Apron design for protecting double‐skin façade fires

Although double‐skin façade (DSF) is an environmental‐friendly architectural feature, its fire behaviour is a deep concern. The interior glass system including the glass pane, metal frame and associated accessories will be hotter than the exterior glass system as demonstrated by earlier studies. The glass pane above the fire room will be broken to spread flame into the upper compartment. Aprons are proposed to protect the air cavity of DSF in a way similar to those outside a single‐skin façade. In this paper, the effect of aprons in protecting against fire spread from an underlying compartment to the compartments above by preventing glass breakage of the inner glass pane was studied. Fire and smoke from a post‐flashover room fire adjacent to the DSF would be trapped in the air cavity between the two glass panes. Spreading of hot gases with different apron widths was studied by numerical simulations with CFD first. Fire environment with and without breaking the apron immediately above the fire room was studied. Full‐scale burning tests on part of an experimental DSF rig were then carried out to demonstrate the performance of horizontal apron in the DSF rig of 6 m tall and air cavity depth of 2 m with different apron widths. All demonstrated that providing apron is appropriate in protecting DSF fires. Copyright © 2014 John Wiley & Sons, Ltd.     

Effects of particulate matter on inflammatory markers in the general adult population

Background

Particulate air pollution is associated with increased risk of cardiovascular disease and stroke. Although the precise mechanisms underlying this association are still unclear, the induction of systemic inflammation following particle inhalation represents a plausible mechanistic pathway.

Methods

We used baseline data from the CoLaus Study including 6183 adult participants residing in Lausanne, Switzerland. We analyzed the association of short-term exposure to PM₁₀ (on the day of examination visit) with continuous circulating serum levels of high-sensitive C-reactive protein (hs-CRP), interleukin 1-beta (IL-1??), interleukin 6 (IL-6), and tumor-necrosis-factor alpha (TNF-??) by robust linear regressions, controlling for potential confounding factors and assessing effect modification.

Results

In adjusted analyses, for every 10???g/m³ elevation in PM₁₀, IL-1? increased by 0.034 (95?% confidence interval, 0.007-0.060) pg/mL, IL-6 by 0.036 (0.015-0.057) pg/mL, and TNF-?? by 0.024 (0.013-0.035) pg/mL, whereas no significant association was found with hs-CRP levels.

Conclusions

Short-term exposure to PM₁₀ was positively associated with higher levels of circulating IL-1?, IL-6 and TNF-?? in the adult general population. This positive association suggests a link between air pollution and cardiovascular risk, although further studies are needed to clarify the mechanistic pathway linking PM₁₀ to cardiovascular risk.     

Asymmetric Dimethylarginine Plasma Levels and Endothelial Function in Newly Diagnosed Type 2 Diabetic Patients

It is now well established that major risk factors for cardiovascular diseases (CVD) impact upon endothelial function by decreasing nitric oxide (NO) bioavailability. Asymmetric dimethylarginine (ADMA), an endogenous analog of l-arginine, is able to inhibit the activity of endothelial-NO synthase, promoting endothelial dysfunction. Type 2 diabetes (T2D) is characterized by a reduced endothelium-dependent vasodilation and increased ADMA levels and ADMA is strongly associated with micro- and macrovascular diabetic complications. However, there are not a lot of data about the role of ADMA on endothelial function in newly diagnosed T2D patients without cardiovascular (CV) complications. For this aim, we have enrolled forty-five newly diagnosed T2D patients, evaluated by a oral glucose tolerance test, and thirty normal subjects. Endothelium-dependent and -independent vasodilatation was investigated by intra-arterial infusion of increasing doses of acetylcholine (ACh) and sodium nitroprusside. ADMA was measured by high-performance liquid chromatography and insulin resistance (IR) by HOMA. Newly diagnosed T2D patients showed higher ADMA and l-arginine mean values in comparison with normal subjects and a significantly reduced ACh-stimulated forearm blood flow (FBF). In T2D patients FBF was significantly and inversely correlated with ADMA (r = −0.524, p < 0.0001) and in a multivariate regression analysis, ADMA resulted the stronger predictor of FBF, explaining the 27.5% of variability (p < 0.0001). In conclusion, ADMA was strongly related to endothelial dysfunction also in patients with newly diagnosed T2D, without clinically manifest vascular complications. This field is of great interest for understanding the mechanisms underlying the pathogenesis of diabetic disease and its CV complications.     

Does carbon nanopowder threaten amphibian development?

Lethal and teratogenic potentials of carbon nanoparticles (CNPs) in their amorphous form were investigated by the standardized Frog Embryo Teratogenesis Assay-Xenopus (FETAX), a 96-h in vitro whole-embryo toxicity test based on the amphibian Xenopus laevis. Embryos were acutely exposed to 1, 10, 100 and 500 mg/L CNP suspensions and evaluated for lethality, malformations and growth inhibition. Larvae were processed for histological and ultrastructural analyses to detect the main affected organs, to look for specific lesions at the subcellular level and to image and track CNPs into tissues. Only the highest CNP suspension resulted in being embryolethal for X. laevis larvae, while malformed larva percentages significantly differed from controls starting from 100 mg/L. The stomach and gut were the preferential CNP accumulation sites, on the contrary, the digestive epithelium remained intact. The analyses showed the presence of isolated nanoparticles and/or aggregates in different secondary target organs. CNPs were found in circulating erythrocytes. The research confirms the good tolerance of X. laevis towards pure elemental carbon in its nanoparticulate amorphous form, but highlights the possibility of CNP transfer toward all body areas.     

