Zeolite‐catalyzed isomerization of oleic acid to branched‐chain isomers

Branched‐chain (bc) saturated fatty acids (SFA) have potential as oleochemical intermediates since they have better oxidative stability than linear unsaturated fatty acids (UFA) and have better low‐temperature properties than linear SFA. Previous studies in converting UFA to bc‐FA using clay catalysts have resulted in only modest yields and conversions. Recent reports, however, have suggested that certain zeolites can be effective catalysts for converting UFA to bc‐FA in higher yields and conversions. In this work, we examined the scope and potential of the zeolite‐catalyzed synthesis of bc‐FA starting from readily available monounsaturated linear FA. Our results show that common UFA such as oleic acid can be converted to bc‐isomers using modified Ferrierite zeolite catalysts with high conversions (98%) and high selectivity (85%) and that the zeolite catalysts are reusable for at least three cycles. The positions of branching (methyl) on the FA chain were determined from the GC‐MS spectra of the picolinyl esters of the bc‐FA.     

Preparation of poly(ethylene terephthalate) nanocomposite fibers incorporating a thermally stable organoclay

Summary A series of poly(ethylene terephthalate) (PET) nanocomposites containing organically-modified mica (HB-Mica) were prepared by in-situ interlayer polymerization of dimethyl terephthalate and ethylene glycol. The PET nanocomposites, which contained organoclay loadings of 0 to 2 wt %, were melt-spun to produce monofilaments with various draw ratios. Some of the clay particles appeared well dispersed within the PET matrix, while others were found to form agglomerates with sizes greater than 20 nm. The addition of a small amount of organoclay was sufficient to improve the thermo-mechanical properties of the PET hybrid fibers. Both the thermal stability and the mechanical tensile properties increased with increasing clay content for draw ratios of 1–16.     

Structure–property relationship of modified polypropylene–polycaproamide fiber

The effect of the addition of polyamide on the structure and properties of polypropylene fiber has been studied. Although a good fiber is obtained with a composition containing only a very low concentration of polycaproamide in polypropylene, the increase in polyamide content decreases the drawing strength of the mixed polymer melt due to sudden lowering of melt viscosity and strength. The poor melt strength of the studied polymer mixture is attributed to increased heterogeneity induced in the system with increased concentration of polyamide. Use of an effective interphase modifier, maleic anhydride-grafted polypropylene, however, was found to improve fiber properties of the studied polymer mixtures even with a very high concentration of polyamide as the dispersed phase. Thus, addition of a 1–4 wt % interphase modifier facilitates the formation of good fiber even with 30 wt % polycaproamide in the blend. This improvement is attributed to the improved dispersity of polyamide in the polypropylene matrix as well as improved phase compatibility due to the formation of a chemically modified polyamide during melt extrusion in the presence of maleic anhydride-grafted polypropylene.     

Synthesis of hyperbranched P poly(glycerol-diacid) oligomers

Novel oligomeric prepolymers were synthesized by acid-catalyzed condensation of glycerol with iminodiacetic, azelaic, or succinic acid. The prepolymers were obtained, on average, in 62% yield and were characterized by ¹³C NMR, ¹H NMR, matrix-assisted laser desorption ionization-time of flight-mass spectrometry, and gel permeation chromatography. The synthesized oligomers had an average M.W. of 1543 Daltons (average polydispersity (PD)=1.34, average degree of polymerization (DOP)=5.5). Hyperbranching was evident in the oligomers produced when using azelaic acid and succinic acid as co-monomers with glycerol, whereas the reaction between iminodiacetic acid and glycerol resulted in linear products bearing cyclic urethane structures.     

基于IOS平台的小型仓储管理系统设计

随着数字化、信息化技术在物流领域应用的飞速发展,各种各样的仓储管理系统日益受到关注。本文介绍的基于IOS平台的小型仓储管理系统是利用IOS设备对货物信息进行采集,通过SQLite数据库技术、ZXing库等软硬件方式构建的业务系统,可以较好地适应中小规模用户数据交互的需求。同时,系统具备造价低廉、操作便捷等优点。     

Eicosapentaenoic acid (20∶5n-3) from the marine microalgaPhaeodactylum tricornutum

