose mothers were treated with diet containing soybean or flaxseed oil. At 21 days, the pups were weaned and body mass, length, body composition, biochemical parameter, leptin, osteoprotegerin, osteocalcin, fatty acids composition, intra‐abdominal fat mass and femur structure were analyzed. FO showed (p < 0.05): higher body mass (+12 %) and length (+9 %); body fat mass (g, +45 %); bone mineral density (+8 %), bone mineral content (+55 %) and bone area (+35 %), osteocalcin (+173 %) and osteoprotegerin (+183 %). Arachidonic acid was lower (p < 0.0001), alpha‐linolenic and eicosapentaenoic were higher (p < 0.0001). Intra‐abdominal fat mass was higher (+25 %), however, the retroperitoneal adipocytes area was lower (?44 %). Femur mass (+10 %), distance between epiphyses (+4 %) and bone mineral density (+13 %) were higher. The study demonstrates that adequate flaxseed oil content during a lactation diet plays an important role in the development of pups.     

Effect of polymerization catalyst technology on the melt processing stability of polyethylenes,Part 3: Additives blends performance

This article considers the interaction between additives that occur during the stabilization process. The simultaneous effects of the additives and associated interactions on melt processing stability and processing discoloration were of particular interest. Melt stability is an important factor to consider because physical changes in the processed polymer can occur during the compounding and fabrication steps. Furthermore, discoloration is one of the most important problems affecting commercial polymers. Most discoloration manifests itself as yellowing, especially in the case of polyolefins. Although yellowing can often be associated with degradation processes caused by various agents, such as light or heat, this is not always the case; yellowing can also be due to the interaction of additives in the stabilizer packages. Blends of primary antioxidants (AOs), secondary AOs, and hindered amine light stabilizers have been studied with the intention of further improving stabilization performance together with cost reduction of the stabilized polymer. Although synergism between AOs and a stabilizer is fairly common, antagonism was also observed in terms of melt flow protection and in color stability in some of the AOs tested. The effects of a range of thermal and light stabilizers on the melt stability (investigated via multiple pass extrusion) and color stability of three different polyethylenes (PEs) were examined. The PEs varied in terms of the catalyst system used to synthesize the polymers and included a high‐density polyethylene (HDPE) produced by using a chromium‐based Phillips catalyst and two linear low‐density polyethylenes (LLDPEs) produced via chromium‐based metallocene and titanium‐based Ziegler‐Natta catalysts. The apparent lack of influence of polymerization catalyst system on the mode of stabilizer interaction should lead to the reassessment of stabilizer formulation strategies in relation to PE type/catalyst system and associated commercial/economic considerations. J. VINYL ADDIT. TECHNOL., 22:117–127, 2016. © 2014 Society of Plastics Engineers     

Role of Methyl Salicylate on Oviposition Deterrence in Arabidopsis thaliana

Plants attacked by herbivores have evolved different strategies that fend off their enemies. Insect eggs deposited on leaves have been shown to inhibit further oviposition through visual or chemical cues. In some plant species, the volatile methyl salicylate (MeSA) repels gravid insects but whether it plays the same role in the model species Arabidopsis thaliana is currently unknown. Here we showed that Pieris brassicae butterflies laid fewer eggs on Arabidopsis plants that were next to a MeSA dispenser or on plants with constitutively high MeSA emission than on control plants. Surprisingly, the MeSA biosynthesis mutant bsmt1-1 treated with egg extract was still repellent to butterflies when compared to untreated bsmt1-1. Moreover, the expression of BSMT1 was not enhanced by egg extract treatment but was induced by herbivory. Altogether, these results provide evidence that the deterring activity of eggs on gravid butterflies is independent of MeSA emission in Arabidopsis, and that MeSA might rather serve as a deterrent in plants challenged by feeding larvae.     

The effect of compatibilization on the behavior of a polycarbonate/polymer liquid crystal blend

Polymer liquid crystalline materials (PLC) blended with engineering plastics (EP) have the potential to reduce viscosity and increase the modulus of the EP, particularly if the PLC is in a favorable fibrillar morphology. A major deficiency in these blends—as with many other immiscible polymeric systems—is poor failure properties. In this paper, polycarbonate (PC) and a rigid, all-aromatic commercial PLC are blended and a third resin, a copolymer of methyl methacrylate and N-methyl-dimethyl-glutarimide is included as a compatibilizing agent. Characterization of the binary and ternary blends is carried out using rheological, mechanical, morphological, and dynamic mechanical characterization techniques. Binary blends of PLC in a PC matrix result in an immiscible, nodular morphology with low failure stresses. The addition of the copolymeric compatibilizer—particularly one with reactive functionalities—is found to improve tensile strength and yield a fibrillar blend morphology. It is proposed that this may be due to the compatibilizer reducing interfacial tension and adhering to the blend phases, rather than by causing a major change in blend viscosity.     

