Nanoporous activated carbon cloth for capacitive deionization of aqueous solution

Activated nanostructured-carbon cloths with a high ratio of surface area to volume are used as electrode for capacitive deionization. The electrochemical properties on capacitive deionization for NaCl solution have been investigated to improve efficiency of capacitive deionization properties from aqueous solution, employing chemical surface-modification by etching in alkaline and acidic solution. The removal efficiency of inorganic salts of activated carbon cloths by chemical modification significantly increased. Specially the carbon cloth surface modified in HNO₃ showed an effect of improvement in the CDI efficiency due to not only ion adsorption by an electric double layer, but also electron transfer by Faradaic reaction.     

Study on Contamination Control for Yield Enhancement in the Manufacturing Line of Cellular Phone Modules

Practical studies on the method of contamination control for yield enhancement in the cellular phone modules production line were carried out. A contamination control method was proposed, consisting of data collection, data analysis, improvement action, verification, and implementation of control. The partition check method and the composition analysis for data collection and data analysis were respectively used in the cellular phone modules manufacturing process, and these methods were evaluated by the variation of yield loss before and after implementing the actions for improvement. In the partition check method, the critical process step was selected, and yield loss reduction through improvement actions was observed, whereas in the composition analysis, critical sources were selected, and yield loss reduction through improvement actions was investigated. From the results, it is concluded that the partition check and the composition analysis are effective solutions for contamination control in cleanroom production lines.     

Zero-valent iron treatment of RDX-containing and perchlorate-containing wastewaters from an ammunition-manufacturing plant at elevated temperatures.

The use of zero-valent iron for treating wastewaters containing RDX and perchlorate from an army ammunition plant (AAP) in the USA at elevated temperatures and moderately elevated temperature with chemical addition was evaluated through batch and column experiments. RDX in the wastewater was completely removed in an iron column after 6.4 minutes. Increasing the temperature to 75 degrees C decreased the required retention time to 2.1 minutes for complete RDX removal. Perchlorate in the wastewater was completely removed by iron at an elevated temperature of 150 degrees C in batch reactors in 6 hours without pH control. Significant reduction of perchlorate by zero-valent iron was also achieved at a more moderate temperature (75 degrees C) through use of a 0.2 M acetate buffer. Based on the evaluation results, we propose two innovative processes for treating RDX-containing and perchlorate-containing wastewaters: a temperature and pressure-controlled batch iron reactor and subsequent oxidation by existing industrial wastewater treatment plant; and reduction by consecutive iron columns with heating and acid addition capabilities and subsequent oxidation.     

Friction and wear of Inconel 690 and Inconel 600 for steam generator tube in room temperature water

In the steam generators of nuclear power plants, the flow of cooling water can cause the tubes to vibrate, resulting in fretting wear damage due to contacts between these tubes and their supports. The tubes are made of Inconel 690 and Inconel 600 and the supports are made of STS 304. In this paper, fretting wear tests in water were performed using the materials Inconel 690 and Inconel 600 in contact with STS 304. Fretting tests using a cross-cylinder type set up were conducted under various vibrating amplitudes and applied normal loads in order to measure friction forces and wear volumes. Also, conventional sliding tests using a pin-on-disk type set up were carried out to compare these test results.In the fretting tests, friction force was found to be strongly dependent on normal load and vibrating amplitude. Coefficients of friction decreased with an increase in the normal load and a decrease in the vibrating amplitude applied. Also, the wear of Inconel 600 and Inconel 690 was predicted using a work rate model. Depending on the normal load and vibrating amplitude applied, distinctively different wear mechanisms and often drastically different wear rates occurred. It was found that the fretting wear coefficients for Inconel 600 and Inconel 690 were 9.3×10⁻¹⁵ and 16.2×10⁻¹⁵ Pa⁻¹, respectively. This study shows that Inconel 690 can result in lesser friction forces and exhibits less wear resistance than Inconel 600 in room temperature water.     

