Health trajectories: long-term dynamics among black and white adults

Flow cytometry is a unique technology useful in the examination of effects of immunotoxic agents on target cells of the immune system. The purpose of this workshop was to provide an overview of the use of flow cytometry in new and established models of immunotoxicity, with emphasis on the potential applications, assay validation, and potential pitfalls. This overview begins with a discussion of methods useful in the assessment of Ca2+-dependent mechanisms of lymphoid cell activation in surface marker-defined human B cells, T cells, and monocytes. A discussion of the use of flow cytometry in analysis of apoptosis is also presented in this paper. The second paper presents data on the development and use of flow cytometry as an alternative to a Cr51 release assay for an assessment of cytotoxic T cell activation. The use of surface markers for characterizing and distinguishing the effects of chemical irritants from sensitizers is next presented, followed by an overview of the use of fluorescent probes to assess cell thiol status and overall oxidant-induced injury to lymphoid cells. Finally, an interlaboratory study designed to compare and evaluate the use of flow cytometry procedures in rat splenic cell subtyping is presented. Overall, these studies demonstrate the utility of flow cytometry assays in immunotoxicologic research, but further efforts are needed in the validation of many of these assays for routine use in immunotoxicologic testing.     

Patient preference for self-collected cultures for group B streptococcus in pregnancy

The purpose of this study was to examine the factors which affect the level of fatigue among patients participating in clinical trials in which this symptom had been assessed with the EORTC QLQ-C30. Data were assembled from 2390 patients in ten clinical trials in which the QLQ-C30 had been used to assess baseline and on-study quality of life. The relationship between the level of fatigue reported by the patients on the fatigue scale of this questionnaire and patient and disease characteristics was assessed in univariate and multivariate cross-sectional analyses. In addition, changes in fatigue scores were compared in a longitudinal analysis among patients on two arms of an anti-emetic trial whose emesis control was markedly different. Baseline fatigue levels differed substantially among patients taking part in the different trials. Factors associated with greater fatigue severity on univariate analysis included: female gender, presence of metastatic disease, and poorer performance status. In addition, on multivariate analyses the oldest patients were found to have less fatigue, as were patients with breast cancer, while patients with ovarian and lung cancer experienced greater fatigue. Patients on the arm of the anti-emetic trial in which emesis was better controlled showed significantly less increase in fatigue after receiving chemotherapy. The fatigue scale of the QLQ-C30 appears to provide a useful approach to assessing this important symptom. The relationships found between fatigue and patient and disease characteristics need further exploration as does the degree to which the QLQ-C30 fully captures this dimension of quality of life.     

Bone SPECT of the jaws after fracture, onlay osteoplasty of insertion of implants

AIM: The aim of this study was early differentiation between uncomplicated and complicated processes of healing in the jaw using bone SPECT. METHODS: Investigations were performed in 40 mandibular fractures and 26 jaws after onlay osteoplasty as well as secondary insertion of implants. Bone SPECT was carried out within 1-2 months and after approximately 4-5 months. The uptake in the jaw was assessed semi-quantitatively using ROI analysis. RESULTS: Fractures with uncomplicated healing showed a decrease of uptake in follow-up, whereas fractures with an infection in the later course showed an increase, resulting in a significantly higher uptake at the follow-up investigation for the latter group. 1-2 months after onlay osteoplasty significantly lower uptake was found in regions with later occurrence of sequestration. In regions with implants in which osseointegration failed, there was significant reduction of uptake initially and significant elevation at the follow-up investigation. CONCLUSION: These results indicate a prognostic relevance of bone SPECT in the evaluation of processes of healing in the jaw.     

Fungicidal effect of 15 disinfectants against 25 fungal contaminants commonly found in bread and cheese manufacturing.

