Power Supply at Metallurgical Iron-and-Steel Works: Features and Development Prospects

Metallurgist - The article provides a brief assessment of the current state of power supply units at metallurgical plants and prospects for their future development. The principal power-supply...     

Remelting of Iron Shavings with the Synergistic Effect of Minimum Metal Loss

Metallurgist - The well-known technologies of remelting iron shavings lead to significant (30%) losses of metal. An electroslag smelting furnace with graphite electrodes is proposed for remelting...     

Combustion in Ni–Al System with Cu Additive (Powder or Rod). Experiment and Mathematical Model

Russian Journal of Non-Ferrous Metals - Experimental studies have been carried out with theoretical calculations of wave synthesis in the Ni–Al–Cu system using a mathematical model....     

Microdistortions,Hardness, and Young’s Modulus of Multicomponent Bcc Solid Solutions

Powder Metallurgy and Metal Ceramics - The phase composition, type II microstresses, and coherent scattering domains (CSDs) of multicomponent (medium- and high-entropy) bcc solid solutions with an...     

The Influence of Hydrogen Concentration in an Ar–H2 Mixture on the Electrical Properties of Solid Oxide Fuel Cells

Powder Metallurgy and Metal Ceramics - Fuel cells are today among the most efficient and environmentally friendly devices for the production of electricity. They are developing rapidly and are...     

Hydrocarbon stress response of four tropical plants in weathered crude oil contaminated soil in microcosms

Responses to hydrocarbon stress of four tropical plants Panicum maximum, Zea mays, Centrosema sp. and Pueraria sp. grown in crude oil contaminated soils (1%, 5% and 10% w/w) were evaluated in a green house. Plants’ percentage survival, shoot heights, biomass development, and phytotoxicity susceptibility were used as indicators of growth, stress response and hydrocarbon tolerance. Relative to control, shoot heights and biomass of plants reduced with increasing hydrocarbon concentration, but 1% w/w oil-in-soil, stimulated shoot heights (5.9% and 6.4%) and weights (21.9% and 2.3%) in P. maximum and Centrosema sp. respectively. P. maximum tolerated the contaminant stress with biomass yields of 113% and 57% of control respectively in 1% and 10% w/w oil-in-soil. All the plants had 100% survival in 1% w/w, but considerably reduced survival in 10% w/w oil-in-soil. These results show that P. maximum has great potential for phytoremediation of petroleum contaminated soil.     

Cobalt powdersintering industry (stone cutting diamond wheels): a study of environmental-biological monitoring, workplace improvement and health surveillance

This communication deals with an aspect of occupational hygiene in a factory producing granite cutting diamond wheels by sintering, in moulds, of fine cobalt powder. The factory has been studied between 1988 and 1991; the Department of Preventive and Occupational Medicine of the Local Sanitary Unit of Reggio Emilia has followed the evolution of the local exhaust ventilation equipment supplied by the employer in that period. At the same time, the following measurements and observations were carried out: (a) cobalt exposure by personal sampling, (b) airborne cobalt measurements by area sampling, (c) biological monitoring of cobalt in urine, (d) health surveillance.     

Optimization of Technological Regulation of Container Glass Production: Best Available Technologies,General Binding Rules,and Carbon Intensity of Products

Glass and Ceramics - A system for technological regulation of adverse environmental impacts (AEI) that is based on the best available technologies (BAT) was analyzed. The expediency of updating the...     

Rapid Bonding of Ti3SiC2 and Ti3AlC2 by Pulsed Electrical Current Heating

Inspired by pressure resistance welding of metallic materials, herein we describe how two MAX phases—Ti₃SiC₂ and Ti₃AlC₂—were successfully joined by a rapid electric current heating method in a pulsed electric current sintering furnace. No welding agent was employed and the total processing time was less than 6 min. When the bulk temperature of the joint couple exceeded 1070°C, good joints, with shear strength above 50 MPa, were achieved in both homo‐ and heterojunction joints.     

Improved electro-assisted removal of phosphates and nitrates using mesoporous carbon aerogels with controlled porosity

Three-activated carbon aerogels were synthesized by CO₂ activation of the materials prepared by the polycondensation of resorcinol and formaldehyde mixtures followed by supercritical drying. The obtained carbon aerogels were characterized and used as electrode materials for the electrosorption of sodium phosphate and nitrate. X-ray diffraction and Raman spectroscopy showed the dependence of the structural ordering of the aerogels with the resorcinol/catalyst ratio and the extent of activation. The electrosorption capacitance evaluated by cyclic voltammetry revealed large values for the activated samples containing a large contribution of mesopores, regardless the electrolyte salt. Due to an adequate combination of chemical and porous features, the desalting capacity of the activated carbon aerogel electrodes exceeded that of the as-prepared materials. The evaluation of the kinetic properties by chronocoulometric relaxation and impedance spectroscopy showed a decrease of time constant and resistances for highly mesoporous activated samples. A high deionization capacity and fast electrode discharge was detected for the deionization of sodium nitrate on the highly mesoporous activated aerogel. Data also showed the efficient electrosorption of ionic species on consecutive charge/discharge cycles, confirming the stability of the aerogel electrodes at the high applied potentials.