Tributyl citrate oligomers as plasticizers for poly (lactic acid): thermo-mechanical film properties and aging

Poly (lactic acid), PLA, is a biodegradable thermoplastic that can be produced from renewable resources. The polymer is of interest for production of films for packaging applications. However, plasticization of PLA is required in order to obtain films with sufficient flexibility. PLA was blended with tributyl citrate (TbC) and two oligomers of TbC that were synthesized by transesterification of tributyl citrate (TbC) and diethylene glycol (DEG). Dynamic mechanical analysis (DMA) and differential scanning calorimetry (DSC) were used to investigate the dynamic mechanical and thermal properties of the blends. All the plasticizers investigated decreased the glass transition temperature of PLA, and the reduction was the largest with the plasticizer having the lowest molecular weight. The PLA matrix became saturated with plasticizer at a certain concentration and phase separation occurred; the higher the molecular weight of the plasticizer, the lower the saturation concentration. Aging of the blends at room temperature for several months induced partial phase separation in the material. It was observed that the morphological stability of the blends was enhanced when the plasticizer concentration was reasonably low, i.e. 10-15 wt%.     

Melting behavior and crystallization kinetics of poly(butylene terephthalate‐co‐diethylene terephthalate) and poly(butylene terephthalate‐co‐triethylene terephthalate) copolyesters

The melting behavior of poly(butylene terephthalate‐co‐diethylene terephthalate) and poly(butylene terephthalate‐co‐triethylene terephthalate) copolymers was investigated by differential scanning calorimetry after isothermal crystallization from the melt. Multiple endotherms were found for all the samples, and attributed to the melting and recrystallization processes. By applying the Hoffman‐Weeks' method, the equilibrium melting temperatures of the copolymers under investigation were obtained. Two distinct peaks in the crystallization exothermic curve were observed for all the samples. Both of them appeared at higher times than that of PBT, indicating that the introduction of a comonomer decreased the crystallization rate. The observed dependence of this latter on composition was explained on the basis of the content of ether–oxygen atoms in diethylene and triethylene terephthalate units, and of the different sizes of these units. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 3545–3551, 2001     

Extraction of polymer stress–strain behavior in the presence of self‐heating by the use of a simple model for the elastic–plastic deformation

Polymer materials are well known to be sensitive to strain rate and temperature. Self‐heating and friction effects also play an important role in the mechanical response of these materials. Numerous constitutive laws and phenomenological models have been developed to take into account these dependencies. This article proposes a simplified phenomenological model based on a mapping technique for the strain rate and temperature dependence. The effects of friction and adiabatic heating are also analyzed in this work. Relatively good results are obtained compared to experimental results for polypropylene and polychlorotrifluoroethylene. A parametric investigation of the effects of the interfacial equivalent stress (between the specimen and the compressive bars) and the fraction of plastic work converted into heat was performed. This parametric study allowed for a good approximation of these two parameters for the two studied polymers. POLYM. ENG. SCI., 55:2474–2481, 2015. © 2015 Society of Plastics Engineers     

Microwave-assisted synthesis of isosorbide-derived diols for the preparation of thermally stable thermoplastic polyurethane

In order to prepare thermally stable isosorbide-derived thermoplastic polyurethane, the synthesis of two new chiral exo–exo configured diols, prepared from isosorbide, and two types of diphenols (bisphenol A and thiodiphenol) was described. The synthesis conditions were optimized under conventional heating and microwave irradiations. To prove their suitability in polymerization, these monomers were successfully polymerized using 4,4′-diphenylmethane diisocyanate (MDI) and hexamethylene diisocyanate (HDI). Both monomers and polymers have been studied by NMR, FT-IR, TGA, DSC; intrinsic viscosity of polymers has also been determined. The results showed the effectiveness of the synthetic strategy proposed; moreover, a dramatic reduction of the reaction time and an important improvement of the monomers yield using microwave irradiation have been demonstrated. The monomers, as well as the polymers, showed excellent thermal stability both in air and nitrogen. It was also shown that the introduction of sulphur in the polyurethane backbone was effective in delaying the onset of degradation as well as the degradation rate.     

Effects of water vapor on the oxidation and the fracture strength of SiC layer in TRISO fuel particles

Steam oxidation of silicon carbide (SiC) layer in nuclear fuel particles were performed in flowing argon‐water vapor mixture with a total pressure of 1 bar at 1173‐1673 K. Both the phase composition and the microstructure of the oxide scale on the SiC layer varied with the oxidation temperature. Reaction rates of water vapor with the SiC layer were determined by measuring the oxide scale thickness. It was found that the oxidation of SiC layer follows the parabolic law. The activation energy was calculated to be 103±11 kJ/mol. It is proposed that the rate determine step of the oxidation is the diffusion of water vapor molecules in the oxide scale. The fracture strength of SiC shell after steam oxidation was evaluated using a crush test. The fracture strength decreased with the increase in the oxidation temperature due to the thinning of the SiC layer.