Crystallographic Structure and Ferroelectricity of (AxLa1−x)2Ti2O7 (A = Sm and Eu) Solid Solutions with High Tc

The solubility and ferroelectric properties of (A_xLa_1?x)₂Ti₂O₇ (A = Sm and Eu) solid solutions were investigated. The crystallographic structure of the solid solutions was studied using X‐ray diffraction and Raman spectroscopy. The solubility limits of Eu and Sm in (A_xLa_1?x) ₂Ti₂O₇ were found to be greater than x = 0.5 and 0.8, respectively. The solid solutions had a monoclinic perovskite‐like layered structure (PLS), similar to that of the pure La₂Ti₂O₇, when x was less than the solubility limit. When x was above the solubility limit the materials were biphase. The biphases of (Sm_xLa_1?x)Ti₂O₇ (x = 0.9) consisted of (Sm_xLa_1?x)₂Ti₂O₇ with PLS and pure Sm₂Ti₂O₇ with pyrochlore structure, and the biphases of (Eu_xLa_1?x)Ti₂O₇ (x = 0.6, 0.7, and 0.8) consisted of (Eu_xLa_1?x)₂Ti₂O₇ with PLS structure and La³⁺ doped Eu₂Ti₂O₇ with pyrochlore structure. The effect of A‐site substitution on the properties of La₂Ti₂O₇ was investigated by measuring the dielectric permittivity and loss at different frequencies and temperatures. The highest piezoelectric constant d₃₃ was 2.8 pC/N for (Sm_0.1La_0.9)Ti₂O₇.     

Azimuthally oscillating membrane emulsification for controlled droplet production

A novel membrane emulsification (ME) system is reported consisting of a tubular metal membrane, periodically azimuthally (tangentially) oscillated with frequencies up to 50 Hz and 7 mm displacement in a gently cross flowing continuous phase. A computational fluid dynamics (CFD) analysis showed consistent axial shear at the membrane surface, which became negligible at distances from the membrane surface greater than 0.5 mm. For comparison, CFD analysis of a fully rotating ME system showed local vortices in the continuous phase leading to a variable shear along the axis of the membrane. Using an azimuthally oscillating membrane, oil‐in‐water emulsions were experimentally produced with a median diameter of 20–120 μm, and a coefficient of variation of droplet size of 8%. The drop size was correlated with shear stress at the membrane surface using a force balance. In a single pass of continuous phase, it was possible to achieve high dispersed phase concentrations of 40% v/v. © 2015 American Institute of Chemical Engineers AIChE J, 61: 3607–3615, 2015     

The effect of scale and interfacial tension on liquid–liquid dispersion in in-line Silverson rotor–stator mixers

The effect of scale, processing conditions, interfacial tension and viscosity of the dispersed phase on power draw and drop size distributions in three in-line Silverson rotor–stator mixers was investigated with the aim to determine the most appropriate scaling up parameter. The largest mixer was a factory scale device, whilst the smallest was a laboratory scale mixer. All the mixers were geometrically similar and were fitted with double rotors and standard double emulsor stators. 1 wt.% silicone oils with viscosities of 9.4 mPa s and 339 mPa s in aqueous solutions of surfactant or ethanol were emulsified in single and multiple pass modes. The effect of rotor speed, flow rate, dispersed phase viscosity, interfacial tension and scale on drop size distributions was investigated.     

Combined crease recovery finishing and pigment printing

The combined application of crease recovery finishing (using a dimethyloldihydroxyethylene urea-based finish) and pigment printing is evaluated in this study. The use of a small amount of ammonium chloride in a combined print–finish process induces significant pigment print paste viscosity losses. However, the catalyst 2-aminoethanesulphonic acid produces negligible viscosity reduction when used in the combined print–finish process, coupled with the desired levels of finish and pigment print performance. Similar dry crease recovery, breaking load, colour strength and colour fastness properties are achieved by using 2-aminoethanesulphonic acid in the combined print–finish process relative to the conventional print–finish process.     

Effects of acute and 14-day coenzyme Q10 supplementation on exercise performance in both trained and untrained individuals

Background

To determine whether acute (single dose) and/or chronic (14-days) supplementation of CoQ10 will improve anaerobic and/or aerobic exercise performance by increasing plasma and muscle CoQ10 concentrations within trained and untrained individuals.

Methods

Twenty-two aerobically trained and nineteen untrained male and female subjects (26.1 ± 7.6 yrs, 172 ± 8.7 cm, 73.5 ± 17 kg, and 21.2 ± 7.0%) were randomized to ingest in a double-blind manner either 100 mg of a dextrose placebo (CON) or a fast-melt CoQ10 supplement (CoQ10) twice a day for 14-days. On the first day of supplementation, subjects donated fasting blood samples and a muscle biopsy. Subjects were then given 200 mg of the placebo or the CoQ10 supplement. Sixty minutes following supplement ingestion, subjects completed an isokinetic knee extension endurance test, a 30-second wingate anaerobic capacity test, and a maximal cardiopulmonary graded exercise test interspersed with 30-minutes of recovery. Additional blood samples were taken immediately following each exercise test and a second muscle biopsy sample was taken following the final exercise test. Subjects consumed twice daily (morning and night), 100 mg of either supplement for a period of 14-days, and then returned to the lab to complete the same battery of tests. Data was analyzed using repeated measures ANOVA with an alpha of 0.05.

