Investigation on the morphological and mechanical properties of (polyamide 6)/(poly[styrene‐co‐acrylonitrile])/(poly[styrene‐b‐{ethylene‐co‐butylene}‐b‐styrene]) ternary blends

In this work, ternary polymer blends based on (polyamide 6)/(poly[styrene‐co‐acrylonitrile])/(poly[styrene‐b‐{ethylene‐co‐butylene}‐b‐styrene]) (SEBS) triblock copolymer and a varying concentration of the reactive (maleic anhydride)‐grafted SEBS were prepared by using a melt‐blending process. The effects of the material parameters (composition of ternary blends and SEBS/[{maleic anhydride}‐grafted SEBS] concentration ratio) and blending sequence on the morphological and mechanical properties of ternary blends were studied. Taguchi experimental design methodology was employed to design the experiments and select the material and processing parameters for the optimized mechanical properties. Tensile properties (Young's modulus and yield stress) and impact strength were considered as the response variables. It was demonstrated that there is a meaningful relationship between the composition of blends, processing parameters, observed phase structure, and obtained mechanical properties. The mechanical tests showed that the highest impact strength was achieved as the dispersion of the rubbery phase achieved an optimum size of about 1 μm. J. VINYL ADDIT. TECHNOL., 23:329–337, 2017. © 2015 Society of Plastics Engineers     

Chemical Functionalization of Graphene Oxide by Poly(styrene sulfonate) Using Atom Transfer Radical and Free Radical Polymerization: A Comparative Study

Poly(sodium styrenesulfonate)-functionalized graphene was prepared from graphene oxide, using atom transfer radical polymerization and free radical polymerization. In atom transfer radical polymerization route, the amine-functionalized GO was synthesized through hydroxyl group reaction of GO with 3-amino propyltriethoxysilane. Atom transfer radical polymerization initiator was grafted onto modified GO (GO-NH₂) by reaction of 2-bromo-2-methylpropionyl bromide with amine groups, then styrene sulfonate monomers were polymerized on the surface of GO sheets by in situ atom transfer radical polymerization. In free radical polymerization route, the poly(sodium 4-styrenesulfonate) chains were grafted on GO sheets in presence of Azobis-Isobutyronitrile as an initiator and styrene sulfonate monomer in water medium. The resulting modified GO was characterized using range of techniques. Thermal gravimetric analysis, scanning electron microscopy, transmission electron microscopy, and atomic force microscopy results indicated the successful graft of polymer chains on GO sheets. Thermogravimetric analysis showed that the amount of grafted polymer was 22.5 and 31?wt% in the free radical polymerization and atom transfer radical polymerization methods, respectively. The thickness of polymer grafted on GO sheets was 2.1?nm (free radical polymerization method) and 6?nm (atom transfer radical polymerization method) that was measured by atomic force microscopy analysis. X-ray diffractometer and transmission electron microscopy indicated that after grafting of poly(sodium 4-styrenesulfonate), the modified GO sheets still retained isolated and exfoliated, and also the dispersibility was enhanced.     

A new blend of polymeric encapsulation of azithromycin by spray-drying with a pH responsive in drug release

The microencapsulation of macrolides with polymers has been reported to retard the release of the drug in oral cavity. However, these methods are unable to control drug release in gastrointestinal tract. The aim of the present study was to investigate the effect of formulation of a new polymeric encapsulation of azithromycin which is suitable for both masking and sustained release usage. Eudragit E100 and polyethylene glycol (PEG) 4000 were chosen as the barrier coatings. The spray drying technique was used to obtain the microcapsules containing azithromycin. To obtain the initial results, the effects of several parameters were evaluated. A 3:2:1 ratio of E100:PEG 4000:azithromycin at pH 6 gave the best coating condition. Thermogravimetric analysis and IR analysis data confirmed the encapsulation of azithromycin inside polymers. The encapsulated drug was released in different rates from the particles by changing the pH (1.7 and 7.4). An analysis of the kinetic release properties indicates that the release of the drug is a combination of swelling and diffusion mechanism. The synergistic cooperation between polymers and drug due to the existence of several hydrogen bonding is supposed to influence the pH-responsive property of the encapsulated drug. Moreover, the use of mixtures of E100 and PEG 4000 appears to offer a good balance between cost and efficiency.     

One-step synthesized azo-dye modified Mg-Al LDH reinforced biobased semi-aromatic polyamide containing naphthalene ring; study on thermal stability and optical properties

A new series of polyamide Mg-Al layered double hydroxide (LDH) nanocomposites (PANC) were prepared using solution intercalation method. The biobased polyamide (PA) was synthesized using direct polycondensation reaction. Organo azo-dye modified Mg-Al LDH (OLDH) was prepared by one-step method and its effect on the thermal and optical properties of PA was investigated. The X-ray diffraction (XRD), field emission-scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM) results showed the uniform distribution of LDH sheets in the PA matrix. The UV-Vis spectra of PANC showed a blue shift as well as reduction in absorbance intensities and the photoluminescence studies revealed the higher emission intensities for PANC as compared to the neat PA. The results of thermogravimetric analysis (TGA) in both nitrogen and air atmospheres showed that the addition of OLDH up to 5 mass% was slightly improved thermal properties of PA.     

