Influence of alkali fiber treatment and fiber processing on the mechanical properties of hemp/epoxy composites

Industrial hemp fibers were treated with a 5 wt % NaOH, 2 wt % Na₂SO₃ solution at 120°C for 60 min to remove noncellulosic fiber components. Analysis of fibers by lignin analysis, scanning electron microscopy (SEM), zeta potential, Fourier transform infrared (FTIR) spectroscopy, wide angle X‐ray diffraction (WAXRD) and differential thermal/thermogravimetric analysis (DTA/TGA), supported that alkali treatment had (i) removed lignin, (ii) separated fibers from their fiber bundles, (iii) exposed cellulose hydroxyl groups, (iv) made the fiber surface cleaner, and (v) enhanced thermal stability of the fibers by increasing cellulose crystallinity through better packing of cellulose chains. Untreated and alkali treated short (random and aligned) and long (aligned) hemp fiber/epoxy composites were produced with fiber contents between 40 and 65 wt %. Although alkali treatment generally improved composite strength, better strength at high fiber contents for long fiber composites was achieved with untreated fiber, which appeared to be due to less fiber/fiber contact between alkali treated fibers. Composites with 65 wt % untreated, long aligned fiber were the strongest with a tensile strength (TS) of 165 MPa, Young's modulus (YM) of 17 GPa, flexural strength of 180 MPa, flexural modulus of 9 GPa, impact energy (IE) of 14.5 kJ/m², and fracture toughness (K_Ic) of 5 MPa m^1/2. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Non-destructive evaluation of ripening and quality traits in apples using a multiparametric fluorescence sensor

BACKGROUND: The detection of pigments and colourless flavonoids in apples can provide a useful indication of fruit quality. Optical methods are preferable because they are fast and non‐destructive. In this study, a fluorescence‐based portable sensor was used in order to non‐invasively determine the content of chlorophylls, anthocyanins and flavonols in Fuji, Granny Smith and Golden Delicious apple cultivars. The aim was to define new non‐destructive optical indices of apple quality. RESULTS: The anthocyanin index (ANTH) in Fuji was higher in the sunny (i.e. sun‐exposed) side of the fruit compared to the shady side. For all cultivars, the flavonol index (FLAV) was higher in the sunny side compared with the shady side. The chlorophyll index (CHL) for the shady sides of Granny Smith and Golden Delicious was significantly higher than for the sunny sides. Fine linear regressions were found between the ANTH, FLAV and CHL indices and the actual anthocyanin, flavonol and chlorophyll concentrations, respectively, which were determined destructively on the apple peel extracts. A negative correlation was found between the apple sugar content and the chlorophyll fluorescence in the far‐red spectral band. CONCLUSION: Our results indicate that a single multiparametric fluorescence‐based sensor can provide valuable non‐destructive markers of ripening and quality in apples. Copyright © 2012 Society of Chemical Industry     

Potential anxiolytic properties of R-(+)-8-OSO2CF3-PAT, a 5-HT 1A receptor agonist

The inhibitory effect of 2% ethanol (400 mM) in the incubation medium on several characteristics of the Na(+)-ATPase of basolateral plasma membranes from rat kidney proximal tubular cells was investigated. Ethanol did not change the Km of the enzyme for Mg2+, ATP or Na+; it did not change either the optimal pH or temperature values of the incubation medium for the enzyme to act and finally, it did not affect the apparent energy of activation of the enzyme. It was also found that 2% ethanol produced stronger inhibition of the ATPase when it is in an activated or stimulated state, than when it is working at its lower basal level. The presented results can be explained by assuming that 2% ethanol in the incubation medium inhibits Na(+)-ATPase activity by affecting the enzyme structure as well as its activating mechanism.     

