Excitation energy-dependent nature of Raman scattering spectrum in GaInNAs/GaAs quantum well structures

The excitation energy-dependent nature of Raman scattering spectrum, vibration, electronic or both, has been studied using different excitation sources on as-grown and annealed n- and p-type modulation-doped Ga_1 − xIn_xN_yAs_1 − y/GaAs quantum well structures. The samples were grown by molecular beam technique with different N concentrations (y = 0%, 0.9%, 1.2%, 1.7%) at the same In concentration of 32%. Micro-Raman measurements have been carried out using 532 and 758 nm lines of diode lasers, and the 1064 nm line of the Nd-YAG laser has been used for Fourier transform-Raman scattering measurements. Raman scattering measurements with different excitation sources have revealed that the excitation energy is the decisive mechanism on the nature of the Raman scattering spectrum. When the excitation energy is close to the electronic band gap energy of any constituent semiconductor materials in the sample, electronic transition dominates the spectrum, leading to a very broad peak. In the condition that the excitation energy is much higher than the band gap energy, only vibrational modes contribute to the Raman scattering spectrum of the samples. Line shapes of the Raman scattering spectrum with the 785 and 1064 nm lines of lasers have been observed to be very broad peaks, whose absolute peak energy values are in good agreement with the ones obtained from photoluminescence measurements. On the other hand, Raman scattering spectrum with the 532 nm line has exhibited only vibrational modes. As a complementary tool of Raman scattering measurements with the excitation source of 532 nm, which shows weak vibrational transitions, attenuated total reflectance infrared spectroscopy has been also carried out. The results exhibited that the nature of the Raman scattering spectrum is strongly excitation energy-dependent, and with suitable excitation energy, electronic and/or vibrational transitions can be investigated.     

Synthesis of nitrogen incorporated diamond-like carbon thin films using microwave surface-wave plasma CVD

Nitrogenated diamond-like (DLC:N) carbon thin films have been deposited by microwave surface wave plasma chemical vapor deposition on silicon and quartz substrates, using argon gas, camphor dissolved in ethyl alcohol composition and nitrogen as plasma source. The deposited DLC:N films were characterized for their chemical, optical, structural and electrical properties through X-ray photoelectron spectroscopy, UV/VIS/NIR spectroscopy, Raman spectroscopy, atomic force microscope and current–voltage characteristics. Optical band gap decreased (2.7 to 2.4 eV) with increasing Ar gas flow rate. The photovoltaic measurements of DLC:N / p-Si structure show that the open-circuit voltage (V_oc) of 168.8 mV and a short-circuit current density (J_sc) of 8.4 μA/cm² under light illumination (AM 1.5 100 mW/cm²). The energy conversion efficiency and fill factor were found to be 3.4 × 10^{− 4}% and 0.238 respectively.     

A model for the transverse strain response of unidirectional ceramic matrix composites during tensile testing

A comprehensive micromechanical model relating the longitudinal stress and transverse strain of unidirectional fibre toughened ceramic matrix composites (CMCs) is presented. The model uses different cylindrical unit-cells to describe the composite throughout a tensile test and considers all relevant damage mechanisms. The proposed model takes into account the Poisson contraction of fibre and matrix, the relief of thermal residual stresses upon damage development, and the build-up of compressive radial stresses at the interface due to mismatch between fibre and matrix after debonding and sliding. Thus the modelled transverse strain response depends on a wide range of microstructural and micromechanical parameters. The approach is checked by comparing the experimentally observed and simulated response of a unidirectional SiC/CAS composite of which all constituent properties were determined experimentally. The agreement between experiment and theory is excellent.     

Synthesis at several length scales of zeolite A membranes using a continuous flow method

Zeolite A membranes were synthesized in the inner side of porous TiO₂ and α-Al₂O₃ tubular supports by a continuous method. The methodology was then used at several scales for preparing membranes on TiO₂ and α-Al₂O₃ supports with lengths of 6, 12 and 25 cm. Formation of an homogeneous zeolite film was confirmed by XRD and SEM in all supports. Single-gas permeation experiments (He, H₂, N₂ and n-C₃H₈) indicated that Knudsen diffusion was the predominant mechanism in both supports. All the synthesized membranes present high flux and moderate selectivity to water in water–ethanol mixtures.     