Resistance of 19 mold and 6 yeast species to 15 commercial disinfectants was investigated by using a suspension method in which the fungicidal effect and germination time were determined at 20 degrees C. Disinfectants containing 0.5% dodecyldiethylentriaminacetic acid, 10 g of chloramine-T per 1, 2.0% formaldehyde, 0.1% potassium hydroxide, 3.0% hydrogen peroxide, or 0.3% peracetic acid were ineffective as fungicides. The fungicidal effect of quaternary ammonium compounds and chlorine compounds showed great variability between species and among the six isolates of Penicillium roqueforti var. roqueforti tested. The isolates of P roqueforti var. carneum, P. discolor, Aspergillus versicolor, and Eurotium repens examined were resistant to different quaternary ammonium compounds. Conidia and vegetative cells were killed by alcohols, whereas ascospores were resistant. Resistance of ascospores to 70% ethanol increased with age. Both P. roqueforti var. roqueforti and E. repens showed great variability of resistance within isolates of each species.     

Room electromagnetics

In analogy with the established discipline of room acoustics, various aspects of diffuse wideband microwave propagation in a room are treated. It is shown that an equivalent to Sabine's equation for reverberation time in a room is valid for the completely diffused field, depending only on the volume, the surface area, and an effective absorption coefficient. An exponential decay of the power as a function of the delay is a consequence of the assumptions. Furthermore, the concept of a reverberation distance is also valid. This is the distance from a transmitting antenna where the received diffuse, randomly scattered power equals the direct line-of-sight received power, such that the diffuse power dominates for distances larger than the reverberation distance. A number of measurements in a large room support the theory with an effective absorption coefficient of 0.5. The power delay profiles around the room from a transmitter in the ceiling vary only in the first arriving part of the impulse, whereas the tail, being dominated by the diffuse field, has the same power level for a given delay and the same decay rate all over the room. It is also a consequence of the theory that the diffuse fields incident on an antenna are uniformly distributed in angle.     

Residual fracture energy of high-performance and normal concrete subject to high temperatures

Test data on the residual fracture energy of two significantly different concrete types are presented. About 80 beams of high performance basalt concrete and ordinary gravel concrete have been tested in accordance with the RILEM work of fracture method. The beams are heated at 1°C per minute up to a certain maximum temperature and kept at this temperature for 8 hours before cooling them back to room temperature and testing in three-point bending. The tests show that the two concretes behave almost identifical when the fracture energyG _F is considered as a function of maximum temperature. It is found that the damage introduced by a maximum temperature of 300 to 400°C increases the fracture energy by 50% compared with the reference tests at room temperature. A more tortuous crack surface is one plausible explanation for the significant increase inG _F. The article also presents temperature and weight loss recordings from the heating scenarios and finally, the characteristic length and the cohesive tensile softening curve are shown to depend on the maximum temperature. Basically it is demonstrated that the temperature exposure makes the concrete significantly more ductile.

---

Résumé Des données sur l'énergie résiduelle de rupture de deux bétons différents sont présentées. Environ 80 poutres de béton à base de basalte de très haute performance et de béton à base de gravier ordinaire ont été examinées conformément au travaux de la RILEM sur l'énergie de rupture. Les poutres sont chauffées à 1°C par minute jusqu'à une température maximale, puis maintenues à cette température pendant 8 heures avant d'être refroidies de nouveau à la température ambiante. Les poutres sont ensuite testées en flexion (système de flexion en trois points). Les essais prouvent que les deux bétons se comportent d'une manière presque identique quandG _F est considéré comme une fonction de la température maximale. On peut aussi constater que le dommage occasionné par une température maximale de 300 à 400°C augmente l'énergie de rupture de 50% par comparaison aux essais de référence réalisés à la température ambiante. Une surface de rupture plus tortueuse semble être une explication plausible pour l'augmentation significative deG _F. L'article présente également les évolutions de la température et de la perte de poids pour les scénarios de chauffage utilisés. En conclusion, cette étude montre que la longueur caractéristique et la courbe de post pic dépendent de la température maximale. Fondamentalement cela démontre que l'exposition à la température rend le béton sensiblement plus ductile.

