Efficient computation of time-varying and adaptive filters

Two techniques for efficient computation of filters that support time-varying coefficients are developed. These methods are forms of distributed arithmetic that encode the data, rather than the filter coefficients. The first approach efficiently computes scalar-vector products, with which a digital filter is easily implemented in a transpose-form structure. This method, based on digital coding, supports time-varying coefficients with no additional overhead. Alternatively, distributed-arithmetic schemes that encode the data stream in sliding blocks support efficient direct-form filter computation with time-varying coefficients. A combination of both of these techniques greatly reduces the computation required to implement LMS adaptive filters     

The low process yield of some PNP power transistors

A study is presented of the symptoms of the devices in a slice of PNP power transistors with a poor yield. The failure modes over the slice are analysed. In specific areas the electrical characteristics and optical appearance of the devices were studied and failure statistics are presented. The low yield is ascribed to cracks in the phosphosilicate glass used for the base diffusion. The effect of these cracks is just visible in the optical and scanning electron microscope.     

Thermomechanical behaviour of composites

This paper derives the governing equations for the thermomechanical behaviour of composites. When the basic equations for the thermoelastic behaviour of solids were first derived in the nineteenth century several approximations were made. The effect of these assumptions are discussed and illustrated by the results of a simple laboratory test. The implications of this work on the analysis of impact damaged laminates are then discussed.     

A distributed adverse drug reaction detection system using intelligent agents with a fuzzy recognition‐primed decision model

Discovering unknown adverse drug reactions (ADRs) in postmarketing surveillance as early as possible is highly desirable. Nevertheless, current postmarketing surveillance methods largely rely on spontaneous reports that suffer from serious underreporting, latency, and inconsistent reporting. Thus these methods are not ideal for rapidly identifying rare ADRs. The multiagent systems paradigm is an emerging and effective approach to tackling distributed problems, especially when data sources and knowledge are geographically located in different places and coordination and collaboration are necessary for decision making. In this article, we propose an active, multiagent framework for early detection of ADRs by utilizing electronic patient data distributed across many different sources and locations. In this framework, intelligent agents assist a team of experts based on the well‐known human decision‐making model called Recognition‐Primed Decision (RPD). We generalize the RPD model to a fuzzy RPD model and utilize fuzzy logic technology to not only represent, interpret, and compute imprecise and subjective cues that are commonly encountered in the ADR problem but also to retrieve prior experiences by evaluating the extent of matching between the current situation and a past experience. We describe our preliminary multiagent system design and illustrate its potential benefits for assisting expert teams in early detection of previously unknown ADRs. © 2007 Wiley Periodicals, Inc. Int J Int Syst 22: 827–845, 2007.     

Contracting, prompting, and reinforcing substance use disorder continuing care: A randomized clinical trial.

Although continuing care is strongly related to positive treatment outcomes for substance use disorder (SUD), participation rates are low and few effective interventions are available. In a randomized clinical trial with 150 participants (97% men), 75 graduates of a residential Veterans Affairs Medical Center SUD program who received an aftercare contract, attendance prompts, and reinforcers (CPR) were compared to 75 graduates who received standard treatment (STX). Among CPR participants, 55% completed at least 3 months of aftercare, compared to 36% in STX. Similarly, CPR participants remained in treatment longer than those in STX (5.5 vs. 4.4 months). Additionally, CPR participants were more likely to be abstinent compared to STX (57% vs. 37%) after 1 year. The CPR intervention offers a practical means to improve adherence among individuals in SUD treatment. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Ab<Emphasis Type="Italic"> initio</Emphasis> investigation of boron diffusion paths in germanium

Boron is observed to diffuse very slowly in germanium, as opposed to its behaviour in silicon where it exhibits Transient Enhanced Diffusion effects in implanted samples. As a result of this slow diffusion, boron is a very stable dopant, allowing devices to be created with very well-defined doping regions. To understand this superior performance, calculations were performed on a variety of boron diffusion paths, within vacancy and interstitial mediated methods. It was found that the vacancy mediated diffusion which is associated with the fast diffusion of many other species in germanium exhibits a total barrier of 5.8 eV. Interstitial-mediated diffusion had a total barrier for migration of 3.4 eV in the neutral and singly negative charge states, 3.2 eV for the positive charge state, but a formation barrier of 4.1 eV. Thus the barrier for interstitial-mediated diffusion is dominated by the formation energy of the self-interstitial.     

Emission of trace toxic metals during pulverized fuel combustion of Czech coals

A study of the trace elements emission (As, Se, Cd, Co, Cr, Cu, Zn, Hg, Tl, Pb, Ni, Sn, Sb, V, Mn and Fe) from pulverized coal combustion has been made at six heating and power stations situated in the Czech Republic. The amount of chlorine in coal has considerable influence on volatilization of some elements such as Zn, Cu, Pb, Hg and Tl, which is explained by the formation of thermodynamically stable compounds of these elements with chlorine. Generally, the affinities for Cl follows the order Tl > Cu > Zn > Pb > Co > Mn > Sn > Hg. The experimental data indicates enrichment of some of the trace toxic elements in the emissions (Cu, Zn, As, Se, Cd, Sn, Sb, Hg and Pb) and good agreement was obtained by thermodynamic equilibrium calculations with a few exceptions. In the case of Fe, Mn, Co, Cr and Sn calculated values are overestimated in the bottom ash and there are zero predicted amounts of these elements in the fly ash. In comparison, the results from experiments show up to 80% of these elements retained in fly ash. This implies that there exist additional steps leading to the enrichment by Fe, Mn, Co, Cr and Sn of small particles. Such mechanisms could include the ejection during devolatilization of small inorganic particles from the coal of bottom ash particles, or disintegration of the char containing these metals to small particles of fly ash. On the other hand, there are slightly overestimated or similar values of relative enrichment factors for As, V, Cu, Cd, Sb, Tl and Pb in the fly ashes and zero predicted values for bottom ashes. Our experimental results show about 5% or less of these elements are retained in bottom ashes, so they probably remain in the bottom ash inside unburned parts of coal. Copyright © 2003 John Wiley & Sons, Ltd.     

Intermediate order in tetrahedrally coordinated silicon: evidence for chainlike objects

In this report, we describe the nature of intermediate order in silicon as determined by recent measurements on thin films using transmission electron microscopy (TEM) and Raman scattering. The TEM images show in addition to the expected continuous random network (CRN), the presence of highly ordered quasi-one-dimensional “chain-like objects” (CLO's) that are 1–2 nm wide and tens of nm long that meander and show some evidence of cross-linking with each other. The presence of these objects correlate to a Raman feature centered at 490 cm⁻¹ whose width is 35–40 cm⁻¹, and is used to quantify the heterogeneity in terms of the CLO and CRN (=475 cm⁻¹ scattering) concentrations. The 490 and 35 cm⁻¹ values are consistent with bond angle deviations approaching 0°, and thus reinforces an association with the CLOs. We find that in reference quality a-Si:H (made using pure SiH₄), the CLO concentration is about 5 vol%, while in state-of-the-art material using high H₂ levels of dilution during processing, it increases to about 15%. Increased stability of such material to light-soaking is thus not mediated by a direct volumetric replacement of poor with high-quality components. Rather, an important characteristic of intermediate order in silicon is the low-dimensional aspect of its order, which allows it to influence more total volume than which it is itself composed. Consistent with these and other recent findings, we propose a tensegrity model of amorphous silicon.