差压法测定低浓度BOD5水样准确度差的原因浅析

通过与标准稀释法的比对实验,分析了差压法测定低浓度BOD5样品时精密度和准确度差的原因,并予以讨论.     

水性涂料漆膜防霉效力测试若干问题的探讨

介绍了防霉剂防霉效力不同的测试方法以及国内外漆膜防霉性能测试的相关标准，提出了水性涂料漆膜防霉效力测试应采用人工环境长霉试验方法，探讨了国内外水性涂料防霉标准及测试方法中有待解决的问题。     

河长制中的河流岸线规划与管理

根据河流城镇区域岸线和乡村区域岸线的特点,针对河岸纵向、横向、功能区划以及主体工程的要求,分别提出了各自规划的具体要求和方法,并详述了岸线评价方法,提出了岸线管控的具体建议,为河长制中的岸线开发、保护提供参考。     

PA-1010/ABS合金的性能研究

研究了以自制的马来酸酐 (MAH)接枝改性ABS(MABS)作为PA 10 10 /ABS增容剂所形成的PA 10 10 /ABS合金的性能。研究结果表明 ,随ABS中马来酸酐接枝量的上升 ,PA 10 10 /ABS合金的冲击强度提高 ,保持PA 10 10与ABS用量在某一恰当配比范围内 ,可得到冲击强度高 ,维卡软化温度较高的合金。     

不同老化方式对沥青低温性能的影响分析

研究了不同老化方式对沥青低温性能的影响,分3个阶段,对不同老化方式的试验结果进行了比较.阶段1研究表明,沥青在压力老化容器(PAV)中100℃条件下老化20 h后的低温性能与在1.01×105Pa、60℃条件下老化38 d后的低温性能相差无几.阶段2研究表明,可以通过58℃、10 r/s时的高温因子G*/sinδ来修正低温性能分级,从而可以利用短期老化来代替长期老化试验.阶段3研究表明,沥青的低温性能会随着老化时间改变而变化.当老化时间较短时,低温性能分级由劲度指标控制;当老化时间较长时,低温性能分级将转变为由蠕变速率控制.     

Generating Web Traffic Based on User Behavioral Model

Generating web traffic is of great importance to analyze performance of new designed network, test new equipment, and verify new protocols, etc.. However, most existing traffic generation systems tend to simulate the overall characteristics of network traffic, while neglecting of the behavior of the individual users. Nevertheless, in principle, the emerged characteristics of overall traffic originate from the aggregation of individual users＇ access behavior. In this paper, we propose an innovative web traffic generating method based on user browsing behavior. Our method simulates the real users＇ accessing behavior, and visits the real web servers. Then, we design and develop a web traffic generating system. Because our system accesses the real websites, it can produce almost the real network traffic. The test results show that the traffic generated by our system has characteristics of burstiness and self-similarity, which are widely found and characterized in many real networks. In addition, our system can better reflect real user＇s web browsing behavior.     

一种基于网络信息平台的影像显示方法

针对大幅面遥感影像显示时兼顾大范围和高分辨率的要求,提出了一种基于计算机网络和地理信息平台的显示方法。通过调度局域网中多台计算机终端进行配合,使不同终端同时显示一幅超大影像的不同部分,相邻终端显示影像的位置无缝衔接,实现了低成本对一幅超大影像高分辨率、大范围显示的效果。该方法具有很好的扩展性,理论上可以实现对任意大的影像进行高分辨率显示。     

双组分海岛型超细纤维及其染整工艺研究

采用正交设计对海岛纤维进行了碱减量开纤处理，减量率为25%-35%。在优化条件下：NaOH:15g/L～20g/L;碱减量调节剂：0.1g/L～0.5g/L;耐碱渗透剂；1g/L～5g/L;80℃～85℃；25～30分钟，将海组分COPET除去，获得了0.039dt的超细纤维。此纤维染色时K/S值较高，提升同步性好，三原色临界温度为90℃～120℃，120℃时上染率达到90%、扩散性和迁移性好，获得各项牢度较好的匀染效果。对影响海岛纤维的织物风格、纤维开纤和染色的有关因素进行了讨论。     

鼠标的组合型腔浇注系统优化设计

本文将注塑系统平衡的理论和数值模拟技术紧密结合起采，研究鼠标组合型腔的浇注系统。如果熔体不能同时到达各浇口并充满各个型腔，将导致压力分布不均匀，使制品的质量下降，以至于出现充不满等问题，本研究对浇注系统优化，得出了一组最佳的浇注系统方案，从而保证熔体能够基本上在同一时间充满型腔，实现熔体的平衡流动。从分析结果可知，要平衡熔体在组合型腔内的流动，分流道的截面形状和尺寸起到非常大的作用。     

伊朗轻质原油减渣馏分油水界面张力的研究

The vacuum residual from Iranian Light crude oil are separated into a series of 16 narrow fractions according to the molecular weight by the supercritical fluid extraction and fractional (SFEF) technology. The chemical element and the UV spectrum of each fraction are analyzed. The effects of several factors on the interfacial tension are investigated, which are the fraction concentration in oil phase, the ratio of oil component, the salts dissolved in the water phase and the pH value. The interfacial tension decreases rapidly as the concentration of the residual fraction in the oil increases, showing a higher interfacial activity of the fraction. The interfacial tension changes, as the amount of absorption or the state of the fractions in the interface changes resulting from different ratios of oil, different kinds or concentrations of salts in water, and different pH values. It is concluded that the intrfacial tension changes regularly, corresponding to the regular molecular parameters of the vacuum residual fractions.