Eicosapentaenoic acid (EPA, 20∶5n-3) was obtained from the marine microalgaePhaeodactylum tricornutum by a three-step process: fatty acid extraction by direct saponification of biomass, polyunsaturated fatty acid (PUFA) concentration by formation of urea inclusion compounds, and EPA isolation by semipreparative high-performance liquid chromatography (HPLC). Alternatively, EPA was obtained by a similar two-step process without the PUFA concentration step by the urea method. Direct saponification of biomass was carried out with two solvents that contained KOH for lipid saponification. An increase in yield was obtained because the problems associated with emulsion formation were avoided by separating the biomass from the soap solution before adding hexane for extraction of insaponifiables. The most efficient solvent, ethanol (96%) at 60°C for 1 h, extracted 98.3% of EPA. PUFA were concentrated by the urea method with a urea/fatty acid ratio of 4∶1 at a crystallization temperature of 28°C and by using methanol and ethanol as urea solvents. An EPA concentration ratio of 1.73 (55.2∶31.9) and a recover yield of 78.6% were obtained with methanol as the urea solvent. This PUFA concentrate was used to obtain 93.4% pure EPA by semipreparative HPLC with a reverse-phase, C₁₈, 10 mm i.d.×25-cm column and methanol/water (1% acetic acid), 80∶20 w/w, as the mobile phase. Eighty-five percent of EPA loaded was recovered, and 65.7% of EPA present inP. tricornutum biomass was recovered in highly pure form by this three-step downstream process. Alternatively, 93.6% pure EPA was isolated from the fatty acid extract (without the PUFA concentration step) with 100% EPA recovery yield. This two-step process increases the overall EPA yield to 98.3%, but it is only possible to obtain 20% as much EPA as that obtained by three-step downstream processing.     

Effects of allelochemicals on plant respiration and oxygen isotope fractionation by the alternative oxidase

The goal of this investigation was to determine the effects of allelochemicals on plant respiration that thereby may be responsible for their role in growth inhibition. We have tested the effects of juglone, quercetin, cinnamic acid, and-pinene on respiration rates, and electron partitioning through the cytochrome and alternative respiratory pathways, by measuring on-line oxygen consumption and oxygen isotope fractionation in soybean cotyledon tissue. Cinnamic acid and-pinene decreased the oxygen consumption rate and increased the relative partitioning of electron transport to the alternative pathway. Possible biochemical mechanisms of these effects are discussed.     

Silica Gel- and MCM-41-Supported MoS2 Catalysts for HDS Reactions

MCM-41- and silica gel-supported MoS₂ catalysts were prepared. MCM-41 was synthesized and impregnated with precursor, then activated to obtain the active phase. The sol–gel method was used for providing the SiO₂ support as well as for including the catalyst precursors in one single step of preparation. Such catalysts have applications particularly in hydrodesulfurization (HDS) and hydrodenitrogenation (HDN) processes. A comparison of the activities of the catalysts was made. The catalytic activity results showed the method of preparation used in this study was successful in producing very efficient catalysts for the HDS of dibenzothiophene (DBT).A higher selectivity for direct C–S bond cleavage was observed for the MoS₂ catalyst supported on SiO₂ by the sol–gel method. X-ray diffraction studies showed that the catalysts were poorly crystallized with a very weak intensity of the (002) line of 2H-MoS₂.     

脱乙烷系统参数优化

吉化300kt/a乙烯装置脱乙烷系统采用德国Linde公司双塔双压前脱乙烷技术，自1996年开始以来，运行良好，通过工程技术人员近两年的探索实践，对其工艺参数做了较大的优化调整，取得了较好的经济效益。     

A novel cyclodextrin-derived tellurium compound with glutathione peroxidase activity

A novel dicyclodextrinyl ditelluride (2-TeCD) compound was devised as a functional mimic of the glutathione peroxidase (GPX) enzymes that normally remove hydroperoxides from the cell. The GPX activity of the mimic was found to be 46.7 U microM(-1), which is 46 times as active as Ebselen, a well-known GPX mimic. A detailed steady-state kinetic study was undertaken to probe the reason for the high catalytic efficiency of 2-TeCD. This high efficiency can be explained based on both the binding of the substrate to the cyclodextrin and the catalytic mechanism of 2-TeCD, which is different from that of diselenide compounds. 2-TeCD exhibits good water solubility and is chemically and biologically stable. The biological effect of 2-TeCD was evaluated by its ability to protect mitochondria from oxidative damage. 2-TeCD exhibited excellent antioxidant capacity in comparison with Ebselen.