A 21-mW 8-b 125-MSample/s ADC in 0.09-mm/sup 2/ 0.13-/spl mu/m CMOS

This paper presents an 8-b two-step subranging analog-to-digital (ADC) using interpolation, averaging, offset compensation, and pipelining techniques to accomplish an effective number of bits of 7.6 b at 125 MSample/s. The 0.13-/spl mu/m CMOS ADC occupies 0.09 mm/sup 2/ and consumes 21 mW.     

Doppler spread estimation in mobile radio systems

In this letter, Doppler spread estimation in digital mobile radio systems is described. A maximum-likelihood approach is derived, and used to develop suboptimal approaches with lower complexity. The proposed algorithms rely on periodic channel estimation and can be used in both TDMA and CDMA systems     

The strain hardening rotating hollow shaft subject to a positive temperature gradient

Summary The modeling of deformation in flexible multibody systems is still under intensive investigation. While the floating frame of reference formulation has become a standard for the modeling of deformable moving bodies, formulations based on absolute coordinates are comparatively new. The recently developed absolute nodal coordinate formulation uses solely nodal position and slopes as degrees of freedom for structural elements. The numerical treatment is similar to the absolute coordinate formulation, which is investigated in the following. An efficient formulation based on absolute coordinates with a reduced strain tensor (similar to corotational formulations) has been derived recently, and the analogy to the floating frame of reference formulation has been shown. The efficiency of this formulation is based on a co-rotated stiffness matrix which is factorized only once, however, only linear constraints have been treated up to now. The present paper treats the extension of the advantages of the co-rotated formulation with respect to nonlinear constraints, damping and contact. Constraints are discussed for the special cases of linear and nonlinear dependence on the deformation degrees of freedom. The (implicit) Newmark scheme is used to illustrate the time stepping procedure within the present method. In the case of a small number of nonlinear constraints, a single time step can be performed by solving only a small system of nonlinear equations by means of Newton's method. A numerical example shows a method to reduce the number of constraints and illustrates the computational advantages of the proposed method.     

Speech perception test in Italian language for profoundly deaf children

Speech perception tests are an important part of procedures for diagnosing pre-verbal hearing loss. Merely establishing a child's hearing threshold with and without a hearing aid is not sufficient to ensure an adequate evaluation with a view to selecting cases suitable for cochlear implants because it fails to indicate the real benefit obtained from using a conventional hearing aid reliably. Speech perception tests have proved useful not only for patient selection, but also for subsequent evaluation of the efficacy of new hearing aids, such as tactile devices and cochlear implants. In clinical practice, the tests most commonly adopted with small children are: The Auditory Comprehension Test (ACT), Discrimination after Training (DAT), Monosyllable, Trochee, Spondee tests (MTS), Glendonald Auditory Screening Priocedure (GASP), Early Speech Perception Test (ESP), Rather than considering specific results achieved in individual cases, reference is generally made to the four speech perception classes proposed by Moog and Geers of the CID of St. Louis. The purpose of this classification, made on the results obtained with suitably differentiated tests according to the child's age and language ability, is to detect differences in perception of a spoken message in ideal listening conditions. To date, no italian language speech perception test has been designed to establish the assessment of speech perception level in children with profound hearing impairment. We attempted, therefore, to adapt the existing English tests to the Italian language taking into consideration the differences between the two languages. Our attention focused on the ESP test since it can be applied to even very small children (2 years old). The ESP is proposed in a standard version for hearing-impaired children over the age of 6 years and in a simplified version for younger children. The rationale we used for selecting Italian words reflect the rationale established for the original version, but the choice of single words follows different criteria from the original version. In fact, the two languages differ in important linguistic features so that the test can not be not adapted to the Italian language by simply translating the words involved. As currently there is no children's language dictionary in Italian arranged according to age bracket, we chose words used in children and in pre-school reading material.     

Analysis and Implementation of Multiple–Input, Multiple–Output VBLAST Receiver From Area and Power Efficiency Perspective

This paper presents an analysis of the vertical Bell Laboratories layered space time (VBLAST) receiver used in a multiple-input multiple-output (MIMO) wireless system from the hardware implementation perspective and identifies those processing elements that consume more area and power due to complex signal processing. This paper models a scalable VBLAST receiver based on minimum mean square error (MMSE) nulling criteria assuming a block flat fading channel. After identifying the major area and power consuming blocks, this paper proposes two area and power efficient VLSI architectures for the block that computes pseudoinverse of the channel matrix. This paper discusses different tradeoff issues in both architectures and compares them with the architectures in the literature     

Growth and characterization of Ni:DLC composite films using pulsed laser deposition technique