Genetic Polymorphisms in the APOA1 Gene and their Relationship with Serum HDL Cholesterol Levels

Low high density lipoprotein cholesterol (HDL-C) is a known risk factor of coronary artery disease. Apolipoprotein A1 (APOA1) is the most abundant component of HDL-C. This study aimed at identifying sequence variations (rare and common) in the APOA1 gene and its association with serum HDL-C levels. This study was conducted from April 2012 to February 2013 on 79 Tehranians (participants of Tehran Lipid and Glucose Study) with extremely low HDL-C (within the 5th percentile) and 63 individuals with extremely high HDL-C (within the 95th percentile) levels. After DNA amplification by PCR, DNA sequencing of all three exons and 700 bps of promoter region of the APOA1 gene was performed. Sequence results were analyzed and interpreted using the appropriate software and variants were identified. After sequencing 42 common and rare variants were identified, 11 of which were known variants and the others had been unreported so far. Of the exonic variants, 11 were missense, 6 were synonymous and 1 was nonsense. There was a significant association between serum HDL-C and variant of rs2070665 as well as variants Chr.11:116707788, Chr.11:116708059, Chr.11:116708036, Chr.11:116707729, rs201148448, Chr.11:116707018, Chr.11:116707801, Chr.11:116708530, Chr.11:116708088, rs121912724 and Chr.11:116706966 (p < 0.001). Variants Chr.11:116707018, rs121912724 and 2070665 were independent predictors of the HDL-C level (p < 0.001). SNP Chr.11:116707018 was the strongest predictor of the HDL-C level (OR 7.527, p < 0.001). This study identified 42 variants in APOA1 gene, 31 of which were new variants. Three variants of rs2070665, rs121912724 and Chr.11:116707018 could predict the HDL-C level independently. Variant rs2070665 was protective against low-HDL-C levels while variants rs121912724 and Chr.11:116707018 were risk factors for that in our population.     

Mangrove Oyster (Crassostrea belcheri) as a Biomonitor Species for Bioavailability of Polycyclic Aromatic Hydrocarbons (PAHs) from Sediment of the West Coast of Peninsular Malaysia

ABSTRACT

Rapid industrialization and urbanization in the west coast of Peninsular Malaysia has caused increasing pollution particularly of petroleum and petroleum by-products. Surface sediment and mangrove oyster (Crassostrea belcheri) were collected from five mangrove ecosystems in the west coast of Peninsular Malaysia and investigated for bioavailability of polycyclic aromatic hydrocarbons (PAHs). Sampling locations were selected from both remote areas with few or no previous records of petroleum pollution such as Pulau Merambong and polluted areas that are under international attention such as Klang mangrove ecosystem. PAH fractions were obtained through soxhlet extraction and two-step column chromatography and the fractions were injected to gas chromatography-mass spectrometry (GC-MS) for analysis. The concentrations of PAHs ranged from 151 to 4973 ng g^?1 dw in the sediments, while from 309 to 2225 ng g^?1 dw in the oysters. When tested for diagnostic ratios, a predominance of pyrogenic source PAHs was detected in the sediments, whereas PAHs in the oysters had mixed petrogenic and pyrogenic sources. A significant correlation (p < 0.05) was found between high molecular weight (HMW) PAHs in the sediments and oysters and biota accumulation factors (BAFs) of PAHs were approaching or exceeding unity indicating the ability of mangrove oyster in bioaccumulation of PAHs. Overall, this study indicates that mangrove oyster (C. belcheri) can be used as a biomonitor species for PAHs in an aquatic environment.     

MODELING OF MEMBRANE FOULING AND FLUX DECLINE IN MICROFILTRATION OF OILY WASTEWATER USING CERAMIC MEMBRANES

One of the major problems in pressure-driven membrane processes is reduction of flux far below the theoretical capacity of the membrane. The results of an experimental study of fouling mechanisms of ceramic membranes in separation of oil from synthesized oily wastewaters are presented. Mullite microfiltration (MF) membranes were synthesized from kaolin clay as MF ceramic membranes. The rejection of total organic carbon (TOC) for the synthetic feeds was found to be more than 94% by these membranes. Hermia's models were used to investigate the fouling mechanisms of membranes. The effect of pressure, cross flow velocity (CFV), temperature, oil concentration, and salt concentration on flux decline were investigated. The results showed that the cake filtration model can well predict the flux decline of mullite ceramic membranes; average error of this model is less than 7%. The results show that by increasing pressure from 0.5 to 4 bar, porosity of the cake layer on the mullite membranes decreases from 25.68% to 14.98%. After the cake filtration model, the intermediate pore blocking model was found to well predict the experimental data with an average error less than 10.5%.     

Study of Some Variables Affecting Particle Size and Particle Size Distribution of Suspension Polymerization of Methyl Methacrylate

A laboratory reactor was designed and constructed to study the effect of both speed of agitation and a concentration of suspension stabilizer on particle size and particle size distribution during the suspension polymerization of methyl methacrylate. It was concluded that the average particle size of the prepared polymer powder is directly proportional to the speed of agitation and is inversely proportional to the stabilizer concentration. New empirical equations correlating the average particle size and the particle size distribution (PSD) were derived from the study.