Beyond the fascination of online-games: Probing addictive behavior and depression in the world of online-gaming

This study examined problematic gaming behavior and depressive tendencies among people who play different types of online-games. Other game-related variables were investigated to determine if other differences between three game types could be established. Participants in the current research (n = 468) can be classified into three independent groups. Subjected users either solely played massive multiplayer online role-playing games (MMORPGs) or they preferred online-ego-shooters (OES) or real-time-strategy games (RTS). Results indicate that MMORPG users show more often problematic gaming behavior, depressive tendencies and lower self-esteem compared to users playing other online-games. MMORPG users reported to playing significantly more often in order to escape from real-life problems, which might be a valuable coping strategy but might also lead to problematic gaming behavior.     

Individual and combined effects of subclinical doses of deoxynivalenol and fumonisins in piglets

Scope: Deoxynivalenol (DON) and fumonisins (FB) are the most frequently encountered mycotoxins produced by Fusarium species and most commonly co‐occur in animal diets. These mycotoxins were studied for their toxicity in piglets on several parameters including plasma biochemistry, organ histopathology and immune response. Methods and results: Twenty‐four 5‐wk‐old animals were randomly assigned to four different groups, receiving separate diets for 5 wk, a control diet, a diet contaminated with either DON (3 mg/kg) or FB (6 mg/kg) or both toxins. At days 4 and 16 of the trial, the animals were subcutaneously immunized with ovalbumin to assess their specific immune response. The different diets did not affect animal performance and had minimal effect on hematological and biochemical blood parameters. By contrast, DON and FB induced histopathological lesions in the liver, the lungs and the kidneys of exposed animals. The liver was significantly more affected when the two mycotoxins were present simultaneously. The contaminated diets also altered the specific immune response upon vaccination as measured by reduced anti‐ovalbumin IgG level in the plasma and reduced lymphocyte proliferation upon antigenic stimulation. Because cytokines play a key role in immunity, the expression levels of IL‐8, IL‐1β, IL‐6 and macrophage inflammatory protein‐1β were measured by RT‐PCR at the end of the experiment. The expression of these four cytokines was significantly decreased in the spleen of piglets exposed to multi‐contaminated diet. Conclusion: Taken together, our data indicate that ingestion of multi‐contaminated diet induces greater histopathological lesions and higher immune suppression than ingestion of mono‐contaminated diets.     

Er+ medium energy ion implantation into lithium niobate

Erbium-doped lithium niobate (Er:LiNbO₃) is a prospective photonics component, operating at 1.5 μm, which could find its use chiefly as an optical amplifier or waveguide laser. In this study, we have focused on the properties of the optically active Er:LiNbO₃ layers, which are fabricated by medium energy ion implantation under various experimental conditions. Erbium ions were implanted at energies of 330 and 500 keV with fluences of 1.0 × 10¹⁵, 2.5 × 10¹⁵ and 1.0 × 10¹⁶ cm^?2 into LiNbO₃ single-crystalline cuts of various orientations. The as-implanted samples were annealed in air at 350 °C for 5 h. The depth distribution and diffusion profiles of the implanted Er were measured by Rutherford Backscattering Spectroscopy (RBS) using 2 MeV He⁺ ions. The projected range R_P and projected range straggling ΔR_P were calculated employing the SRIM code. The damage distribution and structural changes were described using the RBS/channelling method. Changes of the lithium concentration depth distribution were studied by Neutron Depth Profiling (NDP). The photoluminescence spectra of the samples were measured to determine whether the emission was in the desired region of 1.5 μm. The obtained data made it possible to reveal the relations between the structural changes of erbium-implanted lithium niobate and its luminescence properties important for photonics applications.     

Effectiveness of daylighting design and occupant visual satisfaction in a LEED Gold laboratory building

Using daylight as primary light source has been widely recognized as an important strategy to reduce building energy demand and enhance indoor environment quality. However, to design and operate a building to make full use of daylight, which is a dynamic light source, to meet diverse occupant needs remains a challenge. This paper reports a post-occupancy study of the visual environment in a laboratory building on a university campus, and puts a spotlight on the building occupants as it examines the effectiveness of the daylighting design and systems integration in creating a visual environment to support occupant comfort and satisfaction while reducing artificial lighting demand. Results show generally high satisfaction with daylit work environment and positive effect of the horizontal shading strategy. Issues about the integration between daylighting and electric lighting systems and level of occupant control are identified and discussed for improving the effectiveness of daylighting and enhancing the quality of the visual environment in the building of study. A multiple-tool methodology is developed and tested, which included occupant surveys, interviews, illuminance measurements, continuous data loggers, fisheye-lens camera and glare-identifying software, and documentation of spatial settings, systems features, and user behavior.     

Minimum length of a single-mode fiber spatial filter

Using the concept of leaky modes, we derive the minimum length of a single-mode fiber required to act as a spatial-mode filter of given quality. The degree of filter action is defined by the ratio of power carried by the fundamental mode to that carried by the leaky modes.     

