Heat Treatment and Chemical Composition of Fatty Acids and Rosin Acids Mixtures: Effects on Their Thermal Properties and Morphology

Mixtures of fatty acids and rosin acids are industrially important products utilized as a raw material for several purposes. Their thermal properties, especially cold stability and crystallization behavior is also important. Several fatty acid and rosin acid mixtures both from industrial products and from commercially available fatty and rosin acids were prepared and treated for 30 min at 80 °C under an inert atmosphere. Thereafter, the mixture was cooled to the desired temperature. Determination of the cloud point, chemical analysis of liquid and solid phase, thermal analysis by differential scanning calorimetry as well as morphology analysis by scanning electron microscopy were performed. The results revealed that crystallization was more rapid when it occurred at 10 °C compared to 25 °C. The crystal sizes increased with decreasing the crystallization temperature. Furthermore, crystals were of irregular shape and agglomerated when rapid cooling of the mixture occurred. Chemical analysis revealed that liquid phase was enriched with stearic acid, whereas crystals contained large amounts of abietic, dehydroabietic and linoleic acids. The cloud point of the mixtures increased with increasing amount of stearic and rosin acids. Dehydroabietic acid addition improved the cold stability of the synthetic fatty acid–rosin acids mixture.     

Time-resolved GISAXS and cryo-microscopy characterization of block copolymer membrane formation

Time-resolved grazing-incidence small-angle X-ray scattering (GISAXS) and cryo-microscopy were used for the first time to understand the pore evolution by copolymer assembly, leading to the formation of isoporous membranes with exceptional porosity and regularity. The formation of copolymer micelle strings in solution (in DMF/DOX/THF and DMF/DOX) was confirmed by cryo field emission scanning electron microscopy (cryo-FESEM) with a distance of 72 nm between centers of micelles placed in different strings. SAXS measurement of block copolymer solutions in DMF/DOX indicated hexagonal assembly with micelle-to-micelle distance of 84–87 nm for 14–20 wt% copolymer solutions. GISAXS in-plane peaks were detected, revealing order close to hexagonal. The d-spacing corresponding to the first peak in this case was 100–130 nm (lattice constant 115–150 nm) for 17 wt% copolymer solutions evaporating up to 100 s. Time-resolved cryo-FESEM showed the formation of incipient pores on the film surface after 4 s copolymer solution casting with distances between void centers of 125 nm.     

Blends of natural rubber and polyurethane latices studied by 1H wideline and 13C MAS solid‐state NMR

¹H wideline and ¹³C magic‐angle spinning NMR have been used to study the morphology and dynamics of latex‐cast and solution‐cast film blends of natural rubber (NR) and a polyurethane (PU) based on poly(?‐caprolactone) diol and isophorone di‐isocyanate. ¹H T₁ and T_1ρ relaxation times have been measured, and the extent of interpenetration of the NR and PU constituents has been monitored using the Goldman–Shen technique. The NMR spectra and relaxation properties indicated that the NR and PI constituents largely occupy separated domains on a distance scale of >10 nm. The Goldman–Shen experiments indicated that there was slightly greater contact between NR and PU in the solution‐cast samples than in the latex‐cast. The tensile properties of the films have been measured. The tensile strength and initial Young's modulus pass through a maximum at a PU content of about 50 wt%. © 2002 Society of Chemical Industry     

Effects of dressing containing plant sterol on serum cholesterol concentration and the safety evaluation in borderline or mildly hypercholesterolemic Japanese subjects

In a placebo-controlled double-blind study, we examined the effects of dressing containing plant sterol (PS) on blood lipids and the safety in Japanese borderline or mildly hypercholesterolemic subjects. Fifty-nine subjects [total cholesterol (TC) concentration > or = 200 mg/dL] were randomly divided into two groups and were given daily 15 g of dressing containing 800 mg of PS [PS(+)-group] or without PS [PS(-)-group] for 12 weeks. Every 4 weeks, fasting blood was examined and subjective symptoms were analyzed. Serum TC, low-density lipoprotein cholesterol (LDL-C) and apolipoprotein B (ApoB) concentrations did not change in the PS(-)-group, while TC and ApoB significantly decreased in the PS(+)-group at 8 and 12 weeks and LDL-C at 4, 8 and 12 weeks. Moreover, serum TC, LDL-C and ApoB concentrations were significantly lower than those of PS(-)-group at 8 and 12 weeks. Other laboratory tests were all in normal ranges and no adverse events were observed. The results indicated that PS-containing dressing decreased serum TC, LDL-C and ApoB concentrations in borderline or mildly hypercholesterolemic subjects. It is therefore proved that the dressing containing PS is helpful in maintaining blood cholesterol level normal and hence, the health of Japanese.     

Round robin on indentation fracture resistance of silicon carbide ceramics by using a powerful optical microscope

Reproducibility of indentation fracture resistance, K_IFR of silicon carbides sintered with B and C was evaluated by a round robin with ten laboratories. When the crack length was measured with an optical microscope at a low magnification of ～100×, K_IFR varied widely from 3.43 to 4.20 MPa m^1/2, whereas those obtained by a powerful microscopy with both an objective lens of 40× and a traveling stage exhibited a consistent value of 3.20±0.12 MPa m^1/2. The wide scatter of K_IFR for the former measurements was attributed mainly to the variation in misreading of the crack length. It was revealed that the high resolving power of the objective lens of 40× enabled to find exact crack tips easily, which resulted in the good matching of K_IFR between laboratories for the latter case. It was suggested that the observation of indentations with powerful optics was effective for improving the reproducibility of the IF method.     