The structure and surface morphology of Ni-incorporated diamond like carbon (Ni:DLC) films have been investigated. These films were deposited on Si substrates using pulsed laser deposition (PLD) technique. A KrF Excimer laser (λ = 248 nm) was used for co-ablation from multi component Ni–graphite target. The concentration of Ni was varied by ablating the Ni part of the target with various numbers of laser pulses. The SEM and AFM analysis reveals that the surface is composed of segregates of Ni which increases with the increase in Ni content during the growth process. The structural investigations by XRD and Raman spectroscopy provided information about the orientation of the incorporated constituent and the ordering of the carbon species. Maximum height of the nano structures which were observed on the surface was ∼50 nm. The G-peak of the graphite was shifted towards higher wave number due to enhancement in SP² sites which have been increased due to the increase in the Ni concentration. A small change in the surface roughness ranging from 7.78 nm to 13.1 nm due to increased Ni concentration was also observed.     

Determination of Quality Level in Mass Housing Projects in Turkey

In Turkey, achievement of acceptable levels of quality in the construction sector has long been a problem. Great expenditures of time, money, and resources are wasted each year due to inefficient or nonexistent quality levels prevailing in the industry. The situation is even worse in the case of mass housing projects addressing to low and middle income groups. It is the purpose of this paper to identify the type of deviations resulting in rework in mass housing projects, since construction firms can only increase their profit margins by paying more attention to the deviation types. More importantly, firms can improve their images in the sector and thus, can take new projects. To achieve the objective mentioned above, data have been derived from 400 cases by means of a questionnaire containing 108 questions, and results of this survey were evaluated by several statistical techniques. It is concluded that households are not completely satisfied from the quality of products and/or services delivered within their housing units. In future studies, the causes and costs of the rework should be researched for better understanding the results together with the remedial measures being implemented.     

Ranging Accuracy in Dynamic Spectrum Access Networks

Theoretical analysis of time-of-arrival (TOA)-based high-precision ranging algorithm for the dynamic spectrum access networks (DSANs) is performed. The asymptotic frequency-domain Cramer-Rao bound (CRB) of the ranging algorithm that takes the frequency-dependent feature (FDF) and phase of multipath components (MPCs) into account is derived through Whittle formula. The effects of FDF-MPCs and related parameters such as absolute bandwidth and operating center frequency on the ranging accuracy are investigated. The results show that the impacts of the FDF-MPCs on the ranging accuracy can be significant and it is recommended utilizing as large absolute bandwidth as possible at low operating center frequencies to obtain high-precision distance information of the users in the DSANs     

The effect of etomidate induction on plasma cortisol levels in children undergoing cardiac surgery

Loyalty to one's extended family, a well-known Japanese tradition, has broken down following World War II. Child rearing in Japan, therefore, has been changing gradually and clearly. Traditionally, child rearing was taught to young mothers by the grandmothers. However, recently young couples are no longer living with their parents. Therefore, there are no advisers nor consultants available at home for their child rearing. Commercialism has certainly invaded the field of child rearing, including too many guidebooks and even baby-sitting companies. Children's lives have become much more competitive, busy and unnatural in comparison with those of 20-30 years ago. This might be one cause of the increased incidence of bullying, school phobia and psychological disorders in children.     

Ozonation of synthetic versus natural textile tannins: recalcitrance and toxicity towards Phaeodactylum tricornutum.

A sound in-plant pollution control strategy can only be defined by paying due attention to bio-recalcitrance and toxicity. In this context the levels of toxicity and inert COD introduced to textile dyebath discharges by two alternative auxiliary chemicals, namely natural tannin (NT) and synthetic tannin (ST), were investigated. The effect of 40 minutes ozonation at 1,000 mg h(-1) at pH 3.5 on the segregated effluent streams containing the above-mentioned tannin formulations was evaluated in terms of changes in toxicity and recalcitrance. The effect of ozonation on the COD distribution of raw and ozonated NT and ST samples according to their molecular weight cut-offs was also assessed. Both untreated tannin formulations exerted high acute toxicity towards marine microalgae Phaeodactylum tricornutum. Moderate decrease in the toxicity levels of both tannins was observed upon ozonation. The raw NT formulation with a COD content more than twice that of its alternative raw ST had an initially inert soluble COD content of only 25 mg/L, while the initially inert COD was 135 mg/L for ST. As the initially inert soluble COD content of NT was considerably lower, this textile auxiliary did not need chemical pretreatment to improve its biodegradability. On the other hand, the initially inert soluble COD content of ST was reduced by 70% by ozone pretreatment. In terms of residual COD contents achievable after passing through a biological treatment system, raw NT and pretreated ST formulations yielded 100 and 95 mg/L COD, respectively. The highest proportion of COD (46% for NT and 88% for ST) was found in the <1 kDa range. The same fraction increased to 93% for NT after ozonation, while for ST no significant change was observed in the COD distribution of the molecular weight cut-offs after ozonation.