Modeling of microstrip antennas using neural networks techniques: A review

Artificial neural networks modeling have recently acquired enormous importance in microwave community especially in analyzing and synthesizing of microstrip antennas (MSAs) due to their generalization and adaptability features. A trained neural model estimates response very fast, which is nearly equal to its measured and/or simulated counterpart. Thus, it completely bypasses the repetitive use of conventional models as these models need rediscretization for every minor changes in the geometry, which itself is a time‐consuming exercise. The purpose of this article is to review this emerging area comprehensively for both analyzing and synthesizing of the MSAs. During reviewing process, some untouched cases are also observed, which are essentially required to be resolved for antenna designers. Unique and efficient neural networks‐based solutions are suggested for these cases. The proposed neural approaches are validated by fabricating and characterizing of the prototypes too. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:747–757, 2015.     

Delay-dependent anti-windup synthesis for stability of constrained state delay systems using pole-constraints

This paper proposes the design of anti-windup compensator gain for stability of actuator input constrained state delay systems using constrained pole-position of the closed-loop. Based on Delay-Dependent Lyapunov-Krasovskii functionals and local sector conditions, a new LMI characterization is derived that ensures closed-loop asymptotic stability of constrained state delay systems while accounting upper bound fixed state delay and largest lower bound of the system’s pole-position in the formulation of anti-windup gain. Besides, at saturation, the method significantly nullifies the inherent slow dynamics present in the system. It is shown in the comparative numerical examples that the LMI formulation draws stability with improved time-domain performance.     

Behavioral Attestation for Web Services using access policies

Service Oriented Architecture with underlying technologies like web services and web service orchestration opens new vistas for integration among business processes operating in heterogeneous environments. However, such dynamic collaborations require a highly secure environment at each respective business partner site. Existing web services standards address the issue of security only on the service provider platform. The partner platforms to which sensitive information is released have till now been neglected. Remote Attestation is a relatively new field of research which enables an authorized party to verify that a trusted environment actually exists on a partner platform. To incorporate this novel concept in to the web services realm, a new mechanism called WS-Attestation has been proposed. This mechanism provides a structural paradigm upon which more fine-grained solutions can be built. In this paper, we present a novel framework, Behavioral Attestation for Web Services, in which XACML is built on top of WS-Attestation in order to enable more flexible remote attestation at the web services level. We propose a new type of XACML policy called XACML behavior policy, which defines the expected behavior of a partner platform. Existing web service standards are used to incorporate remote attestation at the web services level and a prototype is presented, which implements XACML behavior policy using low-level attestation techniques.     

Wavelet based sub-band parameters for classification of unaspirated Hindi stop consonants in initial position of CV syllables

This paper proposes a new feature extraction technique using wavelet based sub-band parameters (WBSP) for classification of unaspirated Hindi stop consonants. The extracted acoustic parameters show marked deviation from the values reported for English and other languages, Hindi having distinguishing manner based features. Since acoustic parameters are difficult to be extracted automatically for speech recognition. Mel Frequency Cepstral Coefficient (MFCC) based features are usually used. MFCC are based on short time Fourier transform (STFT) which assumes the speech signal to be stationary over a short period. This assumption is specifically violated in case of stop consonants. In WBSP, from acoustic study, the features derived from CV syllables have different weighting factors with the middle segment having the maximum. The wavelet transform has been applied to splitting of signal into 8 sub-bands of different bandwidths and the variation of energy in different sub-bands is also taken into account. WBSP gives improved classification scores. The number of filters used (8) for feature extraction in WBSP is less compared to the number (24) used for MFCC. Its classification performance has been compared with four other techniques using linear classifier. Further, Principal components analysis (PCA) has also been applied to reduce dimensionality.     

