Enhanced properties of SPEEK with incorporating of PFSA and barium strontium titanate nanoparticles for application in DMFCs

Novel blend nanocomposite proton‐exchange membranes were prepared using sulfonated poly (ether ether ketone) (SPEEK), perfluorosulfonic acid (PFSA), and Ba_0.9Sr_0.1TiO₃ (BST) doped‐perovskite nanoparticles. The membranes were evaluated by attenuated total reflection, X‐ray diffraction spectroscopy, water uptake, proton conductivity, methanol permeability, and direct methanol fuel cell test. The effect of two additives, PFSA and BST, were investigated. Results indicated that both proton conductivity and methanol barrier of the blend nanocomposite membranes improved compared with pristine SPEEK and the as‐prepared blend membranes. The methanol permeability and the proton conductivity of the blend membrane containing 6 wt% BST obtained 3.56 × 10^?7 cm² s^?1 (at 25 °C) and 0.110 S cm^?1 (at 80 °C), respectively. The power density value for the optimum blend nanocomposite membrane (15 wt% PFSA and 6 wt% BST) (54.89 mW cm^‐2) was higher than that of pristine SPEEK (31.34 mW cm^‐2) and SPF15 blend membrane (36.12 mW cm^‐2).     

Copper chloride modified copper electrode: Application to electrocatalytic oxidation of methanol

Copper chloride modified copper (CCMC) electrode was prepared as a new electrode. For the preparation of the modified electrode, the polished copper electrode was placed in 0.1 M CuCl₂ solution for 20 s. In this step, a layer of copper (I) chloride was formed at the surface of copper electrode. Then, the electrode was placed in 0.1 M NaOH and the electrode potential was cycled between −250 and 1000 mV (vs. SCE) at a scan rate of 50 mV s⁻¹ for 5 cycles in a cyclic voltammetry regime until a featureless voltammogram was obtained. Surface physical characteristics of the modified electrode were studied by scanning electron micrographs (SEM). Results showed that considerable amounts of microcrystals have been formed on the copper surface during the modification. Surface elemental analysis of electrode were performed by energy dispersive X-ray (EDX) technique. The results showed that in addition to copper and chloride elements, there is also oxygen at the surface of CCMC electrode. This indicates that a layer of (ClCu)₂O was formed at the surface of the modified electrode. The electrocatalytic activity of the modified electrode for the oxidation of methanol, in aqueous basic solution was studied by using cyclic voltammetry. Results showed that, copper chloride modified electrode can improve the activity of Cu towards the oxidation of this small organic molecule, showing the possibility of attaining good electrocatalytic anodes for fuel cells. The modified electrode shows a stable and linear response in the concentration range of 5 × 10⁻³ to 8 × 10⁻² M with a correlation coefficient of 0.9958.     

Thermorheological and mechanical behavior of polylactide and its enantiomeric diblock copolymers and blends

In this study, different compositions of nearly monodispersed diblock copolymers of dl-lactide or d-lactide and l-lactide were synthesized by living ring-opening polymerization with a dinuclear indium catalyst. The effects of molecular weight and block length ratio on the rheological behavior of dl and l-lactide diblock copolymers in the disordered state were investigated. For comparison, blends of PDLLA and PLLA homopolymers of equivalent molecular weights to the diblock copolymers were prepared. We found that the time–temperature (t–T) superposition principle is applicable to the diblock copolymers PLLA-b-PDLLA and blends in the disordered state. However, the t–T superposition failed at low temperatures close to the temperature of crystallization. In contrast, diblock copolymers PLLA-b-PDLA formed stereocomplex crystallites of high melting point (slightly above 200 °C) that causes a viscosity enhancement. The failure of t–T superposition was found due to existing of micro homo or stereocomplex crystallites. The non-isothermal crystallization behavior was investigated using differential scanning calorimetry (DSC). The DSC thermograms of blends exhibited a single glass transition at 50–60 °C followed by melting point of PLLA at 177 °C. With decreasing of the PLLA content in the blends, the intensity of the melting peak decreased. In addition, different crystallization behavior was observed for diblock copolymers compared to their equivalent blends. Specifically, low temperatures and enthalpies of melting peaks were observed for diblock copolymers. These also show improvement in elongation at break and tensile strength as compared to their counterpart homopolymer blends.     

