Effects of Low-Intensity and Long-Term Aerobic Exercise on the Psoas Muscle of mdx Mice: An Experimental Model of Duchenne Muscular Dystrophy

Duchenne muscular dystrophy (DMD) is a muscle disease characterized by the absence of the protein dystrophin, which causes a loss of sarcolemma integrity, determining recurrent muscle injuries, decrease in muscle function, and progressive degeneration. Currently, there is a need for therapeutic treatments to improve the quality of life of DMD patients. Here, we investigated the effects of a low-intensity aerobic training (37 sessions) on satellite cells, peroxisome proliferator-activated receptor-gamma coactivator (PGC)-1α protein (PGC-1α), and different types of fibers of the psoas muscle from mdx mice (DMD experimental model). Wildtype and mdx mice were randomly divided into sedentary and trained groups (n = 24). Trained animals were subjected to 37 sessions of low-intensity running on a motorized treadmill. Subsequently, the psoas muscle was excised and analyzed by immunofluorescence for dystrophin, satellite cells, myosin heavy chain (MHC), and PGC-1α content. The minimal Feret’s diameters of the fibers were measured, and light microscopy was applied to observe general morphological features of the muscles. The training (37 sessions) improved morphological features in muscles from mdx mice and caused an increase in the number of quiescent/activated satellite cells. It also increased the content of PGC-1α in the mdx group. We concluded that low-intensity aerobic exercise (37 sessions) was able to reverse deleterious changes determined by DMD.     

Multi-objective design optimization of a new space radiator

In this work different multi-objective techniques are used to the conceptual design of a new kind of space radiator. Called VESPAR (Variable Emittance Space Radiator), the radiator has an effective variable emittance which makes it able to reduce or avoid the demand for heater power to warm up equipment during cold case operations in orbit. The multi-objective approach was aimed on obtaining a radiator that minimize its mass while at the same time minimize the need for heater power during cold case. Four multi-objective algorithms were used: Elitist Non-dominated Sorting Genetic Algorithm (NSGA-II), Multi-Objective Genetic Algorithm (MOGA), Multi-Objective Simulating Annealing (MOSA) and Multi-Objective Generalized Extremal Optimization (M-GEO). The first three algorithms were used under the modeFrontier^® optimization software package, while M-GEO is a recently proposed multi-objective implementation of the Generalized Extremal Optimization (GEO) algorithm. The Pareto frontier showing the trade-off solutions between radiator mass and heater power consumption is obtained by the four algorithms and the results compared. An assessment of the performance of M-GEO on this problem, compared to the other well-known multi-objective algorithms is also made.     

Natural Lignocellulosic Fibers as Engineering Materials—An Overview

Recent investigations on the tensile properties of natural cellulose-based fibers revealed an increasing potential as engineering materials. This is particularly the case of very thin fibers of some species such as sisal, ramie, and curaua. However, several other commonly used fibers such as flax, jute, hemp, coir, cotton, and bamboo as well as less known bagasse, piassava, sponge gourde, and buriti display tensile properties that could qualify them as engineering materials. An overview of the strength limits attained by these fibers is presented. Based on a tensile strength vs density chart, it is shown that natural fibers stand out as a relevant class of engineering materials.     

Evaluation of a chemical munition dumpsite in the Baltic Sea based on geophysical and chemical investigations

This paper discusses the results of geophysical and chemical investigations carried out in a chemical munition dumpsite in the southern Baltic Sea, east of the island of Bornholm. After WW2 over 32,000 tons of chemical war material was dumped here including shells and bombs as well as small drums and containers. The geophysical investigations combined very-high-resolution seismics and gradiometric measurements. The results indicate the presence of a large number of objects buried just below the seafloor. The size of the objects and their distribution, with a marked increase in density towards the center of the dumpsite, suggests that we are dealing with dumped war material. Sediment and near-bottom water samples, taken within the dumpsite and in the surrounding area, were analysed for the presence of various chemical warfare agents (CWA) including Adamsite, Clark, sulphur mustard, tabun, chlorobenzene and arsine oil. The results indicate a widespread contamination that reaches far beyond the dumpsite boundary. CWA degradation products were found in most of the sediment samples. The contamination was mostly related to arsenic containing compounds; only one sample indicated the presence of sulfur mustard. Although the correlation between detected objects and CWA concentrations is not always straightforward, the overall results suggest that a lot of the dumped war material is leaking and that over the years the contamination has reached the seafloor sediments.     

New functional fibre in milk puddings: Effect on sensory properties and consumers' acceptability

The effect of the addition of a new functional fibre (high-amylose maize starch, HAMS, as a source of resistant starch), recently available in the market, on sensory characteristics and consumers' acceptability of milk puddings was studied. Milk puddings containing modified waxy maize starch and κ-carrageenan were produced with different HAMS concentrations (0, 1, 2, 3 and 4%). Higher HAMS concentration caused changes in the sensory characteristics of milk puddings. Particularly, sensory attributes such as some roughness, rough afterfeel and floury taste appeared. Besides, the addition of HAMS caused an increase in manual and oral thickness and a decrease in creaminess, melting, and sweetness. A HAMS enrichment level of 1.4% in this product was estimated as the maximum concentration that does not significantly modify consumers' overall acceptability. Using survival analysis the proportion of consumers who would buy milk desserts containing 1.4 % HAMS was estimated as 71%. Consumers more interested in consuming functional foods enriched with fibre were more tolerant to the sensory changes caused by the addition of HAMS to the milk puddings.     

