New nanocomposite materials based on polymerization of [oligo(oxyethylene) methacrylates] in the presence of montmorillonite clay

Intercalation of poly[oligo(oxyethylene) methacrylates] onto sodium montmorillonite (MMT) clay has been investigated. A polymer–clay hybrid has been synthesized through intercalation of the monomer followed by its solution free‐radical polymerization. Eight polymer–clay hybrids were prepared using different weight ratios of clay, different oligo(oxyethylene) lengths and different proportions of crosslinker. Evidence of the development of nanostructures is obtained from scanning electron microscopy, and wide‐angle X‐ray diffraction studies support these results which show disappearance of the peak characteristic to d₀₀₁ spacing. In this hybrid MMT is dispersed homogeneously in the polymer matrix. © 2003 Society of Chemical Industry     

Vibration and damping analysis of beams with composite coats

Numerical and experimental investigations of the dynamic behavior for coated laminate composite beams has been presented and discussed in the present work. A numerical technique is utilized to compute the eigen parameters of coated laminated composite beams. An attempt to study the variations in the natural frequencies and damping properties of laminated composite coated beams taking into account different lamina orientation of coat and various kinds of core isotropic material (steel and aluminium) is introduced. The variations of the eigen parameters vs. the code number of the coated layer with the use of various types of isotropic material are measured by utilizing (the frequency response displayed on) an (FFT) analyzer. The experimental and numerical work is carried out on four different fiber orientations, aligned longitudinally, transversely, making 45 ° with the fibers direction and randomly oriented. Comparison between experimental and numerical results shows a tight connection between them.     

Sintering of an ultra pure α-alumina powder: I. Densification,grain growth and sintering path

Sintering in air of an ultra pure α-alumina powder has been investigated. Isothermal experiments have been conducted on green samples shaped by slip casting. The grain growth and densification kinetics have been established. The “relative density/grain size” trajectory, called “sintering path”, has been drawn. Hypotheses concerning the mechanisms controlling grain growth and densification have been formulated. For the first time, it is shown that grain growth and densification kinetics exhibit two distinct regimes, where an initial point defect formation step plays a key role. When point defects have been generated, the diffusion of the associated Al³⁺ cations controls grain growth and densification.     

Preface

Multibody System Dynamics -     

Radiation polymerization of acrylonitrile in a viscous system with styrene

Radiation polymerization of acrylonitrile in a viscous system with styrene was performed at ambient temperature by using γ‐rays. It is found that the overall rate of polymerization was accelerated after critical conversion due to the gel effect. As the molar fraction of styrene in monomer feed (f_St) is increased, both the total polymer conversion and molar fraction of acrylonitrile in the copolymer feed (F_AN) were decreased. The monomer reactivity ratios for acrylonitrile and styerne were determined to be r₁ (AN) = 0.25 and r₂ (St) = 2.0, respectively. The copolymers obtained were characterized by Fourier transformed infrared spectra (FTIR), X‐ray diffraction (XRD), scanning electron microscopy (SEM), ¹H‐NMR, and pyrolysis mass spectrometry (PMS). It was found that the slight addition of styrene to acrylonitrile strongly changes crystallinity, morphology, and thermal decomposition of the resulting polymer. ¹H‐NMR measurment of AN/St copolymer showed the appearance of aromatic proton signals and shifted the resonance of the methylene proton to lower chemical shifts. The mass spectra of AN/St copolymers showed fragments of pyrolysates corresponding to oligonitriles with styrene end groups. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 268–275, 2002; DOI 10.1002/app.10324     

Low-temperature unit-cell parameters of La1−x Pr x CaBaCu3O7 compounds

The suppression of the superconductivity by praseodymium in La_1−x Pr _x CaBaCu₃O₇ may be explained in terms of the difference in the electronic or crystal structure between these compounds. Three compositions with x=0.0, 0.5, 1.0 were, therefore, investigated by X-ray diffraction in order to determine the unit-cell dimensions at room temperature as well as at lower temperatures down to 5 K. The results showed no considerable changes in the orthorhombic unit-cell dimensions on decreasing the temperature to 5 K. Unit-cell volumes at low temperatures were 0.99 of the room temperature values. The intensity sequence of reflections in the diffraction pattern was the same for all samples throughout the range of temperature studied.     

MC-CDMA with exponential power profile in Nakagami fading channel

A refined study of multi-carrier code division multiple access transmission over a Nakagami fading channel is proposed. The channel power is modeled with an exponential power profile rather than the uniform profile prevalent in other papers. An expression for the bit error rate (BER) is then derived. Numerical results show that MC-CDMA performances depend on the power dispersion of interferers around the desired user power.     

Simultaneous Spark Plasma Synthesis and Densification of TiC–TiB2 Composites

The simultaneous synthesis and densification of dense TiC–TiB₂ composite has been investigated starting from Ti, B₄C, and C as reactants, and using the spark plasma sintering (SPS) technique. The optimal conditions for complete conversion of the reactants to the composite were determined for different applied DC current levels. A kinetic investigation performed allows us to conclude that solid-state diffusion is the mechanism governing the synthesis process. It is seen that TiC is the first phase formed, while TiB₂ formation occurs afterward. Two intermediate boride phases, i.e. TiB and Ti₃B₄, are also formed but, as the SPS holding time was augmented, they were gradually and completely converted to TiB₂. Moreover, it is found that in order to reach relatively high dense products, an electric current needs to be applied for time intervals longer than those required for obtaining complete conversion. A pure dense product (relative density ∼98%) was obtained when an electric pulsed current of 1100 A and a mechanical pressure of 20 MPa were applied for about 4 min.     

New mechanisms in photo-assisted MOVPE of II-VI semiconductors

The first detailed comparison has been made of the metalorganic vapor phase epitaxy growth rates of CdTe, ZnTe, and ZnSe, measured in situ with laser reflectometry. The comparison also includes the photo-assisted growth with visible radiation from an argon ion laser. Using a standard Group II precursor (DMCd or DMZn.TEN) partial pressure of 1.5 × 10⁻⁴ atm, VI/II ratio of 1 and DIPM (M = Te, Se) the maximum growth rates are in the region of 10 to 15 AU/ s. Decrease in growth rates of ZnTe at higher temperatures or higher laser powers have been attributed to the desorption from the substrate of unreacted Te precursor. The behavior of DTBSe is quite different from DIPSe for both pyrolytic and photo-assisted growth. The maximum growth rate is around 1 AU/ s with very little photo-enhancement, except at 300°C. Secondary ion mass spectroscopy analysis of hydrogen concentration in the ZnSe layers shows high concentrations, up to 5.9 × 10¹⁹ atoms cm⁻³ for DTBSe grown ZnSe under pyrolytic conditions. These results show that the growth kinetics play an important part in the incorporation of hydrogen and passivation of acceptor doped material.