Acetazolamide challenge and technetium-99m-ECD versus iodine-123-IMP SPECT in chronic occlusive cerebrovascular disease

We compared the acetazolamide challenge test using 99mTc-ECD SPECT and 123I-IMP SPECT images in patients with chronic occlusive cerebrovascular disease. We also evaluated the usefulness of linearization correction for acetazolamide challenge test of 99mTc-ECD SPECT. METHODS: Twenty patients with unilateral chronic occlusive cerebrovascular disease (10 patients had middle cerebral arterial lesion and 10 had internal carotid lesion) were included in the study. Split-dose (a dose fractioning was 1:2), and sequential SPECT technique was used for 99mTc-ECD SPECT studies while only acetazolamide challenge test studies for 123I-IMP SPECT were performed. Permeability surface area product model (PS model) and back-diffusion model (Lassen's correction) were used for linearization correction of acetazolamide challenge with 99mTc-ECD SPECT. RESULTS: Six of 16 patients with reduced vasodilatory capacity in 123I-IMP SPECT were underestimated by 99mTc-ECD SPECT acetazolamide challenge test. Relative ECD uptake normalized by cerebellar uptake compared with IMP uptake showed a nonlinear relationship, indicating relatively less uptake in high flow range. The underestimations of limited vasodilatory capacity observed in 99mTc-ECD SPECT without linearization correction was modified by linearization algorithm. However, the effect of correction based on PS model was superior than that of Lassen's correction. The corrected 99mTc-ECD uptake ratio, based on PS model, and IMP uptake ratio demonstrated a better linear relationship than that of Lassen's correction. CONCLUSION: Technetium-99m ECD SPECT corrected based on the PS model is a better method of linearization for evaluating cerebrovascular reserve using acetazolamide challenge.     

Hair analysis for drugs of abuse. VI. The excretion of methoxyphenamine and methamphetamine into beards of human subjects

The excretion of methoxyphenamine (MOP) and methamphetamine (MA) into beards has been studied. Six healthy male subjects orally took 50 mg of MOP at a single dose and 7 doses for a successive 7 days. Their beard hairs were collected by an electric shaver every morning until MOP disappeared from the beard. After washing with 0.1% SDS, the beard samples were extracted with methanol-5 N HCl (20:1) under ultra-sonication for 1 h and the solution was kept overnight. MOP in the extract was determined by GC/MS using deuterium labelled MOP as an internal standard after trifluoroacetyl-derivatization. The drug concentrations in beard and the reproducibility of analysis were compared with the three procedures, unwashed, 0.1% SDS (wash I) and the additional ethanol (wash II) wash. The drug concentration in beard after SDS wash was 0.5-2.5 ng/mg lower than that in unwashed beard during the first 5-6 days. The drug concentration in beard after ethanol wash was much lower than that in the unwashed beard. The drug excreted into beard was detected 10 approximately 12 days for a single dose and 12-14 days for 7 doses after the last dosage at the cut off level of 1 ng/mg. On the contrary, the drug excreted in urine was not detected after more than 3 days after use. O-Desmethyl MOP, a major metabolite of MOP, was also detected in beard. The procedures were applied to the detection of MA in beard of MA abusers. It was realized that a beard sample was more useful than a urine sample assuming a longer detection.     

Fabrication of low-loss single-mode fibres

Low-loss single-mode fibres with GeO2-doped SiO2 cores have been made by the c.v.d. method and the loss spectrum from 0.6 to 1.8 ?m measured. The minimum loss of the fibre with suitably designed parameters, characterised by the refractive-index difference and the core diameter, was 0.75 dB/km at 1.05 ?m.     

