Stress-strain behavior of styrene-acrylonitrile/glass bead composites in the glassy region

The effects of temperature, strain rate and filler content on tensile properties of SAN/glass bead composites are studied. A point of discontinuity on the stress-strain curves for unannealed composites is investigated, annealing results in smooth curves with no discontinuities. A simple model for the filler effect on yield stress is suggested and shown to be in a good agreement with experimental data. A double shifting procedure to account for the temperature and filler effects on yield stress as a function of strain rate is proposed. A single master curve that can be represented by the equation: relates composite yield stress to strain rate, temperature and filler volume fraction.     

Oriented short glass fiber composites. III. Structure and mechanical properties of molded sheets

Oriented short fiberglass mats prepared by the ERDE converging flow technique of fiber/glycerine dispersions were studied. Fiber orientation distribution in mats, prepregs and molded sheets were investigated by optical and X-ray techniques. Longitudinal and transverse fracture surfaces of short fiberglass/epoxy molded sheets were analyzed. The effect of fiber length on tensile properties was also studied. The experimental results obtained on longitudinal, transverse, and off-axis tensile modulus and ultimate strength were compared with classical elastic equations for continuous reinforcement.     

Rotational molding of thermosetting three-phase syntactic foams

Thermosetting three-phase syntactic foams consisting of glass micro balloons, resin, and air voids dispersed in the resin were studied and are reported in the present work. Specimens for measurements of density and compressive properties were cut from the syntactic foam walls of hollow products prepared in rotational molding. These walls are characterized by loose-packed structures, densities from 0.12 to 0.24 g/cm³, and compressive strength from 3 to 20 kg/cm². The free void fraction of these loose-packed structures is compared with close-packed structures as a function of resin weight fraction, and semi-quantitative relationships are derived. Potential applications of such hollow articles are as core materials for large products of complex geometries where light weight combined with a good balance of mechanical properties, low dielectric loss, and good thermal resistance are desired.     

Direct analytical procedure for determination of volatile organic acids in raw municipal wastewater

A direct analytical method for identification and determination of the individual volatile acids in raw sewage was developed. The proposed procedure is rapid, omitting tedious sample pretreatment and thus avoiding possible losses involved in steam distillation, evaporation or extraction. It consists of direct injection of raw sewage into a gas chromatograph, including Carbowax 20 M on acid washed Chromosorb W column and a flame ionization detector. Sample preparation is confined to addition of solid metaphosphoric acid to the raw sewage, and removal of precipitated proteins and suspended solids by centrifugation.The direct injection method proved to be practicable, accurate and rapid. Volatile acids content in raw municipal sewage in Haifa, Israel, was found to be in the range of 150–160 mg l⁻¹, of which 120–125 mg l⁻¹ was acetic acid, 30–33 mg l⁻¹ propionic acid, 6–8 mg l⁻¹ butyric acid, 2 mg l⁻¹ isovaleric acid, and 0.5–1 mg l⁻¹ valeric acid.     

Conductive blends of thermally dodecylbenzene sulfonic acid-doped polyaniline with thermoplastic polymers

In the present study, a conductive polyaniline-dodecyl benzene sulfonic acid (PANI-DBSA) complex, prepared by a thermal doping process, and its blends with thermoplastic polymers, prepared by melt processing, were investigated. PANI-DBSA characterization included conductivity measurements, morphology, crystallography, and thermal behavior. The blends' investigation focused on the morphology and the interaction between the components and on the resulting electrical conductivity. The level of interaction between the PANI and the matrix polymer determines the blend morphology and, thus, its electrical conductivity. Similar solubility parameters of the two polymeric components are necessary for a high level of PANI dispersion within the matrix polymer and, thus, enable the formation of conducting paths at low PANI content. The morphology of these blends is described by a two-structure hierarchy: (a) a primary structure, composed of small dispersed polyaniline particles, and (b) a short-range fine fibrillar structure, interconnecting the dispersed particles. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 66: 243–253, 1997     

Sodium phthalamates as corrosion inhibitors for carbon steel in aqueous hydrochloric acid solution

Three compounds of N-alkyl-sodium phthalamates were synthesized and tested as corrosion inhibitors for carbon steel in 0.5 M aqueous hydrochloric acid. Tests showed that inhibitor efficiencies were related to aliphatic chain length and dependent on concentration. N-1-n-tetradecyl-sodium phthalamate displayed moderate efficiency against uniform corrosion, 42–86% at 25 °C and 25–60% at 40 °C. Tests indicated that compounds behave as mixed type inhibitors where molecular adsorption on steel followed Langmuir isotherm, whereas thermodynamic suggested that a physisorption process occurred. XPS analysis confirmed film formation on surface, where Fe⁺² complexes and Fe⁺² chelates with phthalamates prevented steel from further corrosion.     

