A survey of tools and methods used by certified professional ergonomists

A survey of Certified Professional Ergonomists (CPEs) was conducted to gather information on the types of basic tools, direct and observational measurement techniques, and software used by practitioners. The motivation for the survey was to better understand what types of tools and methods practitioners use, their opinions of these tools, and to potentially gain an understanding of the constraints or preferences that influence this selection. Reasons for using or not using a selection of tools were also surveyed. Of 578 surveys that were delivered to CPEs and Associate Ergonomics Professionals, 308 were returned for a response rate of 53%. The respondents tended to be biased towards physical ergonomics, as the survey primarily focused on this area of ergonomics. A high percentage of respondents reported using tape measures, video cameras, stopwatches and digital cameras. The most commonly used observational methods were those involving manual materials handling, whereas the most commonly used direct measurement tools were pinch and grip dynamometers and push/pull gauges. The frequency and type of checklists, software, and anthropometric data used are summarized.     

Enhancement of hematite bioreduction by natural organic matter

The effects of natural organic matter (NOM), ferrozine, and AQDS (anthraquinone-2,6-disulfonate) on the reduction of hematite (alpha-Fe2O3) by Shewanella putrefaciens CN32 were studied. It has been proposed that NOM enhances the reduction of Fe(III) by means of electron shuttling or by Fe(II) complexation. Previously both mechanisms were studied separately using "functional analogues" (AQDS for electron shuttling and ferrozine for complexation) and are presently compared with seven different NOMs. AQDS enhanced hematite reduction within the first 24 h of incubation, and this had been ascribed to electron shuttling. Most of the NOMs enhanced hematite reduction after 1 day of incubation indicating that these materials could also serve as electron shuttles. The effect of ferrozine was linear with concentration, and all of the NOMs exhibited this behavior. Fe(II) complexation only enhanced hematite reduction after sufficient Fe(II) had accumulated in the system. Fe(II) complexation appeared to alleviate a suppression of the hematite reduction rate caused by accumulation of Fe(II) in the system. Addition of Fe(II) to the hematite suspension, prior to inoculation with CN32, significantly inhibited hematite reduction and greatly diminished the effects of all of the organic materials, although some enhancement was observed due to addition of anthroquinone-2,6-disulfonate. These results demonstrate that NOM can enhance iron reduction by electron shuttling and by complexation mechanisms.     

Electricity generation from synthetic acid-mine drainage (AMD) water using fuel cell technologies

Acid-mine drainage (AMD) is difficult and costly to treat. We investigated a new approach to AMD treatment using fuel cell technologies to generate electricity while removing iron from the water. Utilizing a recently developed microbial fuel cell architecture, we developed an acid-mine drainage fuel cell (AMD-FC) capable of abiotic electricity generation. The AMD-FC operated in fed-batch mode generated a maximum power density of 290 mW/m2 at a Coulombic efficiency greater than 97%. Ferrous iron was completely removed through oxidation to insoluble Fe(III), forming a precipitate in the bottom of the anode chamber and on the anode electrode. Several factors were examined to determine their effect on operation, including pH, ferrous iron concentration, and solution chemistry. Optimum conditions were a pH of 6.3 and a ferrous iron concentration above approximately 0.0036 M. These results suggest that fuel cell technologies can be used not only for treating AMD through removal of metals from solution, but also for producing useful products such as electricity and recoverable metals. Advances being made in wastewater fuel cells will enable more efficient power generation and systems suitable for scale-up.     

Chemical reduction of U(VI) by Fe(II) at the solid-water interface using natural and synthetic Fe(III) oxides

Abiotic reduction of 0.1 mM U(VI) by Fe(II) in the presence of synthetic iron oxides (biogenic magnetite, goethite, and hematite) and natural Fe(III) oxide-containing solids was investigated in pH 6.8 artificial groundwater containing 10 mM NaHCO3. In most experiments, more than 95% of added U(VI) was sorbed to solids. U(VI) was rapidly and extensively (> or = 80%) reduced in the presence of synthetic Fe(III) oxides and highly Fe(II) oxide-enriched (18-35 wt % Fe) Atlantic coastal plain sediments. In contrast, long-term (20-60 d) U(VI) reduction was less than 30% in suspensions of six other natural solids with relatively low Fe(III) oxide content (1-5 wt % Fe). Fe(II) sorption site density was severalfold lower on these natural solids (0.2-1.1 Fe(II) nm(-2)) compared tothe synthetic Fe(lII) oxides (1.6-3.2 Fe(II) nm(-2)), which may explain the poor U(VI) reduction in the natural solid-containing systems. Addition of the reduced form of the electron shuttling compound anthrahydroquinone-2,6-disulfonate (AH2DS; final concentration 2.5 mM) to the natural solid suspensions enhanced the rate and extent of U(VI) reduction, suggesting that AH2DS reduced U(VI) at surface sites where reaction of U(VI) with sorbed Fe(II) was limited. This study demonstrates that abiotic, Fe(II)-driven U(VI) reduction is likely to be less efficient in natural soils and sediments than would be inferred from studies with synthetic Fe(III) oxides.     