Intravascular ultrasound elastography

Asthma, a chronic disease of the respiratory tract, affects approximately five percent of the U.S. population, including almost five million children. Childhood asthma has been identified as the leading cause of school absences. This study was to examined efficacy of a school-based program to prevent exacerbation of asthma symptoms and manage asthma in school children using measured doses of an inhaled anti-inflammatory medication. The sample consisted of 22 African-American children in one inner-city elementary school in Dallas, Texas, ages 5-12 years with confirmed diagnoses of asthma. For three months, each child came to the school clinic two times per day for medication administration and measurement of respiratory peak flow rates. Data were collected for a number of variables including bronchodilator use, school absences, self-report of asthma symptoms, and number of visits to the physician. During the study, mean peak flow rates improved approximately 15%, and bronchodilator use decreased 66%. Improvement also was evident in several other areas.     

Advances in Fabrication of TES μ-Calorimeter Arrays and Associated Filter Structures for AC-Biased Read Out

In this paper we describe microfabrication developments for a 1024 pixel calorimeter array, to be used in future X-ray spectroscopic space missions. We report on an optimization study of high packing factor, mushroom shaped, Cu/Bi absorbers, for which a sputter deposition technique into a new type of photoresist mould has been developed. We have fabricated a prototype 32×32 array where 98 representable pixels are potentially functioning TESs. To gain more control on the detector pixel performance a new procedure was developed to couple absorber and thermometer, utilizing a thin insulating layer. Advances are reported in the fabrication of superconducting LC resonating circuits, needed for frequency domain multiplexed read out. A quality factor Q∼4000 @ 2.6 MHz has been measured, which was limited by critical current in the circuit.      

18O-tracer diffusion along nanoscaled Sc2O3/yttria stabilized zirconia (YSZ) multilayers: on the influence of strain

Abstract

The oxygen tracer diffusion coefficient describing transport along nano-/microscaled YSZ/Sc₂O₃ multilayers as a function of the thick­ness of the ion-conducting YSZ layers has been measured by isotope exchange depth profiling (IEDP), using secondary ion mass spec­trometry (SIMS). The multilayer samples were prepared by pulsed laser deposition (PLD) on (0001) Al₂O₃ single crystalline substrates. The values for the oxygen tracer diffusion coefficient were analyzed as a combination of contributions from bulk and interface contributions and compared with results from YSZ/Y₂O₃-multilayers with similar microstructure. Using the Nernst–Einstein equation as the relation between diffusivity and electrical conductivity we find very good agreement between conductivity and diffusion data, and we exclude substantial electronic conductivity in the multilayers. The effect of hetero-interface transport can be well explained by a simple interface strain model. As the multilayer samples consist of columnar film crystallites with a defined inter­face structure and texture, we also discuss the influence of this particular microstructure on the interfacial strain.     

Modelling the Resistive State in a Transition Edge Sensor

We have developed a model for the resistive transition in a transition edge sensor (TES) based on the model of a resistively shunted junction, taking into account phase-slips of a superconducting system across the barriers of the tilted washing board potential. We obtained analytical expressions for the resistance of the TES, R(T,I), and its partial logarithmic derivatives α _I and β _I as functions of temperature and current. We have shown that all the major parameters describing the resistive state of the TES are determined by the dependence on temperature of the Josephson critical current, rather than by intrinsic properties of the S-N transition. The complex impedance of a pristine TES exhibits two-pole behaviour due to its own intrinsic reactance.     

Iridescent colors on seashells: an optical and structural investigation of Helcion pruinosus

Many animal species display exceptionally bright iridescent coloration caused by interference or diffraction from a periodic surface microstructure. Although many mollusks are colored, only few utilize such a form of structural coloration. We are not referring to the well-known pearly appearance that is due to the nacreous layer found on the inner surfaces of most shells, but to small brightly colored spots on the outer surface. The Helcion pruinosus is one such example. We show by optical measurements and scanning electron microscopy (SEM) that coloration in this shell is indeed of a structural nature based on thin-film interference from a layered quarter-wave stack tilted by approximately 24 degrees with respect to the outer surface. The microstructure is embedded in the transparent top layer of the shell approximately 50 microm below the surface. By comparing the SEM and optical measurements, we were able to establish that the layered structure is made from a birefringent material (crystalline aragonite) giving slightly different spectral peaks for S- and P-type reflections.