CoMo/Ti-SBA-15 catalysts for dibenzothiophene desulfurization

With a view to reducing the sulfur content in diesel fuels, novel desulfurization CoMo catalysts were supported on a Ti-loaded hexagonal mesoporous SBA-15 material. The Ti-SBA-15 substrates were synthesized using triblock copolymers as structure-directing agents. Catalytic activity was assessed in the model reaction of hydrodesulfurization (HDS) of dibenzothiophene (DBT), carried out in a batch reactor at T = 623 K and with a total hydrogen pressure of 3.1 MPa. The reaction proceeds via the direct desulfurization route (main route) and the hydrogenation (HYD) pathway. The incorporation of Ti into the SBA-15 afforded catalysts that were more active than the Ti-free counterpart, due to the enhancement of the DDS route in this reaction. This difference was explained in terms of a larger number of coordinately unsaturated sites (CUS) of the metal sulfide on Ti-loaded catalysts. Under steady-state conditions, the CoMoST20 catalyst with a Si/Ti ratio of 20 was the most active among the catalysts studied. Since this catalyst exhibited both Ti⁴⁺ ions incorporated into the SBA-15 framework and separate anatase TiO₂ clusters located on its surface, the activity enhancement on this sample was explained by the larger intrinsic activity of the “Co–Mo–S” phase located on these TiO₂ nanoparticles. The Ti-SBA-15 supports and the CoMo/Ti-SBA-15 catalysts were studied by N₂ adsorption–desorption isotherms, XRD, TEM, FTIR of adsorbed pyridine and NO, UV–vis DRS, TPR, micro-Raman and XPS spectroscopy.     

Aerosol characterisation in Italian towns by IBA techniques

The composition of particulate matter in the atmosphere of four major Italian towns (Florence, Genoa, Milan and Naples) has been studied with the extensive application of IBA techniques. The aerosol has been collected simultaneously in the four towns during the first weeks of year 2001, by two-stage continuous streaker samplers, which provide the separation of the particulate matter in two fractions. The concentrations in air of about 20 elements, and the total particulate mass, have been extracted in the PM2.5 and PM10 fractions with hourly resolution by PIXE, PIGE and optical analyses of about 2700 samples. IBA analyses have been performed at the 3 MeV external proton beam of the INFN accelerator facility at the University of Florence.     

Aspects of fetal physiology from 18 to 37 weeks' gestation as assessed by blood sampling

OBJECTIVE: To construct reference ranges for fetal pH, oxygen pressure (PO2), and hematologic and biochemical blood constituents, which can be used to analyze changes with gestation and differences with maternal values, thus elucidating some aspects of fetal biology and the effects of the maternal and placental environments. METHODS: We assayed venous pH, PO2, hematocrit, glucose, uric acid, urea, creatinine, total protein, total and direct bilirubin, aspartate aminotransferase, alanine aminotransferase, gamma-glutamyltransferase, alkaline phosphatase, lactic dehydrogenase, amylase, pseudocholinesterase, creatine kinase, triglycerides, and cholesterol concentrations in 157 fetuses and 134 mothers who underwent fetal blood sampling from 18 to 37 weeks' gestation. None of the fetuses was infected or had chromosomal, hematologic, or hormonal abnormalities. RESULTS: All the variables analyzed were similar in fetuses sampled at the placental cord insertion (n = 125) or at the intrahepatic vein (n = 32). Maternal and fetal concentrations of glucose (r = 0.79, P < .001), urea (r = 0.96, P < .001), creatinine (r = 0.83, P < .001), and uric acid (r = 0.94, P < .001) correlated significantly, and their differences exhibited significant changes: the maternal-fetal differences of glucose and urea increased, whereas those of uric acid and creatinine decreased with advancing gestation. Fetal pH and PO2 decreased with gestational age, whereas hematocrit increased, similar to what has been described previously. All of the other variables, with the exception of amylase and cholesterol, changed significantly during the investigated period of pregnancy. Gestational age explained at least 40% of the variance in values of fetal total protein, pseudocholinesterase, alanine aminotransferase, creatine kinase, and triglycerides, but only 3-25% of the variation in the remainder. Most enzymes were higher in the fetus than in the maternal circulation, and all except alkaline phosphatase increased with gestational age. The maternal-fetal glucose difference correlated significantly with hematocrit, pH, and PO2, independent of gestational age and independent of each other. CONCLUSION: With the exception of aspartate aminotransferase, all of the analyzed fetal variables were different from the maternal values, and most changed with gestational age. The mechanisms leading to these fetal specificities remain mostly uncertain, but the provision of reference ranges for several blood constituents may be useful in the differential diagnosis of fetal disease.     

Minima equalization: A useful strategy in automatic processing of microscopic images

Specifically stained features in microscopic images rarely have a unique range of grey levels which would permit selection of the features by simple thresholding. The spaces between features and immediately surrounding them are often as dark or darker than the more lightly stained features. An algorithm for minima equalization which facilitates the extraction and segmentation of such features was designed and is explained in intuitive terms. It is applied to the analysis of cross-sections of peripheral myelinated nerve fibres. It is shown that the binary image obtained can be combined with a gradient image to give a binary image which accurately reflects the thickness of the myelin in the original image. Using silver-impregnated nerve endings and bile canaliculi stained for thiamine pyrophosphatase, binary images like those prepared manually from thick specimens using a camera lucida can be obtained using the minima equalization procedure. The image processor is used to develop a composite image by combining images at various focal planes through the thick specimen. This image is then processed to obtain the binary image.