Heat Source in Infinite Plane with Elliptic Rigid Inclusion and Hole

The plane thermoelastic problems of a stationary heat source in an infinite plane with an elliptic rigid inclusion and an elliptic hole are analyzed under thermally adiabatic and isothermal boundary conditions. The problems of an elliptic rigid inclusion are derived for the following cases: (1) the case that there are rigid-body displacement and rotation; and (2) the case that there is no rigid-body displacement or rotation. To analyze these problems, the following three fundamental solutions are derived: Problem A, in which a point heat source exists within an infinite domain; Problem B, in which the inclusion has a small amount of rotation; and Problem C, in which the inclusion is subjected to concentrated loads. Two cases can be obtained by superimposing these fundamental solutions. For the hole problem, the fundamental solution (Green's function) is also derived. In analysis, the complex stress functions, the mapping function, and the thermal dislocation method are used. The complex stress functions are obtained as a closed form. For analytic examples, the stress distributions are shown under thermally adiabatic and isothermal boundary conditions. For the crack problem, the stress intensity factors are shown for the location of the heat source.     

Particle arrangement and its application

The method by which micrometer-sized particles are arranged, is described. An electrified pattern is drawn on a polished insulating substrate using a SEM with a CAD facility. The substrate is dipped in a suspension of particles. The particles adhere to the substrate and form the pattern corresponding to the electrified pattern by the electrostatic force. The arranged particles are fixed by coating with a fluoride polymer of thin film. The method is applicable to the production of an inflammable gas sensor.     

Overcharge protection effect and reaction mechanism of cyclohexylbenzene for lithium ion batteries

We studied the relationship between the structure of aromatic compounds and the overcharge protection effect, using cyclohexylbenzene, isopropylbenzene, and toluene as the overcharge protection agents. Cyclohexylbenzene proved to be the most effective overcharge protection agent among these aromatic compounds. The effect is enhanced using a higher concentration of cyclohexylbenzene and elevated temperatures. The reaction product of cyclohexylbenzene was analyzed using field desorption mass spectrometry to elucidate its reaction mechanism. The results suggested that some of the overcharge reaction products of CHB were more reactive than that of IPB, which is consistent with the better suppressing effect on overcharging of the active material in the positive electrode.     

Antioxidative activities of some peptides isolated from hydrolyzed potato protein extract

Three peptides (5A, 5C and 6C), purified from potato protein hydrolysate fractions, possessed antioxidative activities. Isolation and purification were carried out using gel permeation chromatography and successive reverse-phase HPLC. These three peptide fractions were sequenced and identified as Phe-Gly-Glu-Arg, Phe-Asp-Arg-Arg and Phe-Gly-Glu-Arg-Arg, respectively. The fractions 5A, 5C and 6C inhibited linoleic acid oxidation by 55.3%, 58.5% and 61.7% using β-carotene decolorization assay system, while the inhibition ratio was 32.1%, 93.0% and 93.4% in the ferric thiocyanate assay system, respectively. The peptide fractions 5A, 5C and 6C also repressed lipid oxidation by 24.2%, 14.7% and 26.4% in the erythrocyte membrane ghost assay system, respectively. Oral administration of 100 mg/kg of body weight of the chemically synthesized peptides, 5A, 5C and 6C to rats (male Wistar) 30 min prior to ethanol injection reduced ethanol-induced gastric mucosal damage by 67.9%, 57.0% and 60.3%, respectively. Conclusively, these peptides have shown real potent antioxidative activities and could further be investigated for potential use as food additives.     

Recent Advances in Communication and Internet Technology

Telecommunication Systems -     

Structure and expression of bombyxin E1 gene: a novel family gene that encodes bombyxin-IV, an insect insulin-related neurosecretory peptide

Comparison was made of the ability of two dihydropyridine calcium channel antagonists, nitrendipine and felodipine, to prevent a range of signs of ethanol withdrawal. The increases in handling-induced behavior seen in mice during withdrawal from chronic ethanol treatment were prevented by administration of nitrendipine, 50 mg/kg, but not by, felodipine, 10 mg/kg, a dose that caused a similar displacement of dihydropyridine binding in central nervous system tissue, in vivo and in vitro. A higher dose of felodipine, 20 mg/kg, also had no effects. Nitrendipine, but not felodipine, prevented audiogenic seizures during the withdrawal phase. Similarly, nitrendipine prevented both the decrease in thresholds for N-methyl-DL-aspartate seizures and the increase in thresholds for convulsions due to 4-aminopyridine, which were seen during the withdrawal period, while felodipine did not alter either of these changes. Withdrawal from the ethanol chronic treatment increased the thresholds to seizures produced by intravenous aminophylline; this change was also prevented by nitrendipine. The significance of this increase in thresholds was lost after felodipine administration. In naive mice (not treated with ethanol) the doses of nitrendipine and felodipine used in the withdrawal studies were tested against the effects of convulsant drugs. Both dihydropyridines increased, to similar extents, the thresholds for seizures produced by bicuculline, pentylenetetrazol, and by N-methyl-DL-aspartate. The thresholds for aminophylline were unaltered by either dihydropyridine. In contrast, the thresholds for seizures due to 4-aminopyridine in the naive animals were not changed by felodipine, but were increased by nitrendipine. The results suggest that changes in potassium, as well as calcium, may possibly be involved in some of the stages of the ethanol withdrawal syndrome.     

Atomically flat diamond (111) surface formation by homoepitaxial lateral growth

A process of homoepitaxial growth of diamond (111) films by microwave plasma-enhanced chemical vapor deposition has been investigated characterizing areas by ex-situ atomic force microscopy. The evolution of surface morphology during a lateral growth of (111) diamond was visualized utilizing a mesa structure as a marker. Lateral growth forms atomically flat surfaces, which show atomically flat terraces over several hundred nm widths and single bilayer steps of (111) diamond.     

A dynamic multicast routing satisfying multiple QoS constraints

In this paper we propose a QoS‐based routing algorithm for dynamic multicasting. The complexity of the problem can be reduced to a simple shortest path problem by applying a Weighted Fair Queuing (WFQ) service discipline. Using a modified Bellman–Ford algorithm, the proposed routing builds a multicast tree, where a node is added to the existing multicast tree without re‐routing and satisfying QoS constraints. With user defined life‐time of connection this heuristic algorthm builds multicast tree which is near optimum over the whole duration of session. Simulation results show that tree costs are nearly as good as other dynamic multicast routings that does not consider QoS. Copyright © 2003 John Wiley & Sons, Ltd.     

Property of eigenvalues and eigenfunctions for an interface V-notch in antiplane elasticity

The so-called pseudo-orthogonal property of the eigenfunction expansion form is proved to be valid for the case of an antiplane interface V-notch and the corresponding path-independent integral is derived. The relation between the path-independent integral and the stress intensity factor of the notch is found. The influence of loads on the related integral is also presented.     

Reactive carbon black having isocyanate or acyl azide group

Summary Introduction of isocyanate (NCO) group onto carbon black surface was achieved by the treatment of carbon black with toluene-2,4-diisocyanate. In addition, carbon black having acyl azide (CON₃) group, a precursor of NCO group, was prepared by the reaction of COCl or COOCOOC₂H₅ group on carbon black with NaN₃. The CON₃ group on carbon black was relatively stable at below 20°C but readily decomposed to NCO group by heating (Curtius rearrangement). By the reation of NCO group on carbon black with hydroxyl group of polymers, such as polypropylene glycol, polyethylene glycol, and polyvinyl alcohol, these polymers were found to be grafted onto carbon black.