Effect of Alumina Addition on the Tetragonal-to-Monoclinic Phase Transformation in Zirconia–3 mol% Yttria

The tetragonal-to-monoclinic martensitic phase transformation in ZrO–3 mol% Y₂O₃ (PSZ) containing 0 to 12 wt% Al₂O₃ was investigated by dilatometry, XRD, and SEM-EDS methods. The propagation of the transformation into the specimen interiors was suppressed by the addition of Al₂O₃. The grain size was independent of the addition of Al₂O₃. Both Y₂O₃ and Al₂O₃ segregated at grain boundaries. From this segregation behavior, it was suggested that a certain compound or phase of Y₂O₃–Al₂O₃ could be formed at grain boundaries, which would presumably prevent the propagation of the transformation into interiors of PSZ-containing Al₂O₃.     

Characterization of the diacylglycerol acyltransferase activity in the membrane fraction from a fungus

In an attempt to clarify the mechanism of lipid accumulation inMortierella ramanniana var.angulispora, diacylglycerol acyltransferase (DGAT) in the membrane fraction from this fungus was characterized. The enzyme had an optimum pH of 7.0–7.5, and enzyme activity was blocked by SH-reagents. Metal ions were not essential for maintaining DGAT activity.n-Octyl-β-d-glucoside, 3-[(3-cholamidopropyl)dimethylammonio]-1-propanesulfonate and Tween 80 were found to preserve activity, while Triton X-100 and sucrose monolaurate inhibited it. As the inhibition of DGAT activity by Triton X-100 was overcome by the addition of diacylglycerol (DG), the dependency of DGAT activity on exogenous DG was determined in the presence of 0.1% Triton X-100. DGAT activity in the membrane fraction was traced in fungi cultured for different time periods or in media at different carbon to nitrogen (C/N) ratios. Although the increase in total lipid content with culture time was accompanied by an increase in DGAT activity, total lipid changes related to changes in C/N ratio did not correlate with DGAT activity. Factors other than DGAT activity in the membrane fraction would appear to be involved in the regulation of total lipid content in this fungus.     

Status report of the JAERI on-line isotope separator

A mass separator has been connected on line to the 20 MV tandem accelerator at JAERI/Tokai. Using a thermal ion source, decay spectroscopic studies have been carried out for neutron-deficient isotopes in the mass 120–130 region. A study with collinear laser spectroscopy has begun recently. The present paper describes the status of the mass separator facility together with some experimental results.     

Loss increases due to chemical reactions of hydrogen in silica glass optical fibers

Loss increases due to the chemical reactions of hydrogen are investigated for GeO2-doped, GeO2. F-doped, and pure silica core fibers. Dissolved hydrogen gas causes the hydroxyl loss increase as well as the short-wavelength loss increase in the first two fiber types at high temperatures. The short-wavelength loss increase is attributed to two kinds of ultraviolet absorption increases. Doping fluorine reduces both of these loss increases as well as enhances the activation energy of the hydroxyl formation.     

FT-IR ATR spectroscopy of the edge surface of pyrolytic graphite and its surface/PVC interface

The edge surface of pyrolytic graphite (PG) has been oxidized by electrochemical and oxygen plasma treatments. The structure of the oxidized edge surfaces of PG and the interaction between the oxidized surface and poly(vinyl chloride) (PVC) have been studied by means of Fourier transform — infrared attenuated total reflection (FT-IR ATR) spectroscopy. Phenolic hydroxyl groups and functional groups with a carbonyl group are present on the untreated and all oxidized edge surfaces. For all the surfaces, some of the phenolic hydroxyl groups are linked by hydrogen bonds to each other or functional groups with a carbonyl group, part of the carboxyl groups also being linked by hydrogen bonds to each other. Lactone, carboxyl, and quinone structure moieties are formed on the edge surface by the electrochemical treatment. Among the moieties, quinones are mainly introduced to the edge surface by the severe electrochemical treatment. Quinones are not present on the untreated and the plasma-treated edge surfaces. FT-IR ATR spectra provide evidence for the existence of hydrogen bonds between the > C = O groups present on the edge surface and PVC.