A novel assay method for glycosphingolipid deacylase by enzyme-linked immunochemical detection of lysoglycosphingolipid

Lysoglycosphingolipids consist of a sphingoid long-chain base and monosaccharide or complex sugar, and they lack the fatty acyl group present in native glycosphingolipids. Less than 1 pmol of lyso-Forssman glycolipid and lysoganglioside GM1 were detected on a thin-layer chromatogram by an enzyme-linked immunochemical coloration method with anti-Forssman glycolipid antibody (FOM-1) and cholera toxin B subunit, respectively. Each spot between 1 and 100 pmol lyso-Forssman glycolipid was immunostained as densely as that of the same amount of native Forssman glycolipid. The density of the lyso-Forssman glycolipid spots increased proportionally with increment in the amount of lysoglycolipid. The density of spots of 0.2–100 pmol lysoganglioside GM1 was also proportional to the amount of each lyso-GM1 spot. These results indicated that less than 1 to 100 pmol of deacylated glycosphingolipid was quantifiable by the immunochemical coloration method with sugar chain-specific antibodies. Glycosphingolipid deacylase, which cleaved an amide bond between the sphingoid long-chain base and fatty acyl chain in ceramide of glycosphingolipid, was assayed by detecting the lyso-Forssman glycolipid produced. Lipophilic compounds, recovered from an aliquot of the reaction mixture of Forssman glycolipid and crude enzyme at appropriate times, were analyzed by thin-layer chromatography. It was found that lyso-Forssman glycolipid was produced in the first 1–2 h by the enzyme and production increased with incubation time. This coloration method is more sensitive and specific than the visualization method with a non-specific reagent such as orcinol-sulfuric acid reagent.     

Dielectric Depression and Dispersion in Electrophoretically Fabricated BaTiO3 Ceramic Films

Dielectric depression and dispersion were observed in BaTiO3 ceramic films fabricated by electrophoretic deposition followed by sintering. The dielectric constants were depressed down to 6800–4600 around the Curie point ( T _C ). The dielectric dispersion occurred above T _C . These dielectric properties are attributable to a surface layer formed during sintering. XRD analysis indicated that the surface layer was a hexagonal-like BaTiO₃ phase. A mixed solvent of acetylacetone and alcohol employed in the present work may have been responsible for the formation of the surface layer.     

Reworkable adhesives composed of photoresponsive azobenzene polymer for glass substrates

ABSTRACT

A reversible isothermal phase transition between the liquid and solid states in response to light irradiation was achieved in side chain-type azobenzene polymers. These materials can be used as adhesives that are detachable without applying any mechanical and thermal stress but also repeatedly reworkable because of their photoinduced liquefaction and solidification properties. The adhesive strength to glass plates was more than 3 MPa in single lap shear tests. This value is three times higher than previously reported and is sufficiently strong for glass substrates.     

Effect of Ganglioside GM3 Synthase Gene Knockout on the Glycoprotein N‐Glycan Profile of Mouse Embryonic Fibroblast

The structural and clinical significance of cellular glycoproteins and glycosphingolipids (GSLs) are often separately discussed. Considering the biosynthetic pathway of glycoconjugates, glycans of cell‐surface glycoproteins and GSLs might partially share functions in maintaining cellular homeostatis. The purpose of this study is to establish a general and comprehensive glycomics protocol for cellular GSLs and N‐glycans of glycoproteins. To test the feasibility of a glycoblotting‐based protocol, whole glycans released both from GSLs and glycoproteins were profiled concurrently by using GM3 synthase‐deficient mouse embryonic fibroblast GM3(?/?). GM3(?/?) cells did not synthesize GM3 or any downstream product of GM3 synthase. Instead, expression levels of o‐series gangliosides involving GM1‐b and GD1‐α increased dramatically, whereas a‐/b‐series gangliosides were predominantly detected in wild‐type (WT) cells. We also discovered that glycoprotein N‐glycan profiles of GM3(?/?) cells are significantly altered as compared to WT cells, although GM3 synthase is responsible only for GSLs synthesis and is not associated with glycoprotein N‐glycan biosynthesis. The present approach allows for high‐throughput profiling of cellular glycomes enriched by different classes of glycoconjugates, and our results demonstrated that gene knockout of the enzymes responsible for GSL biosynthesis significantly influences the N‐glycans of glycoproteins.     