     

The effect of cyclic stress on the physical properties of a poly(dimethylsiloxane) elastomer

The dynamic creep behavior of a filled poly(dimethylsiloxane) elastomer was studied under cyclic stress. The stress level was chosen such that the increase in the internal temperature was small and that microcracks were not observed. This work has demonstrated that cyclic stress in combination with high temperature accelerates the degradation of the elastomer. The results suggest that because of the applied force, breaks in the load-bearing chains of the network occur. These breaks, while relieving the mechanical stress, create highly reactive ionic fragments. It is believed that because of the subsequent reactions of the ionic fragments, changes in the specific gravity, storage modulus, effective crosslink density, and length of the sample (creep) are observed. The observed decrease in the storage modulus is thought to occur because of the reaction of the ionic fragments with moisture, which results in the formation of silanol chain ends that reduce the effective crosslink density. The results also show that contrary to the prediction of the Boltzmann's Superposition Principle, the rate of creep is greatly enhanced when the sample is subjected to a sinusoidally varying dynamic load as compared to a comparable static load. The polymer weight loss was found to be linear with time and strongly dependent on the level of applied dynamic and static force. In addition, the weight loss and rate of creep were also found to be strongly dependent upon temperature.     

Comparative antagonism of kainate-activated kainate and AMPA receptors in hippocampal neurons

Native kainate receptors expressed by cultured hippocampal cells were studied in the whole-cell configuration of the patch-clamp technique by using a fast perfusion system. About 80% of the neurons expressed kainate receptors independently of the time in culture (0-4 days), which coincided with the number of cells immunoreactive for a monoclonal antibody against the GluR5/6/7 subunits. Three types of cells were considered: neurons in which the rapid application of kainate induced a rapidly desensitizing current, cells in which kainate induced a more slowly rising, non-desensitizing, response and those in which a mixture of both responses was apparent. Steady responses induced by 300 microM kainate were inhibited by 6-cyano-7-nitroquinoxaline-2,3-dione (CNQX) in a dose-dependent manner (IC50 = 0.92 microM). CNQX was less potent in blocking transient kainate-induced responses (IC50 = 6.1 microM). Responses to kainate, whether steady or transient, were also inhibited by NS102, showing poor selectivity for the transient response (IC50 = 4.1 and 2.2 microM respectively). The new alpha-amino-3-hydroxy-5-methyl-4-isoxazole (AMPA) receptor antagonist NS394 was very potent in inhibiting steady kainate-induced currents (IC50 = 0.45 microM), but was even more effective in preventing peak responses (IC50 = 0.13 microM). In contrast, cyclothiazide did not affect transient kainate-induced responses but did potentiate current induced by activation of AMPA receptors by AMPA or kainate. These results demonstrate the lack of complete selectivity amongst some available competitive antagonists for AMPA and kainate receptors, and indicate that kainate receptors expressed by hippocampal cells lack the cyclothiazide modulatory site present at AMPA receptors. In addition, the present data support the idea that low-affinity kainate binding sites in the brain correspond to receptor channels selectively activated by kainate.     

Ionophore-mediated uptake of ciprofloxacin and vincristine into large unilamellar vesicles exhibiting transmembrane ion gradients

A new method, based on the ion-translocating properties of the ionophores nigericin and A23187, is described for loading large unilamellar vesicles (LUVs) with the drugs vincristine and ciprofloxacin. LUVs composed of distearoylphosphatidylcholine/cholesterol (DSPC/Chol) (55:45 mol/mol) or sphingomyelin (SPM)/Chol (55:45 mol/mol) exhibiting a transmembrane salt gradient (for example, internal solution 300 mM MnSO4 or K2SO4; external solution 300 mM sucrose) are incubated in the presence of drug and, for experiments involving divalent cations, the chelator EDTA. The addition of ionophore couples the outward movement of the entrapped cation to the inward movement of protons, thus acidifying the vesicle interior. External drugs that are weak bases can be taken up in response to this induced transmembrane pH gradient. It is shown that both nigericin and A23187 facilitate the rapid uptake of vincristine and ciprofloxacin, with entrapment levels approaching 100% and excellent retention in vitro. Following drug loading, the ionophores can be removed by gel exclusion chromatography, dialysis, or treatment with biobeads. In vitro leakage assays (addition of 50% mouse serum) and in vivo pharmacokinetic studies (in mice) reveal that the A23187/Mn2+ system exhibits superior drug retention over the nigericin/K+ system, and compares favorably with vesicles loaded by the standard DeltapH or amine methods. The unique features of this methodology and possible benefits are discussed.