Your comments matter: incorporating viewers’ comments for ranking online video content using bibliometrics

ABSTRACT

The quality of user-generated content over World Wide Web media is a matter of serious concern for both creators and users. To measure the quality of content, webometric techniques are commonly used. In recent times, bibliometric techniques have been introduced to good effect for evaluation of the quality of user-generated content, which were originally used for scholarly data. However, the application of bibliometric techniques to evaluate the quality of YouTube content is limited to h-index and g-index considering only views. This paper advocates for and demonstrates the adaptation of existing Bibliometric indices including h-index, g-index and M-index exploiting both views and comments and proposes three indices h_vc, g_vc and m_vc for YouTube video channel ranking. The empirical results prove that the proposed indices using views along with the comments outperform the existing approaches on a real-world dataset of YouTube.     

Wear and surface analysis of 38 mm ceramic-on-metal total hip replacements under standard and severe wear testing conditions

The purpose of this study was to compare the wear of zirconia-toughened alumina (ZTA) and alumina femoral heads tested against as-cast CoCrMo alloy acetabular cups under both standard and severe wear conditions. A new severe test, which included medio-lateral displacement of the head and rim impact upon relocation, was developed. This resulted in an area of metal transfer and an area of increased wear on the superior-anterior segment of the head that were thought to be due to dislocation and rim impact respectively. While the wear of all ceramic heads was immeasurable using the gravimetric method, the wear rates for the metallic cups from each test were readily calculated. An average steady state wear rate of 0.023 +/- 0.005 mm3/10(6) cycles was found for the cups articulating against ZTA under standard wear conditions. A similar result had previously been obtained for the wear of cups articulated against alumina heads of the same size (within the same laboratory). Under severe wear conditions an increase in the metallic cup steady state wear rate was found with the ZTA and alumina tests giving 0.623 +/- 0.252 and 1.35 +/- 0.154 mm3/10(6) cycles respectively. Wear of the ceramic heads was detected using atomic force microscopy which showed, under severe wear conditions, a decrease in polishing marks and occasional grain removal. The surfaces of the ZTA heads tested under standard conditions were virtually unchanged from the unworn samples. Friction tests showed low friction factors for all components, pre and post wear.     

Three-qubit Grover’s algorithm using superconducting quantum interference devices in cavity-QED

We present a scheme for the implementation of three-qubit Grover’s algorithm using four-level superconducting quantum interference devices (SQUIDs) coupled to a superconducting resonator. The scheme is based on resonant, off-resonant interaction of the cavity field with SQUIDs and application of classical microwave pulses. We show that adjustment of SQUID level spacings during the gate operations, adiabatic passage, and second-order detuning are not required that leads to faster implementation. We also show that the marked state can be searched with high fidelity even in the presence of unwanted off-resonant interactions, level decay, and cavity dissipation.     

A supply network-modelling system for a small- to medium-sized manufacturing company

During the late 1990s and early 2000s, the profile of global manufacturing has experienced many changes. There is anecdotal evidence that many western manufacturing companies have chosen to expand their manufacturing base across geographical boundaries. The common reasons sited for these ventures are to exploit less expensive labour markets, to establish a presence in expanding markets and in response to the threat of new competition. Whilst a global manufacturing base can prove to have many cost and sales benefits, there are also many disadvantages. Logistics operations can often increase in complexity leading to higher reliance on planning and effective interpretation of demand data. In response, systems modelling has remerged as a fertile research area after many years. Many modelling and simulation techniques have been developed, but these have had very limited practical success. The authors have identified that majority of these simulation techniques rely upon a detailed market structure being known, when this is rarely the case. This paper describes the outcome of a research project to develop of a pragmatic set of tools to gather, assess and verify supply chain structure data. A hybrid collection of technologies are utilised to assist these operations and to build a dynamic supply network model.     

Modelling of the filling of micro-cavities of finite geometry by amorphous polymers using hot-embossing

The possibility to fill cavities of finite geometry could be described using an analytical model of the hot-embossing process of viscoelastic polymers. This model is based on the volume conservation during the forming process which allows to predict data concerning the geometrical evolution of the material on one hand, and on the other hand the filling time of cavities in the mould. A particular attention was drawn on the necessary time to fill the cavities depending on their shape or a scale factor for a given cavity shape.