Kinetics of Free-Radical Polymerization of Vinylbenzyl-Terminated Macromonomers

Vinylbenzyl-terminated polystyrene (PS) macromonomers were prepared by the direct reaction of living PS anions with p-chloro-methylstyrene (CMS). The propagation rate constant (k _p) was obtained from free-radical polymerization of PS macromonomers in the presence of 1-buten-3-ol as a degradative chain transfer agent by using gel permeation chromatography (GPC) analysis. In this condition, the polymer radicals were terminated by a unimoiecular mechanism. Subsequently, we studied the radical propagation step of vinylbenzyl-terminated diblock poly[styrene (S)-b-isoprene (I)] and poly[S-b-2-vinylpyridine (2VP)] macromonomers in benzene. The vinylbenzyl groups at the terminal ends of diblock macromonomers apparently take the concentrated state in micelles. These results are discussed from the point of view of polymer-polymer reactions.     

Pervaporation separation of water/ethanol mixtures through polysaccharide membranes. II. The permselectivity of chitosan membrane

The separation of water/alcohol mixtures through chitosan membrane was investigated. The degree of the deacetylation of chitosan did not affect the selectivity of the membrane in the separation of the water/ethanol mixture. The selectivity of the chitosan membrane was affected by the specific salts such as CoSO₄, ZnSO₄, and MnSO₄ and it increased when the salts were present in the feed mixture or the membrane was pretreated with the salt solution. This behavior would be explained by the contraction of the “holes” produced by the thermal motion of polymer chains and this contraction would be correlated with the conformation change of chitosan molecule due to the formation of complexes with metal ions.     

Formation Mechanism and Synthesis of Apatite-Type Structure Ba2+xLa8−x(SiO4)6O2−δ

The formation process of Ba₂La₈(SiO₄)₆O₂ was clarified using thermogravimetry–differential thermal analysis (TG-DTA) and a high-temperature powder X-ray diffraction (HT-XRD) method. Phase changes identified from the HT-XRD data surprisingly corresponded to the weight loss and/or endothermic peaks observed in the TG-DTA curves. Raw material with the composition Ba₂La₈(SiO₄)₆O₂ was completely reacted at 1400°C and produced only an apatite-type compound without a secondary phase. Moreover, the synthesis of Ba_{2+ x} La_{8− x} (SiO₄)₆O_2−δ crystals with x = 0–2 was attempted using a solid-state reaction.     

High temperature water–gas shift reaction over hollow Ni–Fe–Al oxide nano-composite catalysts prepared by the solution-spray plasma technique

The effect of Fe content in Ni–Fe–Al oxide nano-composites prepared by the solution-spray plasma technique on their catalytic activity for the high temperature water–gas shift reaction was investigated. The composites showed a hollow sphere structure, with highly dispersed Fe–Ni particles supported on the outer surface of the spheres. When the water–gas shift reaction was performed over an Ni–Al oxide composite catalyst without Fe, undesired CO methanation took place predominantly compared to the water–gas shift reaction, and significant amounts of hydrogen were consumed. When appropriate amounts of Fe were added to the Ni–Al oxide composite catalyst during the plasma process, methanation was suppressed remarkably, without serious loss of activity for the water–gas shift reaction. The catalyst was characterized by STEM, XRD and H₂ chemisorption measurements.     

Kinetic roughening transition and missing regime transition of melt crystallized polybutene-1 tetragonal phase: growth kinetics analysis

The morphology and lateral growth rate of isotactic polybutene-1 (it-PB1) have been investigated for crystallization from the melt over a wide range of crystallization temperatures from 50 to 110°C. The morphology of it-PB1 crystals is a rounded shape at crystallization temperatures lower than 85°C, while lamellar single crystals possess faceted morphology at higher crystallization temperatures. The kinetic roughening transition occurs around 85°C. The nucleation and growth mechanism for crystallization does not work below 85°C, since the growth face is rough. However, the growth rate shows the supercooling dependence derived from the nucleation and growth mechanism. The nucleation theory seems still to work even for rough surface growth. Possible mechanisms for the crystal growth of this polymer are discussed.