基于USB接口的弹载数据测试存储装置的研究

本文介绍了一种基于USB接口的弹载数据测试存储装置的设计方案.借助于自带电池的大容量RAM,高速并行AD器件,在AVR单片机的控制下完成数据的采集、存储,最终通过USB接口电路联接到PC并高速读出数据.本方案的优点是在系统电源耗尽的情况下仍可保存数据并通过USB接口供电从而读出数据.     

浅谈水泥基渗透结晶型防水材料

文章论述了水泥基渗透结晶型防水材料的防水机理以及应用,并对国家标准部分检测项目进行了说明。     

提高开卷线纵剪机精度的研究

通过对纵剪机右立柱轴承间隙测量方法和左立柱导向结构的改进，保证了加工精度，易于操作，提高了生产效率。     

土石坝裂缝系列讲座之三湖北省白莲河水库土石坝裂缝原因及加固

1工程概况 白莲河水库位于长江中游支流稀水河上，控制流域面积1800km^2，总库容12．5亿m^3，是一座以灌溉、发电为主兼顾防洪、航运和养殖的综合利用水库。大坝为粘土心墙风化砂壳坝，最大坝高55m，坝顶高程111．05m，坝顶长259m，坝顶宽8m，上游边坡1：1．77～1：3．5，下游边坡1：1．66～1：2.5。心墙顶高程110．5m，顶宽0．6m，底宽16．0m。水库设计标准按1000年一遇洪水设计，可能最大洪水校核。     

Level set and geodesic active contours based measurement of material removal between serial sections

The measurement of the thickness of material removed between serial sections is a crucial step of three-dimension reconstruction. Geodesic active contours is an efficient method for contour detection of objects on an image. The indents on the SiC/Al composite micrographs are segmented by using level set and geodesic active contours. After getting the contours of the indents, we calculate the distance from the uppermost pixel to the lowermost pixel to get the vertical diagonal length, and calculate the distance from the leftmost pixel to the rightmost pixel to get the horizontal diagonal length of each contour. Then the final length of each diagonal is acquired by averaging the vertical diagonal length and the horizontal diagonal length, respectively. The Vickers’ indenter is made by a square pyramidal-shaped diamond with opposite faces at an angle of 136°, so the thickness of material removed between two serial sections and the length difference of the diagonals on the two serial sections has a definite geometrical relation. Thus the thickness of material removed between two serial sections is acquired using the geometrical relation.     

Simulating Experiment for Temperature Field of Frozen Subgrade Using Regulation Tubes

The main factors that influence the temperature field of frozen subgrade were analyzed.The experimental equipment for simulating frozen subgrade was built up,and the declining regulating tubes were placed at the foot of the embankment. By means of this equipment two simulating experiments of controlling temperature filed of frozen subgrade were carried out in the laboratory. One method is to collect natural cold energy, and the other one is to collect natural cold energy ccompanied by artificial refrigeration simultaneously. The result indicates that the latter is an effective method for maintaining the stability of the frozen subgrade.     

贝利阀在氨厂运行情况简介

介绍贝利阀在试车及试生产期间出现的问题及解决办法，指出维护过程中应注意的事项。     

低频天波传播预测与低电离层模式参数的测定

在理想化的均匀球面通过进一步地与具有突变边界的均匀各向同性同心球面电离层条件下的LF天波全波解的基础上，考虑由海陆之差引起的地面导电率的变化、大气和低电离层的不均匀性以及由地磁场引起的各向异性特性等因素的影响，推导出了较严格预测实际地与低电离层条件下场强与传播相延精确预测的完善公式。 给出了一些低电离层模式参数的实测结果。这些模式参数为参考高度h0、参考浓度N0与梯度参数α。由罗兰－C天波信号场强与相位的精细测量数据求得的。     

188Re-HEDP注射液药物代谢动力学研究

将药物静脉注射到动物体内 ,以观察188Re -HEDP注射液在动物体内代谢动力学的特征。结果表明 ,滞留在荷瘤大鼠患骨中的放射性比在正常骨中的多 (P <0 .0 5 ) ;小鼠 72h内排泄放射性累积百分率约为 82 %(其中尿液排泄为 80 %) ;体外血浆蛋白结合率为 86 .4 %± 0 .30 %。说明该药物是亲骨药物 ,血清除快符合药物代谢动力学二室模型 ,大部分的药物以原形从肾排出。     

HTR-10燃料元件装卸系统冷态调试

10MW高温气冷实验堆（HTR－10）是一座球床堆，由燃料元件装卸系统实现燃料元件的装卸和循环，且不需要停堆，为保证HTR－10的正常运行，燃料元件装卸系统必须安全，可靠，为此，必须对燃料元件装卸系统进行周密，细致的调试试验和验证，本文介绍了燃料元件装卸系统冷调试的主要调试项目，调试方法和调试结果。