Left ventricular deformation recovery from cine MRI using an incompressible model

This paper presents a method for 3-D deformation recovery of the left ventricular (LV) wall from anatomical cine magnetic resonance imaging (MRI). The method is based on a deformable model that is incompressible, a desired property since the myocardium has been shown to be nearly incompressible. The LV wall needs to be segmented in an initial frame after which the method automatically determines the deformation everywhere in the LV wall throughout the cardiac cycle. Two studies were conducted to validate the method. In the first study, the deformation recovered from a 3-D anatomical cine MRI of a healthy volunteer was compared against the manual segmentation of the LV wall and against the corresponding 3-D tagged cine MRI. The average volume agreement between the model and the manual segmentation had a false positive rate of 3%, false negative rate of 3%, and true positive rate of 93%. The average distance between the model and manually determined intersections of perpendicular tag planes was 1.6 mm (1.1 pixel). Another set of 3-D anatomical and tagged MRI scans was taken of the same volunteer four months later. The method was applied to the second set and the recovered deformation was very similar to the one obtained from the first set. In the second study, the method was applied to 3-D anatomical cine MRI scans of three patients with ventricular dyssynchrony and three age-matched healthy volunteers. The LV wall deformations recovered for the three normals agreed well and the recovered strains were similar to those reported by other researchers for normal subjects. Strains and displacements of the three patients were clearly smaller than those of the three normals indicating reduced cardiac function. The deformation recovered for the three normals and the three patients was validated against manual segmentation and corresponding tag cine MRI scans and the agreement was similar to that of the first validation study.     

Shock Wave—Boundary Layer Interaction in Forced Shock Oscillations

The flow in transonic diffusers as well as in supersonic air intakes becomes often unsteady due to shock wave boundary layer interaction. The oscillations may be induced by natural separation unsteadiness or may be forced by boundary conditions. Significant improvement of CFD tools, increase of computer resources as well as development of experimental methods have again.drawn the attention of researchers to this topic. To investigate the problem forced oscillations of transonic turbulent flow in asymmetric two-dimensional Laval nozzle were considered. A viscous, perfect gas flow, was numerically simulated using the Reynolds-averaged compressible Navier-Stokes solver SPARC, employing a two-equation, eddy viscosity, turbulence closure in the URANS approach.For time-dependent and stationary flow simulations, Mach numbers upstream of the shock between 1.2 and 1.4 were considered. Comparison of computed and experimental data for steady states generally gave acceptable agreement. In the case of forced oscilla     

Trap‐Assisted Recombination via Integer Charge Transfer States in Organic Bulk Heterojunction Photovoltaics

Organic photovoltaics are under intense development and significant focus has been placed on tuning the donor ionization potential and acceptor electron affinity to optimize open circuit voltage. Here, it is shown that for a series of regioregular‐poly(3‐hexylthiophene):fullerene bulk heterojunction (BHJ) organic photovoltaic devices with pinned electrodes, integer charge transfer states present in the dark and created as a consequence of Fermi level equilibrium at BHJ have a profound effect on open circuit voltage. The integer charge transfer state formation causes vacuum level misalignment that yields a roughly constant effective donor ionization potential to acceptor electron affinity energy difference at the donor–acceptor interface, even though there is a large variation in electron affinity for the fullerene series. The large variation in open circuit voltage for the corresponding device series instead is found to be a consequence of trap‐assisted recombination via integer charge transfer states. Based on the results, novel design rules for optimizing open circuit voltage and performance of organic bulk heterojunction solar cells are proposed.     

Chemical-Sensory Characteristics and Consumer Responses of Blackcurrant Juices Produced by Different Industrial Processes

Four blackcurrant juices were produced in industrial scale to study the impact of different processes on the sensory-chemical characteristics and hedonic responses of consumers. Two juices were produced without enzymatic treatment of berries with or without further clarification and filtration. The residue was re-pressed using an enzyme-aided processing method to yield the third juice. The forth juice was obtained by conventional enzymatic processing of berries. The enzyme-aided juices were more astringent and bitter than the non-enzymatic juices, mostly due to higher contents of phenolic compounds, lower contents of sugars, and lower pH and sugar/acid ratio. Higher degree of polymerisation and lower procyanidin/prodelphinidin ratio in proanthocyanidins also contributed to higher intensities of astringencies of the enzyme-aided juices. Overall, the non-enzyme-aided juices received higher ranking in flavour, the enzyme-aided juices in odour. Sweetness, roundness, berryness, and high-sugar content were positive drivers for liking, whereas astringency, bitterness and high content of phenolic compounds were negative drivers. High-pectin content masked the astringency and bitterness of the juices. Higher liking ratings correlated with the previous consumption of blackcurrants and higher age of consumers. Gender showed clear impact on consumer rating of the juices. Males liked more enzyme-aided juices than females and vice versa with the juices produced without the use of enzymes. The processes investigated by this study maybe optimised for commercial production of juices targeted for different consumer groups.     

Adult Exposure to Di-N-Butyl Phthalate (DBP) Induces Persistent Effects on Testicular Cell Markers and Testosterone Biosynthesis in Mice

Studies indicate that phthalates are endocrine disruptors affecting reproductive health. One of the most commonly used phthalates, di-n-butyl phthalate (DBP), has been linked with adverse reproductive health outcomes in men, but the mechanisms behind these effects are still poorly understood. Here, adult male mice were orally exposed to DBP (10 or 100 mg/kg/day) for five weeks, and the testis and adrenal glands were collected one week after the last dose, to examine more persistent effects. Quantification of testosterone, androstenedione, progesterone and corticosterone concentrations by liquid chromatography-mass spectrometry showed that testicular testosterone was significantly decreased in both DBP treatment groups, whereas the other steroids were not significantly altered. Western blot analysis of testis revealed that DBP exposure increased the levels of the steroidogenic enzymes CYP11A1, HSD3β2, and CYP17A1, the oxidative stress marker nitrotyrosine, and the luteinizing hormone receptor (LHR). The analysis further demonstrated increased levels of the germ cell marker DAZL, the Sertoli cell markers vimentin and SOX9, and the Leydig cell marker SULT1E1. Overall, the present work provides more mechanistic understanding of how adult DBP exposure can induce effects on the male reproductive system by affecting several key cells and proteins important for testosterone biosynthesis and spermatogenesis, and for the first time shows that these effects persist at least one week after the last dose. It also demonstrates impairment of testosterone biosynthesis at a lower dose than previously reported.     

Die Mikrokjeldahlbestimmung in Lebensmitteln

Ohne Zusammenfassung     

Supercooled Liquid Ga Stretchable Electronics

By controlling the properties of its medium, supercooled liquid Ga (SLGa) based stretchable remains stretchable at −22 °C, i.e., 52 °C below its thermodynamic melting point of Ga. Thus far, our oldest deposited SLGa circuit and film have remained liquids for 2 years at room temperature. The study investigates the crystallization of SLGa triggered by the surface energy of nucleation agents, temperature, circuit cross-section, and mechanical impact. Based on these parameters, a method is presented to integrate electronic components with SLGa circuits without compromising its supercooling effect. Further, the large stiffness variation induced by phase transition is demonstrated in different applications. For the desired stiffness variation, the crystallization rate can be controlled by varying the temperature and cross-section area. Finally, spray-printing an ink of microscale SLGa microscale particles can conformally pattern Ga on a rough surface, e.g., to fabricate a stretchable array of SLGa microelectrodes. A smart patch with stretchable SLGa electrode arrays records human electrocardiogram signals in cold water and does not stain the skin after use. Its low and stable impedance in water will enable novel applications in wearable electronics.