Fabrication and characteristics of tapes and test magnets made from Ag-Clad Bi-2223 superconductors

Pb_0.4Bi_1.8Sr₂Ca_2.2Cu₃O_x (Bi-2223) precursor powder was prepared by a solid-state reaction of carbonates and oxides of lead, bismuth, strontium, calcium, and copper, and the powder was then used to fabricate silver-clad tapes by the powder-in-tube technique. Transport critical current density (J_c) values>4×10⁴ A/cm² at 77K and 2×10⁵ A/cm² at 4.2 and 27K have been achieved in short tape samples. Long lengths of tape were tested by winding them into pancake coils. Recently, we fabricated a test magnet by stacking ten pancake coils, each containing three 16m lengths of rolled tape, and tested it at 4.2, 27 and 77K. A maximum generated field of 2.6 T was measured in zero applied field at 4.2K and the test magnet generated significant self-field in background fields up to 20 T. The results are discussed in this paper.     

A 20-Gb/s silicon bipolar 1:4-demultiplexer IC

This paper presents a 20-Gb/s 1:4-demultiplexer for future fiber-optic transmission systems. It uses an 0.4-μm emitter double polysilicon 21-GHz f_T Si bipolar foundry process. This is the highest data rate of a 1:4-DEMUX reported so far in any technology. The 1:4-DEMUX features a tree-type architecture with one frequency divider and a channel switch circuit. The circuit design was carefully optimized to achieve high speed and moderate power dissipation. It consumes 1.4 W with a single -4.5-V supply     

High-power passively mode-locked semiconductor lasers

We have developed optically pumped passively mode-locked vertical-external-cavity surface-emitting lasers. We achieved as much as 950 mW of mode-locked average power in chirped 15-ps pulses, or 530 mW in 3.9-ps pulses with moderate chirp. Both lasers operate at a repetition rate of 6 GHz and have a diffraction-limited output beam near 950 nm. In continuous-wave operation, we demonstrate an average output power as high as 2.2 W. Device designs with a low thermal impedance and a smooth gain spectrum are the key to such performance. We discuss design and fabrication of the gain structures and, particularly, their thermal properties     

Cure monitoring of thermoset coatings

The combination of favorable features of tensile mode dynamic mechanical analysis and torsional braid analysis leads to a useful method for cure monitoring of thermoset coatings. This sensitive technique allows the observation of cure reactions over a wide time and temperature range, thus including gelation and long-term curing in one measurement. Isothermal baking can be simulated realistically, since evaporation of volatile compounds like solvents or blocking agents is not hindered and the sample film is in direct contact with the heating atmosphere. Examples are given showing the cure behavior of automotive clear coats and electro coats depending on parameters like crosslinker type and catalytic agents.     

Impaired motor cortex inhibition in patients with amyotrophic lateral sclerosis. Evidence from paired transcranial magnetic stimulation

We investigated 14 patients with amyotrophic lateral sclerosis (ALS) by paired conditioning-test transcranial magnetic stimulation to test the hypothesis that the motor cortex is hyperexcitable in ALS. Intracortical (corticocortical) inhibition was significantly less in the ALS group than in an age-matched healthy control group (85.3 +/- 27.0% versus 45.2 +/- 15.5%, respectively; p < 0.0001). In contrast, intracortical facilitation, motor threshold, and cortical silent period duration in the ALS patients were not different from the control group. We suggest that the selective abnormality of intracortical inhibition is best compatible with an impaired function of inhibitory interneuronal circuits in the motor cortex that in turn renders the corticomotoneuron hyperexcitable.     

Hypereosinophilic syndrome in a child mosaic for a congenital triplication of the short arm of chromosome 8

Fibroblast growth factors are important heparin binding, mitogenic proteins. The binding site in heparin and heparan sulfate for fibroblast growth factor-2 (basic fibroblast growth factor) has been described as rich in glucosamine-2-sulfate 1-->4 linked to iduronic acid-2-sulfate. The glucosamine residue in the heparin binding site is also 6-sulfated. A new glycosaminoglycan, acharan sulfate, has been chemically modified to prepare a polysaccharide, N-sulfoacharan sulfate, consisting of glucosamine-2-sulfate 1-->4 linked to iduronic acid-2-sulfate. Acharan sulfate binds very weakly to fibroblast growth factor-2 while N-sulfoacharan sulfate binds with nearly the same affinity as heparin. Mitogenicity studies were performed using heparan sulfate-free cells stably transfected with fibroblast growth factor receptor-1. Acharan sulfate inhibits heparin's enhancement of fibroblast growth factor-2 mitogenic activity, without affecting cell viability, while N-sulfoacharan sulfate shows heparin-like activity but at a greatly reduced level. These results suggest additional mechanisms not requiring high affinity glycosaminoglycan binding to fibroblast growth factor-2 may be important in its mitogenic activity.