Corrosion of Three Commercial Steels Under ZnCl2 –KCl Deposits in a Reducing Atmosphere Containing HCl and H2S at 400–500°C

The corrosion of three commercial steels in a reducing atmosphere containing HCl plus H₂S in the presence of ZnCl₂–KCl deposits has been investigated at 400–500°C and compared with the corrosion of the same materials in a similar gas mixture free from H₂S. The presence of H₂S in the gas accelerated the corrosion of the three commercial steels beneath ZnCl₂–KCl deposits. All materials suffered from severe corrosion with partial detachment and spalling of the external scales. Degradation of the steels resulted from the penetration of chlorine-containing species through the scale formed initially down to the metal matrix, because chorine-rich species were detected close to the alloy/scale interface. Although the corrosion resistance generally increased with increasing Cr content, even the high-Cr stainless steel SS304 is still unable to provide good corrosion resistance against the ZnCl₂–KCl deposits in the presence of H₂S due to the bad adherence of the scales to the alloy. The mechanisms of attack are discussed on the basis of thermodynamic considerations and of the active-oxidation model.     

浅色耐磨丁腈橡胶硫化胶配合技术初探

用经过表面处理的沉淀法白炭黑及合适的配合工艺制备的浅色丁腈橡胶胶料，具有较好的物理机械性能：拉伸强度２２ＭＰａ，扯断伸长率３３０％，硬度８２（邵尔Ａ型）度。阿克磨耗０．０２ｃｍ＾３。     

二甲醚燃料的生产及应用

甲醇催化脱水可得二甲醚。它可用作化工原料，气雾剂汝民用燃料。本文介绍燃料级二甲醚的生产及二甲醚液化气、醇－醚燃料的应用概况。     

Surface and interfacial FTIR spectroscopic studies of latexes. IX. The effect of homopolymer and copolymer structures on surfactant mobility in Sty/BA latices

The effects of homopolymer and copolymer compositions and structures in styrene/n-butyl acrylate (Sty/BA) latices on sodium dioctyl sulfosuccinate (SDOSS) surfactant mobility and its preferential concentration at the film–air (F–A) and film–substrate (F–S) interfaces were examined using attenuated total reflectance Fourier transform infrared (ATR FTIR) spectroscopy. It appears that the SDOSS concentration at the F–S interface is highest when the Sty/BA feed ratio is 50/50, and the excess of Sty results in migration of SDOSS surfactant to the F–A interface. This behavior is attributed to the increased glass transition temperature and diminished compatibility between surfactant molecules and copolymer latex. This study also shows that the primary factors that influence exudation to either F–A or F–S interfaces are surface tension of the substrate, glass transition temperature, water flux during coalescence, and compatibility between latex components. © 1995 John Wiley & Sons, Inc.     

The effect of sputter etching on the surface characteristics of dyed aramid fabrics

Three kinds of aramid fabrics, Technora (modified p-aramid), Conex (m-aramid) and Kevlar (p-aramid), were subjected to sputter etching and argon low-temperature plasma treatments after dyeing in black with disperse dyes. The depth of shade increased considerably on Technora and Kevlar with the sputter etching treatment, but not on Conex fabrics. Argon low-temperature plasma treatment had virtually no effect on the depth of shade on the aramid fabrics.     

气-电纺PHB引导组织再生膜的仿生矿化研究

实验将PHB通过气流-高压静电纺丝制成无纺膜，利用扫描电镜（SEM）、X射线衍射（XRD）对其形态和结构进行表征。在体外研究中，分别将无纺膜样本浸入37℃1．5倍仿生体液（SBF）中3、7、14、28d后对其表面形态和结构进行表征。结果表明，气电纺PHB无纺膜由超细纤维交织而成，纤维之间有多孔形成；通过气流一静电纺丝之后，PHB的结晶度及晶体的有序度降低；PHB膜在SBF中浸泡3天之后就有矿化结晶在纤维的表面形成，随着浸泡时间的增长，矿化结晶的数目增加，结晶度也随之增高，XRD及FTIR表明形成的结晶为含有碳酸根的磷灰石晶体。     

电阻点焊多信息采集系统

从工业应用的角度出发,考虑到实际的运行环境,设计了以"智能终端 数据处理设备 计算机"为数据采集方式的、全新的电阻点焊多信息采集系统.该系统将传感器和数据采集模块整合为智能终端,实现了所采集数据的本地模数转换,提高了系统的抗干扰性.数据传输采用数据包的形式,每一个包的开始为寻址字节,中间为数据字节(包括命令),最后为两个CRC校验字节,提高了数据传输的可靠性.智能终端与数据处理设备通过内部通信网络连在一起,提高了系统的可扩展性.数据处理设备与计算机的通讯是通过并口实现的,解决了通信速率的瓶颈问题.     

Spline-based automatic path generation of welding robot

This paper presents a flexible method for the representation of welded seam based on spline interpolation. In this method, the tool path of welding robot can be generated automatically from a 3D CAD model. This technique has been implemented and demonstrated in the FANUC Arc Welding Robot Workstation. According to the method, a software system is developed using VBA of SolidWorks 2006. It offers an interface between SolidWorks and ROBOGUIDE, the off-line programming software of FANUC robot. It combines the strong modeling function of the former and the simulating function of the latter. It also has the capability of with on-line robot. The result data have shown its high accuracy and strong reliability in experiments. This method will improve the intelligence and the flexibility of the welding robot workstation.     

K9玻璃与2507不锈钢的真空钎焊

采用不同Ti含量的SnAgCu-x%Ti复合钎料对K9玻璃与2507不锈钢进行了真空钎焊,研究了Ti含量对接头界面组织和力学性能的影响。采用场发射扫描电子显微镜(SEM)、能谱仪(EDS)和光学数码显微镜(OM)对钎焊接头组织结构进行了分析,用万能材料试验机对接头进行了剪切试验测试得到其力学性能,并对断口界面进行了分析。结果表明,接头界面典型组织结构为2507不锈钢/FeSn2/FeSn/Sn(s,s)/Ti-Sn/K9玻璃。随着复合钎料中Ti含量的增加,接头界面中Ti-Sn化合物增多,且剪切强度升高。在钎焊温度为675 ℃,保温时间为10 min时,接头室温剪切强度最高达7.3 MPa。钎焊接头断裂于K9玻璃并延伸至钎料中。     

溶液法合成端羧基聚丁二烯

以过氧化戊二酸为引发剂，无水乙醇或丙酮为溶剂，采用自由基型溶液法合成了端羧基聚丁二烯，并用ＩＲ对聚合物的微观结构进行了表征。结果表明当聚合反应温度为１０５￣１１５℃时，合理搭配引发剂起始用量和连续加入引发剂的递减速率，可合成满足不同应用领域的端羧基聚丁二烯产品。