Polymorphic Mixes of Zirconia from a Borate Glass Melt

Yttria-stabilized zirconia crystals were produced by devitrification within a sodium borate glass containing zirconia and yttria. Yttria (3, 6, or 10 mol%) in zirconia was added as part of the starting material of the glass batch. Phase separation and crystallization occurred during the cooling and subsequent heat treatment of the glasses. The zirconia powders obtained after leaching away the sodium borate had surface areas between 16 and 48 m²/g. X-ray diffraction traces revealed a mixture of monoclinic, tetragonal, and cubic phases, the phase ratios of which depended on the composition of the glass.     

Comparative study of lithium fluoride and graphite by atomic force microscopy (AFM)

The atomic force microscope (AFM) offers the possibility to image the topography of insulating as well as conductive surfaces. Highly oriented pyrolytic graphite (HOPG) was chosen as an example for a layered material and compared to single crystalline lithium fluoride (LiF). Both materials are easily prepared and inert at ambient pressure. Furthermore they are well characterized by Helium atom scattering experiments and other techniques. On HOPG atomic resolution has been achieved. Distortions can be observed which we interpret as a frictional effect. In addition we performed large area scans where we seldomly observed dislocations. For the first time we present measurements on LiF, showing steps of one unit cell height. On larger areas the surface of LiF showed terraces, separated by steps of variable heights, ranging from a few ångströms to 100 Å. We used a static method to get information about the distance dependence of the force between lever and sample. By slowly expanding and retracting the sample piezo and simultaneous measurement of the lever deflection, plots were recorded, showing the force as a function of sample position. The results were compared with theoretical calculations. We could determine the tip radius and found differences between LiF and HOPG being characteristic for the samples.     

THERMAL DEHYDRATION OF THE SODIUM CARBONATE HYDRATES

A thermal gravimetric method was employed to explore the course of dehydration of Na₂CO₃ · 10 H₂O, and Na₃CO₃ · H₂O particles. Experimental data were amassed both in the temperature-increasing and constant temperature mode. Very small sample masses were used in an effort to eliminate an effect of heat and mass transfer processes on the rate of reaction. Kinetic equations of Arrhenius type were proposed for two stages of the dehydration and tested against the results collected by experiment.     

Effects of freezing and frozen storage on the microstructure and texture of ewe's milk cheese

Semi-hard ewe's milk cheeses, frozen immediately after manufacture either slowly at –35 °C or rapidly at –80 °C and stored at –20 °C for 4 months were studied for microstructural and textural characteristics during subsequent ripening. Two control groups were used to establish the effect of freezing: the fresh unfrozen cheese and cheese thawed immediately after freezing. Freezing proper did not result in any marked changes in the textural parameters of the cheeses, but considerable changes were found in slowly frozen cheeses after 4 months of frozen storage. Shear strength values were lower in all frozen and stored cheeses, particularly in cheese samples frozen slowly compared to those in the unfrozen control batch. This parameter and firmness values were significantly lower in both slowly and rapidly frozen cheeses at the completion of ripening. Ripening tended to offset differences in elasticity, noticeable in the cheeses during the first 30 days of ripening. Light microscopy and electron microscopy revealed small cracks and ruptures in the cheeses which could not be observed by the naked eye. More extensive damage to the cheese microstructure was found in slowly frozen cheese samples stored frozen for 4 months.     

The use of upflow anaerobic filter and AnSBR for wastewater treatment at ambient temperature

This research was carried out in order to study the effect of the temperature and hydraulic retention time (HRT) on the start-up and steady-state performance of upflow anaerobic filter (UAF) and anaerobic sequencing batch reactor (AnSBR). A mixture of synthetic substrate (glucose and sodium acetate) and real municipal wastewater was used as a laboratory substrate. The temperature (in the range 9-23 degrees C) and HRT (in the range 6-46 h) were selected as the most decisive technological parameters for a practical application. Average removal efficiency of COD found for tested anaerobic reactors were 56-88% (AnSBR) and 46-92% (UAF) depending on used temperature and HRTs. Based on the observed results, the use of AnSBR and UAF in practice seems to be a potential technology for (pre)-treatment of wastewater produced by small communities.     

Application of image analysis method to detection and counting of glass fibers from filter samples

Man-made vitreous fibers (MMVFs) are noncrystalline substances made of glass, rock or slag and are widely used as thermal or acoustic insulation materials. There is continued concern about their potential health impacts and thus, their dosimetry and behavior in the environment still require study using filters to collect fiber samples. After deposition or exposure measurements of MMVFs it is often necessary to analyze the filters with deposited fibers. This task is tedious, time-consuming, and requires skill. Therefore, many researchers have tried to simplify or automatize fiber detection and quantification. This article describes features of our in-house software, which automatically detects and counts fibers in images of filter samples. The image analysis is based on the use of a histogram equalization and an adaptive radial convolution filter that enhances fiber contrast and thus, improves the fiber identification. The accuracy of the software analysis was verified by comparison with manual counting using ordinary phase-contrast microscopy method. The correlation between the methods was very high (coefficient of determination was 0.977). However, there were some discrepancies caused by false identifications, which led to implementation of manual corrective functions.

Copyright © 2016 American Association for Aerosol Research     

Extraction fractionation of segmented polyurethanes according to composition

Extraction of solid polyester-based segmented polyurethanes by chloroform and its mixtures with an increasing amount of N,N-dimethylformamide is described. Unlike the precipitation in a solvent-nonsolvent system, where fractionation according to the molecular weight dominates, the extraction can resolve the copolymer into fractions differing in the content of diisocyanate units. © 1995 John Wiley & Sons, Inc.