Diffusivity of a drug preservative in bromobutyl rubber

Sorption of phenylethyl alcohol (a model drug preservative) by bromobutyl rubber (a polymer used in drug packaging) is characterized by relatively low apparent diffusivities at room temperature (D ≈︁ 10⁻¹⁰ cm²/s) and a high solubility that leads to considerable swelling of the polymer. The sorption curves for thin samples exhibit non-Fickian anomalies, which are normally observed only in glassy polymers, including two-stage sorption and sorption overshoot. The desorption curves were much more Fickian. The swelling kinetics were very slow, and true equilibrium was not reached in the time frame of most of the experiments, which ranged up to 78 days. This produced lower apparent diffusivities and higher activation energies for sorption compared to desorption.     

Human Chorionic Gonadotropin and Early Embryogenesis: Review

Human chorionic gonadotropin (hCG) has four major isoforms: classical hCG, hyperglycosylated hCG, free β subunit, and sulphated hCG. Classical hCG is the first molecule synthesized by the embryo. Its RNA is transcribed as early as the eight-cell stage and the blastocyst produces the protein before its implantation. This review synthetizes everything currently known on this multi-effect hormone: hCG levels, angiogenetic activity, immunological actions, and effects on miscarriages and thyroid function.     

Formulation of a Biodegradable Detergent for Cleaning Oily Residues Generated during Industrial Processes

The use of toxic petroleum-based heavy oils is common in industrial processes. The cleaning of machines, equipment, and other surface covered in these oils is achieved with expensive products that are often also toxic and harmful to both the health of workers and the environment. The present paper proposes the development of a sustainable biodetergent made from plant-based materials. Tests were performed to determine the properties of the biodetergent in terms of its surfactant and emulsifying capacities, stability, toxicity, and the removal of heavy oil from glass plates and metallic surfaces. The formulation was composed of a natural solvent (cottonseed oil), a plant-based surfactant agent (saponin), and two natural stabilizers (carboxymethylcellulose and glycerine). The formulation was stable, nontoxic, and highly efficient, removing 100% of the heavy oil from glass and metallic surfaces. This solution developed in this study could be used in diverse industries with the need to clean machines and parts encrusted with oil and grease as well as the cleaning of floors covered with petroleum-based residues. A preliminary analysis of the economic feasibility of using the detergent was carried out at a Brazilian power plant. Besides the reduction in environmental impact due to the use of a nontoxic, biodegradable product as well as the reduction in health risks to workers associated with toxic cleaning products, this new product can have a considerable impact on the market as an environmentally friendly solution.     

Tumor Necrosis Factor α and Interleukin-1β Acutely Inhibit AgRP Neurons in the Arcuate Nucleus of the Hypothalamus

Obesity-associated low-grade inflammation favors weight gain, whereas systemic infection frequently leads to anorexia. Thus, inflammatory signals can either induce positive or negative energy balance. In this study, we used whole-cell patch-clamp to investigate the acute effects of three important proinflammatory cytokines, tumor necrosis factor α (TNF-α), interleukin-6, and interleukin-1β (IL-1β) on the membrane excitability of agouti-related peptide (AgRP)- or proopiomelanocortin (POMC)-producing neurons. We found that both TNF-α and IL-1β acutely inhibited the activity of 35–42% of AgRP-producing neurons, whereas very few POMC neurons were depolarized by TNF-α. Interleukin-6 induced no acute changes in the activity of AgRP or POMC neurons. Our findings indicate that the effect of TNF-α and IL-1β, especially on the activity of AgRP-producing neurons, may contribute to inflammation-induced anorexia observed during acute inflammatory conditions.     

A 1D High Performance Thin Layer Chromatography Method Validated to Quantify Phospholipids Including Cardiolipin and Monolysocardiolipin from Biological Samples

The aim of this study is to identify high performance thin layer chromatography (HPTLC) conditions allowing the separation and quantification of mammalian cellular phospholipids (PLs) (sphingomyelin, phosphatidylcholine, phosphatidylserine, phosphatidylinositol, phosphatidylethanolamine, and especially phosphatidic acid, cardiolipin, and monolysocardiolipin, these latter two being specifically located in mitochondria membranes). In order to make this method faster and easier, a 1D HPTLC method is chosen, testing several eluents as well as several staining methods. A pre‐conditioning of HPTLC plates with boric acid and a copper staining reagent followed by carbonization are selected for the quality of PL separation and homogeneity of staining. The selected conditions are discussed and the method validation is performed according to the International Conference on Harmonization guidelines. Linearity is effective between 1 and 8 µg and limit of quantification is between 0.5 and 2.3 µg depending on PL classes. Precision measurements show coefficients of variation <6%, and when amounts are close to the detection limit, <12%. Lipid extracts of tumor cell lines or isolated mitochondria are used to assess PL profiles. This shows that the HPTLC method can be used routinely to follow level variations of PLs. Practical Applications: The changes in PL composition play a crucial role in tumor processes and regulate cellular functions modulating cellular signaling or mitochondrial metabolism. The simple and cost‐effective 1D HPTLC method that is developed is applied to lipid extracts of whole tumor cells or hepatocyte‐isolated mitochondria. It is sensitive as well as precise to detect variations of phosphatidic acid or cardiolipin levels linked to physio‐pathological conditions. It can also be used to investigate the composition changes of other membrane PLs. Moreover, with a simultaneous analysis of 14 samples/standards on the same plate (six plates per day), this method is adapted for large series of samples.