Study of the motion of a spheroidal drop in a linear shear flow

The motion of a spheroidal deformable drop in a simple shear flow is simulated using a finite-difference/front-tracking method. The effect of surface tension coefficient, viscosity ratio and inertia on lateral migration and deformation of the drop is investigated. It is revealed that the deformation of a spheroidal drop is directly related to the capillary and Reynolds numbers. In the limit of finite Reynolds numbers, the equilibrium position of prolate drops depends strongly on the viscosity ratio; the final position of more viscous drops is closer to the wall in contrast with the spherical ones. As the deformability of drops increases and the inertial force decreases, the rate of migration of the prolate drops increases. Although the steady-state position does not depend on the capillary and Reynolds numbers, the migration rate depends considerably on these dimensionless parameters. In addition, the rate of migration is a decreasing function of the aspect ratio due to different direction of the lift force acting on the drop.     

Green synthesis of AgCl/Ag3 PO4 nanoparticle using cyanobacteria and assessment of its antibacterial,colorimetric detection of heavy metals and antioxidant properties

In this study, the extract of two strains of cyanobacteria was used for the synthesis of silver nanoparticles (NPs). UV–vis spectroscopy, X‐ray diffraction, dynamic light scattering and field emission scanning electron microscopy (FESEM) analyses were carried out to characterise the NPs. The antioxidant activity and heavy metal detection properties were investigated; moreover, their minimum inhibitory concentration and minimum bactericidal concentration against the multi‐drug resistant bacteria were determined. The most abundant materials in these extracts were carbohydrates, so the biosynthesis of NPs using exopolysaccharide (EPS) was also investigated. The surface plasmon resonance of NPs had a peak at 435 nm and EPS NPs at 350–450 nm. The NPs produced by Nostoc sp. IBRC‐M5064 extract revealed the face‐centred cubic (fcc) structure of AgCl, while NPs of N. pruniforme showed the fcc crystalline structure of Ag₃ PO₄ and AgCl. The FESEM showed the spherical shape of these NPs. The AgCl/Ag₃ PO₄ colloid, in comparison with AgCl, showed better antioxidant activity and antibacterial effect. The heavy metal detection analysis of NPs revealed that the NPs of both stains involved in Hg (NO₃)₂ detection.Inspec keywords: drugs, light scattering, silver, biochemistry, surface plasmon resonance, X‐ray diffraction, silver compounds, antibacterial activity, ultraviolet spectra, nanoparticles, visible spectra, colloids, microorganisms, nanofabrication, field emission scanning electron microscopy, chemical sensors, nanosensorsOther keywords: cyanobacteria, antibacterial detection, colorimetric detection, dynamic light scattering, antioxidant activity, heavy metal detection analysis, silver nanoparticle synthesis, field emission scanning electron microscopy analysis, UV‐visible spectroscopy analysis, X‐ray diffraction analysis, inhibitory concentration, exopolysaccharide, surface plasmon resonance, Nostoc sp. IBRC‐M5064 extract, face‐centred cubic crystalline structure, FESEM, spherical shape, antibacterial effect, multidrug resistant bacteria, wavelength 350.0 nm to 450.0 nm, AgCl‐Ag₃ PO₄ , Ag     

Some new efficient multipoint iterative methods for solving nonlinear systems of equations

It is attempted to put forward a new multipoint iterative method of sixth-order convergence for approximating solutions of nonlinear systems of equations. It requires the evaluation of two vector-function and two Jacobian matrices per iteration. Furthermore, we use it as a predictor to derive a general multipoint method. Convergence error analysis, estimating computational complexity, numerical implementation and comparisons are given to verify applicability and validity for the proposed methods.     