Optical properties and quantum efficiency of thin-film alkali halides in the far ultraviolet

The optical constants of thin films of CsI, KI, and KBr and the quantum efficiency (QE) of planar photocathodes made with these alkali halides in the 53.6-174.4-nm spectral range are presented. The optical constants were obtained from measurements of the reflectance as a function of incidence angle. The effect of film heating and exposure to UV irradiation on the optical properties and on the QE of the three alkali halides was investigated. KBr was found to be the most stable material for both heating and UV irradiation. KI appeared to be close to temperature stable, whereas UV exposure affected its optical constants. CsI optical constants changed after 420 K heating and after UV exposure. The changes in the optical constants were related to the QE changes, and a certain correlation between both variations was determined. However, it was also demonstrated that the QE changes cannot be explained solely by the changes in optical constants.     

Measurements on a 215-GHz subharmonically pumped waveguide mixerusing planar back-to-back air-bridge Schottky diodes

This paper presents design and performance data for a 215-GHz subharmonically pumped waveguide mixer using an antiparallel-pair of planar air-bridge-type GaAs Schottky-barrier diodes. The waveguide design is a prototype for a 640-GHz system and uses split-block rectangular waveguide with a 2:1 width-to-height ratio throughout. The measured mixer noise and conversion loss are below that of the best reported whisker contacted or planar-diode mixers using the subharmonic-pump configuration at this frequency. In addition, the required local oscillator power is as low as 3 mW for the unbiased diode pair, and greater than 34 dB of LO noise suppression is observed. Separate sideband calibration, using a Fabry-Perot filter, indicates that the mixer can be tuned for true double sideband response at an intermediate frequency of 1.5 GHz. Microwave scale model measurements of the waveguide mount impedances are combined with a mixer nonlinear analysis computer program to predict the mixer performance as a function of anode diameter, anode finger inductance, and pad-to-pad fringing capacitance. The computed results are in qualitative agreement with measurements, and indicate that careful optimization of all three diode parameters is necessary to significantly improve the mixer performance     

Zum Einfluß der Gefügeausbildung auf das Korrosionsverhalten von Aluminiumbronzen in Kochsalzlösung

Influence of the structure on the corrosion behaviour of aluminium bronzes in sodium chloride solution The influecne of various structural components and their distribution on the corrosion behaviour of binary and complex aluminium bronzes (cast INOXYDA alloys) in a 3% solution of sodium chloride has been investigated qualitatively and quantitatively. Corrosion tests were carried out over a period of 850 h and are interpreted on the basis of single phase properties. The corrosion resistacne of binary and INOXYDA 3 type alloys is markedly decreased if even small amounts of y₂ phase are precipitated in a continuous manner. The occurance of this constituent causes an intense and dangereous dealuminisation reaction. The eutectoid mixture (α + y₂) is always less corrosion resistant than corresponding martensitic structures. While the corrosion behaviour of these alloys is strongly influenced by heat treatment a far less pronounced effect is observed with alloys containing Fe and Ni (type INOXYDA 53 or 90). This is directly related to the fact that precipitation of y₂ is prevented by the addition of Fe and especially of Ni. Such alloys are mainly composed of Ni. Such alloys are mainly composed of α and passive Fe- and Ni-rich K phase. If retained martensite or y₂ are present in addition to the mentioned phases (e.g. in the as cast condition) corrosion resistance is decreased. Appropriate heat treatment results in plain (α + K) structures while simultaneously segregations at α/K grain boundaries disappear and corrosion resistance is improved.     

Modeling kinetic processes controlling hydrogen and acetate concentrations in an aquifer-derived microcosm

Groundwater contaminants may degrade via fermentation to intermediate species, which are subsequently consumed by terminal electron-accepting processes (TEAPs). A numerical model of an aquifer-derived laboratory microcosm is developed to simulate the dynamic behavior of fermentation and respiration in groundwater by coupling microbial growth and substrate utilization kinetics with a formulation that also includes aqueous speciation and other geochemical reactions including surface complexation, mineral dissolution, and precipitation. The model is used to test approaches that currently make use of H2(aq) to diagnose prevalent TEAPs in groundwater. Competition between TEAPs is integral to the conceptual model of the simulation, and the results indicate that competitive exclusion is significant but with some overlap found in the temporal sequence of TEAPs. Steady-state H2(aq) concentrations observed during different TEAPs do not differ significantly. The results are not consistent with previous applications of the partial equilibrium approach since most TEAP redox pairs exhibit free energies that suggest a particular process is able to proceed, yet observations here show that this process does not proceed.     

Upscaling and automation of electrophysiology: toward high throughput screening in ion channel drug discovery

Effective screening of large compound libraries in ion channel drug discovery requires the development of new electrophysiological techniques with substantially increased throughputs compared to the conventional patch clamp technique. Sophion Bioscience is aiming to meet this challenge by developing two lines of automated patch clamp products, a traditional pipette-based system called Apatchi-1, and a silicon chip-based system QPatch. The degree of automation spans from semi-automation (Apatchi-1) where a trained technician interacts with the system in a limited way, to a complete automation (QPatch 96) where the system works continuously and unattended until screening of a full compound library is completed. The performance of the systems range from medium to high throughputs.