Improved strained HEMT characteristics using double-heterojunctionIn0.65Ga0.35As/In0.52Al0.48As design

The DC and microwave properties of strained In_0.65Ga _0.35As/In₀₅₂Al_0.48As HEMTs (high electron-mobility transistors) with double-heterojunction design are presented. The high sheet carrier density and good carrier confinement give rise to excellent device performance with very low output conductance. For 1×150-μm² long-gate HEMTs, the measured cutoff frequency f_T and maximum frequency of oscillation f_max are as high as 37 and 66 GHz, respectively     

Simulation of polarization converter formed by poling-inducedpolymer waveguides

A polarization converter using electrooptic (EO) polymer waveguides is proposed and it is simulated by a full vectorial beam propagation method (VBPM) for anisotropic medium. First, an efficient structure of poling electrodes is proposed for the fabrication of TE-mode poling-induced waveguides in EO polymer. For given electrode structures of both TE-mode and TM-mode waveguides, poling-induced dielectric tensors are calculated by the finite-element method to provide refractive index distribution, data for VBPM simulation. It is shown numerically that the poled TE and TM mode waveguides work efficiently as the corresponding polarization filters. Then, new poling electrodes are suggested to fabricate a waveguide device formed by connecting the TE and TM mode waveguides adiabatically with a slowly varying structure. This waveguide device has the optic axis slowly rotating as one moves along the propagation direction, so that it will act as polarization converter. VBPM simulation shows that the polarization of the guided mode rotates following the optic axis distribution. Polarization conversion is demonstrated successfully with high conversion efficiency and low excess loss     

Semilinear Duhem model for rate-independent and rate-dependent hysteresis

The classical Duhem model provides a finite-dimensional differential model of hysteresis. In this paper, we consider rate-independent and rate-dependent semilinear Duhem models with provable properties. The vector field is given by the product of a function of the input rate and linear dynamics. If the input rate function is positively homogeneous, then the resulting input-output map of the model is rate independent, yielding persistent nontrivial input-output closed curve (that is, hysteresis) at arbitrarily low input frequency. If the input rate function is not positively homogeneous, the input-output map is rate dependent and can be approximated by a rate-independent model for low frequency inputs. Sufficient conditions for convergence to a limiting input-output map are developed for rate-independent and rate-dependent models. Finally, the reversal behavior and orientation of the rate-independent model are discussed.     

Cardio-pulmonary function during acute unilateral occlusion of the pulmonary artery in broilers fed diets containing normal or high levels of arginine-HCl

Cardio-pulmonary function was measured in male broilers reared on diets formulated to contain 1.5% arginine (NORMAL group) or 2.5% arginine (ARGININE group). A snare placed around the right pulmonary artery permitted acute shunting of the entire cardiac output (CO) through the left pulmonary artery, resulting in sustained increases in blood flow (BF) through the left lung in both groups. The unilateral increase in BF was accompanied by sustained increases in pulmonary arterial pressure (PAP) and pulmonary vascular resistance (PVR) in the NORMAL group. However, following initial transient increases in PAP and PVR in the ARGININE group, subsequent pulmonary vasodilation gradually reduced PVR, and thus PAP, in spite of the ongoing elevation of BF through the left lung. The capacity of the pulmonary vasculature in the ARGININE group to accommodate an increased BF at a normal PAP accounts for the previously reported lower incidence of pulmonary hypertension syndrome (PHS, ascites) in cold-stressed broilers fed supplemental dietary arginine. Hypoxemia and respiratory acidosis ensued rapidly in both groups after tightening the pulmonary artery snare, in spite of a compensatory increase in the respiratory rate. The gradual return of PVR and PAP to presnare levels in the ARGININE group did not eliminate the concurrent ventilation-perfusion mismatch caused by the increased rate of BF through the left lung. Tightening the pulmonary artery snare caused mean systemic arterial pressure (MAP) to drop from control levels of approximately 98 mm Hg to sustained hypotensive levels of approximately 65 mm Hg in both groups. This systemic hypotension was caused by decreases in CO and total peripheral resistance (TPR). The reduction in CO were caused by reduction in stroke volume (SV) rather than heart rate (HR), suggesting that acutely tightening the pulmonary artery snare increased PVR sufficiently to impede left ventricular filling. Accordingly, the maximum increment in PAP attainable by the right ventricle during acute increases in PVR apparently was inadequate to propel the entire CO through the pulmonary vasculature, setting the stage for the congestive right-sided pooling of blood routinely associated with PHS in broilers.     