Study on sterol fraction of commercial brands of milk,yoghurt and butter sold in Iranian market and chemometric data analysis

A gas chromatographic procedure for analysis of sterols was developed to detect possible addition of vegetable oils to milk, yoghurt and butter samples. The method involved fat extraction, saponification, hexane extraction, silylation of sterols and then analysis by gas chromatography. The sterol content of 102 samples of milk, yoghurt and butter was determined. Phytosterol content higher than 5% of total sterol was observed in four samples of milk and yoghurt. Principal component analysis showed that there was a direct relationship between the level of phytosterols and fat percentage in yoghurt samples. The described method is accurate and reliable enough to be employed regularly in food quality laboratories.     

Aerosol formation due to a dental procedure: insights leading to the transmission of diseases to the environment

As a result of the outbreak and diffusion of SARS-CoV-2, there has been a directive to advance medical working conditions. In dentistry, airborne particles are produced through aerosolization facilitated by dental instruments. To develop methods for reducing the risks of infection in a confined environment, understanding the nature and dynamics of these droplets is imperative and timely. This study provides the first evidence of aerosol droplet formation from an ultrasonic scalar under simulated oral conditions. State-of-the-art optical flow tracking velocimetry and shadowgraphy measurements are employed to quantitatively measure the flow velocity, trajectories and size distribution of droplets produced during a dental scaling process. The droplet sizes are found to vary from 5 µm to 300 µm; these correspond to droplet nuclei that could carry viruses. The droplet velocities also vary between 1.3 m s⁻¹ and 2.6 m s⁻¹. These observations confirm the critical role of aerosols in the transmission of disease during dental procedures, and provide invaluable knowledge for developing protocols and procedures to ensure the safety of both dentists and patients.     

Statistical factor-screening and optimization in slurry phase bioremediation of 2,4,6-trinitrotoluene contaminated soil

Since slurry phase bioremediation is a promising treatment for recalcitrant compounds such as 2,4,6-trinitrotoluene (TNT), a statistical study was conducted for the first time to optimize TNT removal (TR) in slurry phase. Fractional factorial design method, 2(IV)(7-3), was firstly adopted and four out of the seven examined factors were screened as effective. Subsequently, central composite design and response surface methodology were employed to model and optimize TR within 15 days. A quadratic model (R(2) = 0.9415) was obtained, by which the optimal values of 6.25 g/L glucose, 4.92 g/L Tween 80, 20.23% (w/v) slurry concentration and 5.75% (v/v) inoculum size were estimated. Validation experiments at optimal factor levels resulted in 95.2% TR, showing a good agreement with model prediction of 96.1%. Additionally, the effect of aeration rate (0-4 vvm) on TR was investigated in a 1-liter bioreactor. Maximum TR of 95% was achieved at 3 vvm within 9 days, while reaching the same removal level in flasks needed 15 days. This reveals that improved oxygen supply in bioreactor significantly reduces bioremediation time in comparison with shake flasks.     

Self‐Assembling Peptide as a Potential Carrier for Hydrophobic Anticancer Drug Ellipticine: Complexation,Release and In Vitro Delivery

The self‐assembling peptide EAK16‐II is capable of stabilizing hydrophobic compounds to form microcrystal suspensions in aqueous solution. Here, the ability of this peptide to stabilize the hydrophobic anticancer agent ellipticine is investigated. The formation of peptide‐ellipticine suspensions is monitored with time until equilibrium is reached. The equilibration time is found to be dependent on the peptide concentration. When the peptide concentration is close to its critical aggregation concentration, the equilibration time is minimal at 5 h. With different combinations of EAK16‐II and ellipticine concentrations, two molecular states (protonated or cyrstalline) of ellipticine could be stabilized. These different states of ellipticine significantly affect the release kinetics of ellipticine from the peptide‐ellipticine complex into the egg phosphatidylcholine vesicles, which are used to mimic cell membranes. The transfer rate of protonated ellipticine from the complex to the vesicles is much faster than that of crystalline ellipticine. This observation may also be related to the size of the resulting complexes as revealed from the scanning electron micrographs. In addition, the complexes with protonated ellipticine are found to have a better anticancer activity against two cancer cell lines, A549 and MCF‐7. This work forms the basis for studies of the peptide‐ellipticine suspensions in vitro and in vivo leading to future development of self‐assembling peptide‐based delivery of hydrophobic anticancer drugs.