Study of hot air generator with quasi-uniform temperature using concentrated solar radiation: Influence of the shape parameters

The non-uniformity of the air temperatures and the slow flow rate at the plane collector exit constitute the main cause of the limitations of the solar drying systems. In order to obtain an uniform and a variable flow rate for different uses, a hot air generator using concentrated solar radiation is proposed. To improve the thermal efficiency of the generator, a study of the influence of different shape parameters is realized. The generator is simulated in the laboratory while investigating the flow induced by a circular disc heated uniformly by Joule effect at constant temperature. This disc is placed at the entrance of an open ended vertical cylinder of a larger diameter. Thermal radiation emitted by the hot disc heats the cylinder wall. The heating of the fluid at the cylinder-inlet generates a thermosiphon flow around the one created by the hot disc. The comparison of the velocity and the temperature profiles of the resulting flow permits to determine the influence of the cylinder height, the vertical source-cylinder spacing and the radius ratio, on the resulting flow at the system exit. Thus, a judicious choice of the shape parameters entails an improvement of the flow rate as well as the thermal flux absorbed by the air and a good homogenization of the air temperature at the generator exit.     

Handwritten word recognition with character and inter-characterneural networks

An off-line handwritten word recognition system is described. Images of handwritten words are matched to lexicons of candidate strings. A word image is segmented into primitives. The best match between sequences of unions of primitives and a lexicon string is found using dynamic programming. Neural networks assign match scores between characters and segments. Two particularly unique features are that neural networks assign confidence that pairs of segments are compatible with character confidence assignments and that this confidence is integrated into the dynamic programming. Experimental results are provided on data from the U.S. Postal Service.     

Sensitivity analysis of the scattering parameters of microwave filters using the adjoint network method

A novel approach is presented to calculate the sensitivities of the scattering parameters of microwave filters obtained with the full‐wave mode‐matching (MM) technique. Using only the MM simulation of the original network, the sensitivities of the scattering parameters with respect to all designable parameters are obtained. The adjoint network method (ANM) is applied to the generalized scattering matrices of the different filter components. This guarantees good accuracy of the calculated sensitivities. The implementation details are discussed for N‐resonator ridge waveguide filters. Excellent agreement is obtained between the sensitivities calculated using ANM and those obtained using the expensive central differences. © 2006 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2006.     

Mechanical properties of iron processed by severe plastic deformation

In the present study, the mechanical properties of Fe processed via severe plastic deformation (equal-channel angular pressing (ECAP)) at room temperature were investigated for the first time. The grain size of annealed Fe, with an initial grain size of about 200 μm, was reduced drastically during ECAP. After eight passes, the grain size reaches 200 to 400 nm, as documented by means of transmission electron microscopy (TEM). The value of microhardness during pressing increases 3 times over that of the starting material after the first pass and increases slightly during subsequent pressing for higher-purity Fe. Examination of the value of microhardness after eight passes as a function of post-ECAP annealing temperature shows a transition from recovery to recrystallization, an observation that resembles the behavior reported for heavily deformed metals and alloys. The tensile and compression behaviors were examined. In tension, a drop in the engineering stress-engineering strain curve beyond maximum load was observed both in the annealed Fe and the ECAP Fe. This drop is related to the neck deformation. The fracture surface, examined by scanning electron microscopy (SEM), shows vein patterns, which is different from the dimples found on the fracture surface of annealed Fe. In compression, an initial strain-hardening region followed by a no-strain-hardening region was observed in the ECAP Fe. The yield strength in tension of the ECAP Fe was observed to be higher than that in compression. The strengthening mechanisms and softening behavior are discussed.     

Structural Characterization of Different Asphaltenes of Kuwaiti Origin

Asphaltenes obtained by precipitation from crude Kuwaiti oils have been analyzed by proton magnetic resonance (¹H-NMR), carbon-13 nuclear magnetic resonance (¹³C-NMR) and Infrared (IR) spectral techniques. The molecular weight and elemental analysis were also determined. These combined analytical data were used for the characterization of these Kuwaiti oils. The asphaltenes molecular weights range from approximately 4200-6500 with an H/C ratio of 0.91-1.1 with an average 45-71% aromatic carbons. The average side chain length was of 4-6 carbons. It can also be concluded that the asphaltenes under investigation contain 5-9 sets of condensed aromatic rings joined together by bridges of alkyl chains or other hetero atoms and the average number of each of these sets of condensed aromatic rings is nearly 7. There are a number of alicyclic rings and condensed alicyclic rings in asphaltene. The IR spectra showed main molecular groups including OH, NH, SH, C=O and aliphatic and aromatic C-H's.     

Modified register-exchange Viterbi decoder for low-power wireless communications

In this paper, a new implementation of the Viterbi decoder (VD), based on a modified register-exchange (RE) method, is proposed. Conceptually, the RE method is simpler and faster than the trace-back (TB) method. However, the disadvantage of the RE method is that every bit in the memory must be read and rewritten for each bit of information decoded. The proposed implementation adopts the "pointer" concept: a pointer is assigned to each register. Instead of copying the contents of one register to another, the pointer which points to the first register is altered to point to the second register. Power-dissipation, performance, memory size, and the speed of the survivor sequence management are analyzed for both the TB method, and the proposed RE method. The analysis indicates an average power reduction of 23% for the new VD, compared to the power dissipation of the VD described in the literature for the third generation of wireless applications. The bit-error rate is 10/sup -5/ with a signal-to-noise ratio of approximately 6.3 dB for a continuous, uncontrolled encoded sequence. Moreover, the memory requirements of the new implementation are reduced by half. All the read and write operations in the survivor sequence management are executed at the data rate frequency which increases the maximum frequency.