Polychlorierte Biphenyle (PCB) in Lebensmitteln

Zusammenfassung Im Rahmen eines koordinierten Forschungsprogramms des BMFT wurde eine orientierende Studie an möglichst repräsentativen Stichproben durchgeführt. Trotz relativ großer Streubreiten zeichnen sich die Bereiche der wichtigsten Lebensmittelgruppen deutlich voneinander ab mit Mittelwerten um 0,005 /g für fettarme pflanzliche Grundnahrungsmittel, um 0,05 /g für pflanzliche Nahrungsfette, um 0,3 /g für Milch-, Käse und Butterfette, um 0,15 /g für sonstige Nahrungsfette von Landtieren, um 0,03 /g für Hühnereier und um 10 /g für Fischfett. Wichtet man die Gehalte entsprechend der durchschnittlichen Diät in der BRD, so ergibt sich eine tägliche PCB-Aufnahme von rund 29 aus tierischen Fetten und rund 6 aus den übrigen Lebensmitteln. Die Gesamtaufnahme von ca. 35 g pro Tag und capita entspricht etwa dem Wert, der von der WHO als ADI-Wert für HCB (Hexachlorbenzol) in Aussicht genommen wurde.

---

Polychlorinated biphenyls (PCB) in foodThe situation in the Federal Republic of Germany

Summary In a coordinated research program of the Federal Ministry of Research and Technology (BMFT), a screening study was carried out with representative samples. In spite of rather large ranges of PCB concentrations, the most important food-stuffs show clearly defined clusters with mean values of approx. 0.005 /g in low fat food components of plant origin such as cereals or potatoes, approx. 0.05 /g in vegetable fats, approx. 0.3 /g in fat from milk, butter and cheese, approx. 0.15 gg/g in animal fat, approx. 0.03 in chicken eggs and approx. 10 /g in fish fat. Considering the mean diet in the FRG, a daily PCB intake of about 29 g from animal fat and of 6 from the other food-stuffs results. The total intake of about 35 g per day and capita is almost the same as the figure conditionally suggested by the WHO as the acceptable daily HCB (hexachlorobenzene) intake.

     

Model-based cloud resource management with TOSCA and OCCI

Software and Systems Modeling - With the advent of cloud computing, different cloud providers with heterogeneous cloud services (compute, storage, network, applications, etc.) and their related...     

Mass loss and flammability of insulation materials used in sandwich panels during the pre‐flashover phase of fire

Nowadays, buildings contain more and more synthetic insulation materials in order to meet the increasing energy‐performance demands. These synthetic insulation materials have a different response to fire. In this study, the mass loss and flammability limits of different sandwich panels and their cores (polyurethane (PUR), polyisocyanurate (PIR) and stone wool) are studied separately by using a specially designed furnace. Expanded polystyrene and extruded polystyrene are tested on their cores only. The research has shown that the actual mass loss of synthetic and stone wool‐based cores is comparable up to 300 °C. From 300 °C onwards, the mass loss of PUR panels is significant higher. The mass losses up to 350 °C are 7%, 29% and 83% for stone wool, PIR and PUR respectively, for the influenced area. Furthermore, delamination can be observed at exposure to temperatures above 250 °C for the synthetic and 350 °C for the mineral wool panels. Delamination occurs due to the degradation of the resin between core and metal panels and the gasification of the (PUR) core. The lower flammability limits have been established experimentally at 9.2% m/m (PUR) and 3.1% m/m (PS). For PUR, an upper limit of 74% was found. For PIR and mineral wool, no flammability limits could be established. Copyright © 2017 John Wiley & Sons, Ltd.     

Non-destructive evaluation of ripening and quality traits in apples using a multiparametric fluorescence sensor

BACKGROUND: The detection of pigments and colourless flavonoids in apples can provide a useful indication of fruit quality. Optical methods are preferable because they are fast and non‐destructive. In this study, a fluorescence‐based portable sensor was used in order to non‐invasively determine the content of chlorophylls, anthocyanins and flavonols in Fuji, Granny Smith and Golden Delicious apple cultivars. The aim was to define new non‐destructive optical indices of apple quality. RESULTS: The anthocyanin index (ANTH) in Fuji was higher in the sunny (i.e. sun‐exposed) side of the fruit compared to the shady side. For all cultivars, the flavonol index (FLAV) was higher in the sunny side compared with the shady side. The chlorophyll index (CHL) for the shady sides of Granny Smith and Golden Delicious was significantly higher than for the sunny sides. Fine linear regressions were found between the ANTH, FLAV and CHL indices and the actual anthocyanin, flavonol and chlorophyll concentrations, respectively, which were determined destructively on the apple peel extracts. A negative correlation was found between the apple sugar content and the chlorophyll fluorescence in the far‐red spectral band. CONCLUSION: Our results indicate that a single multiparametric fluorescence‐based sensor can provide valuable non‐destructive markers of ripening and quality in apples. Copyright © 2012 Society of Chemical Industry     

Calculation of thermal conductivity of gypsum plasterboards at ambient and elevated temperature