Syntheses of group 4 transition metal complexes bearing 2-pyridinethiolate ligands and their catalytic activities for ethylene polymerization

Titanium bis(2-pyridinethiolate) complexes, Ti(6-R-SPy)₂(NMe₂)₂ (6-R-SPy = 6-R-2-pyridinethiolate, 3a: R = H; 3b: R = Me; 3c: R = Ph; 3d: R = C₆H₄-4-Me; 3e: R = C₆H₄-4-t-Bu; 3f: R = C₆H₃-3,5-Me₂), and the titanium bis(2-pyridinolate) complexes, Ti(6-Ph-OPy)₂(NMe₂)₂ (6-Ph-OPy = 6-phenyl-2-pyridinolate, 8) were prepared by treating Ti(NMe₂)₄ with 2 equiv. of 6-R-2-pyridinethiol or 6-Ph-2-pyridinol. The cis-configuration of the diamido moieties in the pseudo octahedral geometry was elucidated by X-ray crystallography for 3a. Reaction of M(NMe₂)₄ (M = Ti, Zr) with 4 equiv. of 2-pyridinethiol cleanly gave tetrakis(pyridinethiolate) complexes, M(6-H-SPy)₄·THF (6: M = Ti; 7: M = Zr). The triangular dodecahedral geometries of 6 and 7 were also revealed by X-ray crystallography. These complexes catalyzed ethylene polymerization upon activation with MAO (methylaluminoxane) or MMAO (modified MAO). The catalytic activities of titanium bis(6-aryl-pyridinethiolate) systems were found to be remarkably higher than that of titanium bis(6-methyl-pyridinethiolate) system. Among the complexes synthesized in this study, Ti[6-(C₆H₃-3,5-Me₂)-SPy]₂(NMe₂)₂ (3f)/MMAO showed the highest activity (1200 kg/Ti-mol h atm) for ethylene polymerization at 60 °C under atmospheric pressure. In contrast, the activity of the corresponding 6-aryl-pyridinolate system 8/MMAO was rather low (9.3 kg/Ti-mol h atm). Both the N-S chelating structure and the bulky aryl substituents are essential for the high activities of the 6-aryl-pyridinethiolate complexes.     

Temperature and pressure conditions for the appropriate performance of charge and mass resolutions in balloon-borne CR-39 track detector for the heavy cosmic rays

We experimentally determined the suitable conditions of temperature and air pressure for measuring charge and mass compositions of heavy cosmic rays using CR-39 track detectors during long-duration, high-altitude balloon flights. The experiments were carried out utilizing Fe ion beams from Heavy Ion Medical Accelerator (HIMAC). Changes in the track registration sensitivity with temperature were studied at temperatures between 213 and 293 K. The charge and mass shifts around Fe ions are possibly 0.11 cu (charge unit) and 0.47 amu (atomic mass unit) at the temperature deviation between 227 and 243 K at balloon altitude. Decrease in track registration sensitivity as air pressure decreases has been observed between 13 Pa and 27 kPa. The charge and mass shifts around Fe ions are inferred to be 0.02 cu and 0.09 amu, respectively, when pressure varies between 20 and 27 kPa. During balloon flight, air pressure drops below this; therefore, care must be taken to keep the temperature and air pressure of CR-39 detectors within acceptable limits.     

Constitution of the Al Corner in the Ternary Al–Ge–Mg Phase Diagram

Powder Metallurgy and Metal Ceramics - A fragment of the Al corner in the ternary Al–Ge–Mg phase diagram has been constructed. Experimental methods have shown that the tie-line of the L...     

Effects of Ospemifene on Drug Metabolism Mediated by Cytochrome P450 Enzymes in Humans in Vitro and in Vivo

The objective of these investigations was to determine the possible effects of the novel selective estrogen receptor modulator, ospemifene, on cytochrome P450 (CYP)-mediated drug metabolism. Ospemifene underwent testing for possible effects on CYP enzyme activity in human liver microsomes and in isolated human hepatocytes. Based on the results obtained in vitro, three Phase 1 crossover pharmacokinetic studies were conducted in healthy postmenopausal women to assess the in vivo effects of ospemifene on CYP-mediated drug metabolism. Ospemifene and its main metabolites 4-hydroxyospemifene and 4′-hydroxyospemifene weakly inhibited a number of CYPs (CYP2B6, CYP2C9, CYP2C19, CYP2C8, and CYP2D6) in vitro. However, only CYP2C9 activity was inhibited by 4-hydroxyospemifene at clinically relevant concentrations. Induction of CYPs by ospemifene in cultured human hepatocytes was 2.4-fold or less. The in vivo studies showed that ospemifene did not have significant effects on the areas under the plasma concentration-time curves of the tested CYP substrates warfarin (CYP2C9), bupropion (CYP2B6) and omeprazole (CYP2C19), demonstrating that pretreatment with ospemifene did not alter their metabolism. Therefore, the risk that ospemifene will affect the pharmacokinetics of drugs that are substrates for CYP enzymes is low.     

Tunable Terahertz Device Using Refractive Index Control

We measured the thermal dependencies of the refractive index and the absorption coefficient of high-resistivity silicon. We found that the refractive index varied slightly with temperature, and the absorption coefficient was very low and remained approximately constant as the temperature was changed. As a result, the conditions for terahertz propagation in silicon could be controlled by changing the refractive index without any absorption loss. As one application of this effect, we developed a terahertz time delay generator that can generate a terahertz time delay by changing the temperature of the medium through which the terahertz beam passes, without the need for any mechanical delay. We demonstrated generation of a terahertz time delay of approximately 6.6 ps.