Cardiac and behavioral responses to repeated tactile and auditory stimulation by preterm and term neonates.

Auditory stimuli (a buzzer and rattle) and a tactile stimulus (a plastic filament) were repeatedly presented to 18 term and 18 preterm infants. Both groups initially responded to all stimuli with increased limb movements and heart rate acceleration. However, only the term infants responded to stimulus repetition by decreasing both cardiac and behavioral responses. In addition, they differentially responded to the 3 stimuli and showed response recovery in both systems. Since a behavioral response decrement was observed without a cardiac response decrement in the preterm group, a 2nd experiment was conducted. Heart rate change during the sucking activity of Exp II revealed an integration between autonomic and motor responsivity of preterm infants comparable to that of term newborns. The lack of cardiac–behavioral response integration during Exp I is discussed in the context of state differences between preterm and term infants as well as potential immaturity or some insult experienced by the preterm infants. The stimulus discrimination and habituation demands of Exp I may have overtaxed the preterm infants' ability to maintain response integration. (23 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

On the evolution of task-based analysis of manual materials handling, and its applicability in contemporary ergonomics

The industrial revolution significantly changed the way work was organized and analyzed by the introduction and widespread implementation of the division of labor philosophy. This philosophy has continued to dominate work design, and has evolved beyond the factory to include many facets of service industries, and even professional occupations. The analysis of manual work, particularly materials handling tasks, remains an active domain of ergonomics research and practice. Many of the task-analytic tools used for workplace analysis are rooted in the philosophy of dividing work into elements, analyzing the individual elements, and synthesizing the results into conclusions about the entire job, including the risk of contracting musculoskeletal disorders (MSDs). The authors discuss the notion that the nature of modern work, which is characterized by multiple tasks in a complex time pattern, and the complex nature of MSDs, which are influenced by biomechanical as well as psychological, political, and economic factors, may limit the effectiveness of classical task analytic techniques in preventing MSDs.     

Cross-sectional investigation of task demands and musculoskeletal discomfort among restaurant wait staff

A cross-sectional study of task demands and musculoskeletal discomfort among a sample of 100 wait staff in ten casual dining restaurants was conducted. In addition to answering a questionnaire about musculoskeletal discomfort and symptoms experienced in the past 12 months and attributed to work, subjects were asked about various aspects of their jobs, such as shift length, number of shifts per week and safety training. The managers of the restaurants were also interviewed to gather basic information on factors such as work hours, alternative duty availability and safety practices. When asked to rank the three most important causes of injuries, the responses of both managers and wait staff were congruent with Bureau of Labor Statistics (USA) data for 1999 on the nature of injuries and attributed exposures, with slips and falls, musculoskeletal disorders and acute injuries (e.g. burns, cuts) highlighted. Of the 100 subjects, 42% reported experiencing musculoskeletal symptoms in the past year, with the lower back area (18%) and shoulder (11%) with the most frequent symptoms reported in the responses. Although many of the materials handling tasks were not excessive, the heavier tray lifts and carries are a cause for concern. There are also slip and fall issues that influence the risks of these tasks. Future research needs, including addressing the mismatch between more common materials handling assessment tools and the nature of food serving tasks, are discussed.     

Micropatterning of Electrospun Polyurethane Fibers Through Control of Surface Topography

A novel technique was developed to control the deposition of electrospun polyurethane fibers using a silicone collector substrate patterned with soft lithography. This method can be used to control selective fiber deposition with broad pattern dimensions (50–500 µm) over a large area. The combination of ease of use, low cost, tunability, and generation of relatively large fiber mats available with this technique is expected to advance our ability to mimic the orientation and anisotropic properties of native tissues to generate improved tissue engineering scaffolds.

     

Single electron spintronics

Single electron electronics is now well developed, and allows the manipulation of electrons one-by-one as they tunnel on and off a nanoscale conducting island. In the past decade or so, there have been concerted efforts in several laboratories to construct single electron devices incorporating ferromagnetic components in order to introduce spin functionality. The use of ferromagnetic electrodes with a non-magnetic island can lead to spin accumulation on the island. On the other hand, making the dot also ferromagnetic introduces new physics such as tunnelling magnetoresistance enhancement in the cotunnelling regime and manifestations of the Kondo effect. Such nanoscale islands are also found to have long spin lifetimes. Conventional spintronics makes use of the average spin-polarization of a large ensemble of electrons: this new approach offers the prospect of accessing the quantum properties of the electron, and is a candidate approach to the construction of solid-state spin-based qubits.