Fabrication of textured alumina by orienting template particles during electrophoretic deposition

(0 0 1)-Textured α-alumina has been processed by electrophoretic deposition (EPD) and templated grain growth. The mechanism of platelet template orientation during EPD was examined with respect to the impact of the electric field force, gravity and hydrodynamic force in two different deposition cells with vertically or horizontally positioned deposition electrodes. A sharp (0 0 1) ‘fibre texture’ was obtained after templated grain growth during sintering of a deposit formed from a stirred 5 vol% platelet containing suspension in a vertical deposition cell. The texture was characterized by means of the Lotgering factor, texture index and electron backscattering diffraction (EBSD).     

Using Circular Conduits in Ozone Injection

Dissolved oxygen is the amount of oxygen dissolved in water corresponding to an important water quality parameter in rivers, streams, and lakes. Hydraulic structures can increase dissolved oxygen levels by creating turbulent conditions where small air bubbles are carried into the bulk of the flow. A gated conduit is a hydraulic structure that can be used efficiently in aeration and oxygen transfer. The subatmospheric pressure between the upstream and downstream of the gate is the reason for the air injection. Ozone is an unstable gas comprised of three oxygen atoms, and it can be used for water treatment. Ozone is thermodynamically unstable and spontaneously reverts back into oxygen. Ozone has been widely accepted as an effective disinfectant and a chemical oxidant. In this study a series of experiments was conducted to determine the ozone injection performance of circular conduits. Results showed that circular conduits are very effective for ozone injection.     

Listening to Natural and Synthesized Speech while Driving: Effects on User Performance

The effects of message type (navigation, E-mail, news story), voice type (text-to-speech, natural human speech), and earcon cueing (present, absent) on message comprehension and driving performance were examined. Twenty-four licensed drivers (12 under 30, 12 over 65, both equally divided by gender) participated in the experiment. They drove the UMTRI driving simulator on a road consisting of straight sections and constant radius curves, thus yielding two levels of low driving-workload. In addition, as a control condition, data were collected while participants were parked. In all conditions, participants were presented with three types of messages. Each message was immediately followed by a series of questions to assess comprehension. Navigation messages were about 4 seconds long (about 9 words). E-mail messages were about 40 seconds long (about 100 words) and news messages were about 80 seconds long (about 225 words). For all message types, comprehension of text-to-speech messages, as determined by accuracy of response to questions, and by subjective ratings, was significantly worse than comprehension of natural speech (79 versus 83 percent correct answers; 7.7/10 versus 8.6/10 subjective rating). Driving workload did not affect comprehension. Interestingly, neither the speech used (synthesized or natural) nor the message type (navigation, E-mail, news) had a significant effect on basic driving performance measured by the standard deviations of lateral lane position and steering wheel angle.     

含氧化锆的氧化物系统计算相图研究与进展

氧化锆是一种重要的高性能陶瓷材料，由于其优良的力学和电学性能。在结构陶瓷和功能陶瓷两个都有着广泛的应用前景，本文在简述计算相图发展和原理的基础上，综述了近年来对含氧化锆系统计算相图的研究，总结了一些重要体系的研究结果，提出计算相图方法将对该系统材料的组分设计起重大的促进作用。     

Smart structures and their applications on active vibration control: Studies in the Department of Aerospace Engineering, METU

This work presents the theoretical and experimental studies conducted in Aerospace Engineering Department of Middle East Technical University on smart structures with particular attention given to the structural modelling characteristics and active suppression of in-vacuo vibrations. The smart structures considered in these analyses are finite and flat aluminium cantilever beam-like (called as smart beam) and plate-like (called as smart fin) structures with surface bonded lead–zirconate–titanate patches. Finite element models of smart beam and smart fin are obtained. Then the experimental studies regarding open loop behaviour of the structures are performed by using strain gauges and laser displacement sensor to determine the system models. Further studies are carried out to obtain H _∞ and μ-synthesis controllers which are intended to be used in the suppression of free and forced vibrations of the smart structures. It is observed that satisfactory attenuation levels are achieved and robust performance of the systems in the presence of uncertainties is ensured. In that respect a comparative study involving H _∞ and sliding mode controls is also conducted. Recently, the studies involving aerodynamic loading are also gathering pace.