Results

Plasma CoQ10 levels were significantly increased following 2 weeks of CoQ10 supplementation (p < 0.001); while a trend for higher muscle CoQ10 levels was observed after acute CoQ10 ingestion (p = 0.098). A trend for lower serum superoxide dismutase (SOD) was observed following acute supplementation with CoQ10 (p = 0.06), whereas serum malondialdehyde (MDA) tended to be significantly higher (p < 0.05). Following acute ingestion of CoQ10, plasma CoQ10 levels were significantly correlated to muscle CoQ10 levels; maximal oxygen consumption; and treadmill time to exhaustion. A trend for increased time to exhaustion was observed following 2 weeks of CoQ10 supplementation (p = 0.06).

Conclusion

Acute supplementation with CoQ10 resulted in higher muscle CoQ10 concentration, lower serum SOD oxidative stress, and higher MDA levels during and following exercise. Chronic CoQ10 supplementation increased plasma CoQ10 concentrations and tended to increase time to exhaustion. Results indicate that acute and chronic supplementation of CoQ10 may affect acute and/or chronic responses to various types of exercise.     

Melanin Distribution in Human Skin: Influence of Cytoskeletal,Polarity, and Centrosome-Related Machinery of Stratum basale Keratinocytes

Melanin granules cluster within supra-nuclear caps in basal keratinocytes (KCs) of the human epidermis, where they protect KC genomic DNA against ultraviolet radiation (UVR) damage. While much is known about melanogenesis in melanocytes (MCs) and a moderate amount about melanin transfer from MC to KC, we know little about the fate of melanin once inside KCs. We recently reported that melanin fate in progenitor KCs is regulated by rare asymmetric organelle movement during mitosis. Here, we explore the role of actin, microtubules, and centrosome-associated machinery in distributing melanin within KCs. Short-term cultures of human skin explants were treated with cytochalasin-B and nocodazole to target actin filaments and microtubules, respectively. Treatment effects on melanin distribution were assessed by the Warthin–Starry stain, on centrosome-associated proteins by immunofluorescence microscopy, and on co-localisation with melanin granules by brightfield microscopy. Cytochalasin-B treatment disassembled supra-nuclear melanin caps, while nocodazole treatment moved melanin from the apical to basal KC domain. Centrosome and centriolar satellite-associated proteins showed a high degree of co-localisation with melanin. Thus, once melanin granules are transferred to KCs, their preferred apical distribution appears to be facilitated by coordinated movement of centrosomes and centriolar satellites. This mechanism may control melanin’s strategic position within UVR-exposed KCs.     

Microchemical Characterization of Alluvial Gold Grains as an Exploration Tool

There is considerable variation in the composition of native gold and the nature of minerals co-existing with it, and this reflects differences in the geological environment and chemistry of ore-forming processes. In areas where gold-bearing mineralization is subject to active fluvial erosion, especially in temperate climatic regimes, any discrete grains of native gold pass into alluvial sediment with little modification. The chemical characteristics of alluvial grains and the nature of preserved mineral inclusions provide a signature which points back to the type of source mineralization. This signature may be established using electron probe microanalysis and scanning electron microscopy and can be interpreted to provide information about the original bedrock mineralization. Identification of the type of source mineralization using the technique at an early stage in regional exploration can help focus attention on targets with the most potential economic importance.     

Multiscale, Multiphysics Numerical Modeling of Fusion Welding with Experimental Characterization and Validation

Various physical interfacial phenomena occur during the process of welding and influence the final properties of welded structures. As the features of such interfaces depend on physics that resolve at different spatial scales, a multiscale and multiphysics numerical modeling approach is necessary. In a collaborative research project Modeling of Interface Evolution in Advanced Welding, a novel strategy of model linking is employed in a multiscale, multiphysics computational framework for fusion welding. We only directly link numerical models that are on neighboring spatial scales instead of trying to link all submodels directly together through all available spatial scales. This strategy ensures that the numerical models assist one another via smooth data transfer, avoiding the huge difficulty raised by forcing models to attempt communication over many spatial scales. Experimental activities contribute to the modeling work by providing valuable input parameters and validation data. Representative examples of the results of modeling, linking and characterization are presented.     

Designing architectured materials

Architectured or “hybrid” materials are combinations of two or more materials or of materials and space, configured in such a way as to have attributes not offered by any one material alone. This paper describes the rationale for creating architectured materials and criteria for deciding which combinations and configurations show the most promise.