QH－1型扁环填料的气液接触性能

本文简要介绍了新近研制的ＱＨ－１型扁环填料对于汽液接触过程的流体力学与传质性能。实验表明，这种填料具有通量大、阻力小、传质效率高的优点，可望代替鲍尔环等常用填料，以取得良好经济效益     

超细纤维素胶体和丙烯酰胺的接枝共聚

本文用纤维素材料经酸分解制备具有平衡聚合度（LODP）的微晶纤维素，再分散成超细纤维素胶体（准均相纤维素体系）。用扫描电镜（SEM）观察处理前后的纤维素颗粒尺寸，并比较它们和丙烯酰胺接枝共聚的反应速率、聚合转化率、接枝率、接技效率、聚丙烯酰胺支链的分子量及其分布的情况。     

Study of stability of high‐temperature polyimides using TG/MS technique

The oxidative stability of the carbon fiber‐reinforced composite of polyimide was examined, in real time, using the evolved gas analysis techniques. Off‐gas degradation products suggested the onset temperature for chain scissions to be fairly low at about 190–220°C. Based on the off‐gas products present and the trend of their release, the composite degradation mechanism appeared to be similar between 190 and 371°C, thereby marking 371°C to be the highest accelerated aging temperature for its long‐term lifetime prediction. Beyond 371°C, different degradation mechanisms would apply. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1219–1227, 2002     

常压合成防老剂4020的工业生产工艺

以小试和中试条件为依据，研究了防老荆4020[N-(1，3-二甲基丁基)-N′-苯基对苯二胺]的工业生产新工艺。以对氨基苯酚、甲基异丁基酮、甲酸和苯胺为原料，用三步法在常压下合成了防老荆4020。优化的工艺是用3台反应釜并联，差时1／3个生产周期分别开工，用1台同客积的蒸馏釜与之配套，并在4台釜中都装有冷却蛇管。该工艺设备投资低，生产用时短，产物收率达90.1％。     

Elastic Properties and Microcracking Behavior of Particulate Titanium Diboride–Silicon Carbide Composites

The spontaneous microcracking of particulate TiB₂–SiC composites is studied as a function of TiB₂ volume fraction. The degree of microcracking was examined by measuring elastic properties from room temperature to 1300°C. The results showed that only one composition contains microcracks. All other compositions did not microcrack regardless of TiB₂ volume fraction. This was attributed to the difference in the sintering aids. In particular, the Al₂O₃ sintering aid needed in these compositions had reacted with SiO₂ to form an amorphous grain boundary phase that allowed residual stresses to relax by viscous flow at moderate to high temperatures. The existence of this amorphous grain boundary phase was directly observed by transmission electron microscopy.     

四通道煤粉燃烧器在窑内燃烧的热态数值模拟分析

1前言西部高原地区随着水泥生产线日产量逐步提高,喂煤量随之加大,导致喷煤管内煤粉存在不均匀现象,分解炉出口的温度也相应波动,造成了分解炉喷     

Preparation and characterization of porous carbon beads and their application in dispersing small metal crystallites

Porous carbon beads were prepared by the pyrolysis of poly(vinylidene chloride) beads that were synthesized by suspension polymerization. After prolysis treatment at 180–300 °C under argon stream, the polymeric beads were further carbonized at 1000 °C for 3 h under argon stream to acquire porous carbon beads, of which the specific surface area was about 1000 m²/g, and pore size was mainly in the width range of 0.8–1.2 nm. The carbon structure and surface chemical composition characterized by X-ray diffraction and X-ray photoelectron spectroscopy, depended on the preparation temperature and the relations between them were examined. The characterization of the carbon beads by scanning electron microscopy, atomic force microscopy presented the morphological structure of the carbon beads surface and a global view of pores. The dispersion of nickel crystallites on the carbon beads surface was characterized by electron microprobe analysis. This study reveals that uniform surface morphological structure leads to the fine dispersion of metal crystallites.     

Effect of miscibility and forced compatibility on damping properties of CIIR/PAc blend

In this study, a kind of novel damping materials was prepared based on the blend of chlorinated butyl rubber (CIIR) and polyacrylate (PAc) synthesized by different molar ratio of butyl methacrylate and ethyl acrylate. Research results from experiments and analyses by employing DMA, TEM, and FTIR show that whether at a cocured system or noncocured system, it can be achieved to shift a loss peak of CIIR towards a higher temperature region and to keep the damping value from markedlly decreasing, which broadens the effective damping function area of CIIR to the vicinity of ambient temperature. In the former system, the thermodynamical miscibility of CIIR and PAc, to some extent, is predominated by the molecular design of PAc, while in the latter system, covulcanized networks play a more significant role in improving compatibility and abating the peak split, though the suppression effect of thermal stress on the transition of CIIR T_ll transition still can not be neglected. Furthermore, transition state derived from the cocuring CIIR and PAc cannot make the phase separation completely take place, and consequently results in the deformation of phase morphology of the cocured CIIR/PAc blend. It is the influence of thermodynamics miscibility and forced compatibility in different size that makes the suppression effect of foreign PAc on CIIR T_ll transition be controllable. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3127–3133, 2006     

聚合物系的挥发分脱除——起泡脱挥机理及模型

聚合物系的挥发分脱除(以下简称脱挥)是聚合物生产中的关键工艺之一。本文对国外有关聚合物系脱挥领域的文献作了综述,介绍了聚合物脱挥的基本概念,重点描述了起泡脱挥传质中气泡的成核、生长、破裂,气泡合并、凝聚的机理以及它们的表达式,并介绍了几种起泡脱挥的模型。     

基于硬件Kalman滤波器的航拍云台姿态获取

航拍云台姿态获取是航空摄影中相机姿态校正的基本依据,介绍了一种基于硬件Kalman滤波器的航拍云台姿态获取的实现方法。设计中采用MPU6050作为系统的姿态传感器,它提供三轴角速度和三轴加速度数据。根据系统特征建立Kalman滤波方程对这些数据进行数据融合处理,Kalman滤波过程中的加减乘除浮点数运算由FPGA实现,外部数据的采集和时序的控制也由FPGA完成。经过对实际数据的处理实验,得出该硬件模块可以获得较为准确的航拍云台姿态,输出结果误差在-1.5°~1.5°范围内。