Microstructure investigations of ball milled materials

HREM and FEG TEM were emphasized and extensively used to follow the most subtle changes in the structure and composition of ball-milled Cu, Fe-Cu, and thermally decomposed Fe60Cu40. Some significant results are obtained and summarized as follows: HREM shows that the deformation of ball-milled copper proceeds mainly by twinning and shear bands (SBs) formation. The nano-grains formed during ball milling (BM) contain a high density of dislocations. The grain boundaries (GBs) of nanocrystalline (NC) Cu prepared by BM are ordered, curved, and strained, but disordering, lattice distortion, and nanovoids in local regions were frequently observed. Nanoscale composition analysis on mechanically alloyed Fe16Cu84 shows that the average Fe content in both the interior of grains and the GBs is close to the designed composition, which proves that a supersaturated solid solution has really formed. However, the Fe content is rather inhomogeneous between the larger and smaller grains, which infers the inhomogeneous mixing of Fe and Cu during mechanical alloying (MA). NC structure and the mechanical force-enhanced fast diffusion are the reasons of the formation of supersaturated solid solutions in immiscible systems with positive enthalpy of mixing. HREM observations carried out with the thermally decomposed Fe60Cu40 solid solution show that the Nishiyama (N-W) or Kurdyumov-Sachs (K-S) orientation relationships exist between alpha-Fe and Cu. Energy dispersive X-ray spectra (EDXS) results show that the Cu content in these alpha-Fe grains reaches as high as 9.5 at.% even after heating to 1,400 degrees C, which is even higher than the maximum solubility of Cu in gamma-Fe at 1,094 degrees C.     

Double blind, randomised, placebo controlled study of oral vancomycin in prevention of necrotising enterocolitis in preterm, very low birthweight infants

AIMS: To evaluate the effectiveness of oral vancomycin in the prophylaxis of necrotising enterocolitis in preterm, very low birthweight infants. METHODS: A prospective, double blind, randomised, placebo controlled study in a tertiary referral centre of a university teaching hospital was conducted on 140 very low birthweight infants consecutively admitted to the neonatal unit. The babies were randomly allocated to receive oral vancomycin (15 mg/kg every 8 hours for 7 days) or an equivalent volume of placebo solution. Prophylaxis was started 24 hours before the start of oral feeds. All suspected cases of necrotising enterocolitis were investigated with a full sepsis screen and serial abdominal radiographs. Necrotising enterocolitis was diagnosed and staged according to modified Bell's criteria. RESULTS: Nine of 71 infants receiving oral vancomycin and 19 of 69 infants receiving the placebo solution developed necrotising enterocolitis (p = 0.035). Infants with necrotising enterocolitis were associated with a significant increase in mortality (p = 0.026) and longer duration of hospital stay (p = 0.002). CONCLUSIONS: Prophylactic oral vancomycin conferred protection against necrotising enterocolitis in preterm, very low birthweight infants and was associated with a 50% reduction in the incidence. However, widespread implementation of this preventive measure is not recommended, as it would only be effective in necrotising enterocolitis caused by Gram positive organisms and could increase the danger of the emergence of vancomycin resistant or dependent organisms. Its use should be restricted to a high prevalence nursery for a short and well defined period in a selected group of high risk patients.