A randomized voltage vector switching scheme for three-level powerinverters

In this paper, a feasibility study of a randomized space vector switching scheme for three-level inverters is reported. Based on the traditional space vector concept for pulse width modulation (PWM) inverters, the sequence of the space vector is randomized in this scheme. The overall vector, resulting from the randomization, is mathematically identical to that of the traditional space vector. It has been found that the randomized scheme can effectively spread the switching noise over a wide frequency range and at the same time keep the steady-state link capacitor voltage balanced. The proposed scheme has been implemented in real time in a digital controller and its features have been experimentally confirmed     

高功率双工旋转场移相器

旋转场移相器具有移相精度高(均方根误差可小于1°)和温度稳定性好等特点,通过改进射频传输结构,可大大提高他的功率容量。利用旋转场移相器的互易特性和铁氧体圆极化器的非互易特性,设计出高功率双工旋转场移相器。其双工特性可将收/发信号分开,实现移相器和环行器的双重功能,用于天线的收发通道等场合时,可省去一个高功率环行器,结构紧凑。分析了双工旋转场移相器的工作原理,阐述了高功率应用下的设计方法,推导出了管状铁氧体的相移量计算公式,按此方法设计了实用的器件,并给出了试验数据。     

影响喷气燃料与橡胶相容性的因素

采用几种具有不同初始物理性能及不同丙烯腈含量、不同硫化剂和硫化程度的丁腈橡胶，考察了其配方和物理性能对采用不同工艺条件生产的喷气燃料的相容性。结果表明，喷气燃料与橡胶的相容性不仅与喷气燃料的加工工艺有关，而且与橡胶的组成及其制备工艺有关。采用非加氢工艺生产的喷气燃料与橡胶的相容性好于采用加氢工艺(特别是加氢裂化工艺)生产的喷气燃料。橡胶材料的初始力学性能的好坏并不完全决定其与喷气燃料相容性的好坏，橡胶材料的耐过氧化物侵蚀能力才是影响相容性好坏的主要因素。橡胶的组成和其制备工艺决定了橡胶在喷气燃料中萃取物的数量和组成，不同萃取物的综合作用给相容性带来不同程度的影响。用硫作硫化剂的橡胶虽然原始强度低于用过氧化物作硫化剂的橡胶，但前者与喷气燃料的相容性却远好于后者。     

关于多媒体和MCAI

阐述了推广应用多媒体计算机辅助教学(MCAI)方法,对目前高等教育行业缓解师资不足、提高教学效率、改善教学效果,尤其对促进教学手段的变革和教学的现代化管理,是一种行之有效的必然途径.     

保山气田新近系羊邑组二-三段沉积微相

保山盆地为滇西的一个具西断东超箕状断陷结构的新近系小型盆地。为搞清区内保山气田的沉积特征，指导该区油气勘探工作，结合沉积岩（物）与沉积环境之间的辩证关系，通过对沉积岩的岩性特征（颜色、岩石类型、岩石结构、黏土矿物、岩相组合）的分析研究，借助于沉积相在测井和地震剖面上的显著特征，研究并划分了保山气田新近系上新统羊邑组二-三段的沉积微相类型。结果表明，在该研究区主要发育了扇三角洲前缘亚相中的水下分流河道、分流河道间、前缘席状砂、河口坝等沉积微相类型，以及浅湖亚相中的浅湖泥和浅湖漫流席状砂沉积微相。剖析各类骨架微相的沉积特征后指出：水下分流河道、河口坝和前缘席状砂为该区最有利的储集砂体。     

小容量机组保护监控一体化

以数字信号处理器(DSP)和复杂可编程逻辑器件(CPLD)为硬件平台,研制了新一代面向中、小型水电站的综合自动化模块.充分发挥MB40智能可编程逻辑控制器(iPLC)及MB100系列保护测控系统的技术优势,将小型水电站的保护装置做成模块插件,融入监控系统,降低了小型水电站自动化设备的成本,为推出真正意义上的面向小型水电站的"五合一"产品打下坚实的基础.     

Bandwidth renegotiation for VBR video over ATM networks

A scheme for delivery or variable bit-rate (VBR) video over asynchronous transfer mode (ATM) networks where bandwidth can be renegotiated during the duration of a call between the video source and the network is considered. Renegotiation can be initiated by either the video source or the network. The video bandwidth requirement is characterized by a usage parameter control (UPC) consisting, in general, of peak rate, burst length, and sustained rate. A baseline design is outlined where rate-control adjusts the source's rate while a new UPC is requested from the network. When granted, the new UPC allows the source to maintain its target quantization and delay requirements. Rate control epochs may be extended when the network blocks UPC requests or sets a lower UPC value to temporally deal with congestion. Simulation results are presented for VBR MPEG video. The results show that with a moderate renegotiation rate the scheme tracks the bandwidth requirements of the source. As a result, the video quality and bandwidth efficiency can be maintained