Plasterboard often protects steel structures of buildings because it conducts heat slowly and absorbs the heat of the fire by its volumetric enthalpy. The most important property governing the heat transfer is the thermal diffusion. This property depends on the density, specific heat and thermal conductivity. The first two can be calculated based on the mass composition of the board. The thermal conductivity is more difficult to derive since it is a directional property. This paper will focus on the calculation of the thermal conductivity at ambient and elevated temperatures. It is shown that the thermal conductivity of gypsum plasterboard (i.e. a porous medium) can be assumed to be a three‐phase system. Plasterboard consists of a solid phase and a water/air mix in the voids. The differences between different theoretical equations for both dry and moistured plasterboards are presented. The equation proposed by Zehner and Schlunder (Chem. Ing.‐Tech. 1972; 44 (23):1303–1308) with shape‐factor C of 5 gave good agreement with experimental data of the different boards. Furthermore, the influence of the composition of the boards on the thermal conductivity is investigated. This has an influence, especially since the composition is also related to its moisture content. Regression analysis points out that the moisture content depends only on the gypsum content. A value of 2.8% absorbed water on the mass of gypsum is found, and this water plays an important role in the thermal conductivity of plasterboard at ambient temperature. Finally, the thermal conductivity of board at elevated temperature is computed. A close fit between computed and experimental values derived from literature is found. Copyright © 2009 John Wiley & Sons, Ltd.     

Production of non-constructive concrete blocks using contaminated soil

In this research, a heavily contaminated humus-rich peat soil and a lightly contaminated humus-poor sand soil, extracted from a field location in the Netherlands, are immobilized. These two types of soil are very common in the Netherlands. The purpose is to develop financial feasible, good quality immobilisates, which can be produced on large scale.To this end, two binder combinations were examined, namely slag cement with quicklime and slag cement with hemi-hydrate. The mixes with hemi-hydrate proved to be better for the immobilization of humus rich soils, having a good early strength development. The heavily contaminated soil with 19% humus (of dm) could not be immobilized using 398 kg slag cement and 33 kg quicklime per m³ concrete mix (binder = 38.4% dm soil). It is possible to immobilize this soil using 480 kg binder (432 kg slag cement, 48 kg quicklime) per m³ of mix (58.2% dm). An alternative to the addition of extra binder (slag cement with quicklime) is mixing the soil with sand containing particles in the range of 0–2 mm. This not only improved the compressive strength of the immobilisates, but also reduced the capillary absorption. All the mixes with the lightly contaminated soil were cost-effective and suitable for production of immobilisates on a large scale. These mixes had good workability, a good compressive strength and a low capillary absorption. The leaching of all mixes was found to be much lower than allowed by the regulations. Given these results, the final mixes in the main experiment fulfilled all the financial and technical objectives.     

Decorrelation-based blood flow velocity estimation: effect of spread of flow velocity,linear flow velocity gradients,and parabolic flow

In recent years, a new method to measure transverse blood flow, based on the decorrelation of the radio frequency (RF) signals has been developed. In this paper, we investigated the influence of nonuniform flow on the velocity estimation. The decorrelation characteristics of transverse blood flow using an intravascular ultrasound (IVUS) array catheter are studied by means of computer modeling. Blood was simulated as a collection of randomly located point scatterers; moving this scattering medium transversally across the acoustical beam represented flow. First-order statistics were evaluated, and the signal-to-noise ratio from the signals were measured. The correlation coefficient method was used to present the results. Three velocity profiles were simulated: random spread of blood-flow velocity, linear blood-flow velocity gradient, and parabolic blood-flow. Radio frequency and envelope signals were used to calculate the decorrelation pattern. The results were compared to the mean decorrelation pattern for plug blood-flow. The RF signals decorrelation patterns were in good agreement with those obtained for plug blood flow. Envelope decorrelation patterns show a close agreement with the one for plug blood flow. For axial blood flow, there is a discrepancy between decorrelation patterns. The results presented here suggest that the decorrelation properties of an IVUS array catheter for measuring quantitative transverse blood flow probably will not be affected by different transverse blood-flow conditions     

Materials with cationic valence and conduction bands for photoelectrolysis of water

Two types of materials in which the highest filled and lowest empty electron bands are mainly cationic have been investigated, viz. Bi₄Ti₃O₁₂ and Bi₂WO₆ with a filled Bi 6s band and empty Ti(W) 3d(5d) bands and NiNb₂O₆ and CoNb₂O₆ with filled narrow transition metal bands and empty Nb 4d bands. Bi₄Ti₃O₁₂ shows weak photocurrents in a photoelectrochemical water decomposition cell, whereas Bi₂WO₆ does not. Also NiNb₂O₆ and CoNb₂O₆ behave differently. Whereas NiNb₂O₆ shows photocurrents, CoNb₂O₆ does not. These results are discussed in terms of bulk properties. The absence of a photocurrent is related to the formation of small polarons with high activation energy for migration. In agreement with this the compound Bi₂WO₆ shows luminescence.