Burial grounds’ impact on groundwater and public health: an overview

The most common practice for disposal of dead bodies is inhumation in soil, which favours interactions with the surrounding environment and returns nutrients to the life cycle. However, when the burial ground is located where hydrogeological, geological and climatic conditions are not favourable to the process, contamination of soils and groundwater may occur, and decomposition may be inhibited, leading to social, economic and political problems. The most critical parameters when assessing the pollution potential of a burial ground are inhumation depth, geological formation, depth of the water table, density of inhumations, soil type and climate. Considering that, this paper presents an overview of the potential threat that cemeteries can pose, analysing and discussing the influence of the main variables causing environmental impacts and public health risks.     

The Impact of Polyoxyethylene Sorbitan Surfactants in the Microstructure and Rheological Behaviour of Emulsions Made With Melted Fat From Cupuassu (<Emphasis Type="Italic">Theobroma grandiflorum</Emphasis>)

Cupuassu fat is a good candidate for partial substitution of cocoa butter in many products, including emulsions. However, for such use it is necessary to know the characteristics of the products prepared with cupuassu fat. Therefore, the main goal of this work is to characterize emulsions prepared with cupuassu fat using the surfactants Tween^® 60, Tween^® 80 and Tween^® 85 as emulsifiers. The emulsions were prepared at 43 °C with addition of 0.5 or 1.5 % (w/v) of surfactant and compared with an emulsion without surfactant. All emulsions were analysed by conductivity, stability, pH, optical microscopy, rheology and oxidative stability. It was verified that the emulsions prepared with Tween^® 60 and Tween^® 80 have higher stability, smaller droplet size and higher apparent viscosity. Also, these properties are positively influenced by the concentration of the surfactant. On the other hand, emulsions prepared with Tween 85 or without surfactant reached unsatisfactory results. The rheological behaviour of the emulsions was adequately described by both Herschel-Bulkley and Mizhari-Berki models revealing pseudoplastic character. These emulsions also present strong gel behaviour, with storage modulus higher than loss modulus. In conclusion, cupuassu fat can be used as oil phase for emulsions products and this characterization helps to understand their behaviour in order to increase their use in food industry.     

COVID-19 and Lung Mast Cells: The Kallikrein–Kinin Activation Pathway

Mast cells (MCs) have relevant participation in inflammatory and vascular hyperpermeability events, responsible for the action of the kallikrein–kinin system (KKS), that affect patients inflicted by the severe form of COVID-19. Given a higher number of activated MCs present in COVID-19 patients and their association with vascular hyperpermeability events, we investigated the factors that lead to the activation and degranulation of these cells and their harmful effects on the alveolar septum environment provided by the action of its mediators. Therefore, the pyroptotic processes throughout caspase-1 (CASP-1) and alarmin interleukin-33 (IL-33) secretion were investigated, along with the immunoexpression of angiotensin-converting enzyme 2 (ACE2), bradykinin receptor B1 (B1R) and bradykinin receptor B2 (B2R) on post-mortem lung samples from 24 patients affected by COVID-19. The results were compared to 10 patients affected by H1N1pdm09 and 11 control patients. As a result of the inflammatory processes induced by SARS-CoV-2, the activation by immunoglobulin E (IgE) and degranulation of tryptase, as well as Toluidine Blue metachromatic (TB)-stained MCs of the interstitial and perivascular regions of the same groups were also counted. An increased immunoexpression of the tissue biomarkers CASP-1, IL-33, ACE2, B1R and B2R was observed in the alveolar septum of the COVID-19 patients, associated with a higher density of IgE⁺ MCs, tryptase⁺ MCs and TB-stained MCs, in addition to the presence of intra-alveolar edema. These findings suggest the direct correlation of MCs with vascular hyperpermeability, edema and diffuse alveolar damage (DAD) events that affect patients with a severe form of this disease. The role of KKS activation in events involving the exacerbated increase in vascular permeability and its direct link with the conditions that precede intra-alveolar edema, and the consequent DAD, is evidenced. Therapy with drugs that inhibit the activation/degranulation of MCs can prevent the worsening of the prognosis and provide a better outcome for the patient.     

New Poly(N-isopropylacrylamide-butylacrylate) Copolymer Biointerfaces and Their Characteristic Influence on Cell Behavior In Vitro

Designing and obtaining new synthetic smart biointerfaces with specific and controlled characteristics relevant for applications in biomedical and bioengineering domains represents one of the main challenges in these fields. In this work, Matrix-Assisted Pulsed Laser Evaporation (MAPLE) is used to obtain synthetic biointerfaces of poly(N-isopropyl acrylamide-butyl acrylate) p(NIPAM-BA) copolymer with different characteristics (i.e., roughness, porosity, wettability), and their effect on normal HEK 293 T and murine melanoma B16-F1 cells is studied. For this, the influence of various solvents (chloroform, dimethylsulfoxide, water) and fluence variation (250–450 mJ/cm²) on the morphological, roughness, wettability, and physico–chemical characteristics of the coatings are evaluated by atomic force microscopy, scanning electron microscopy, contact angle measurements, Fourier-transform-IR spectroscopy, and X-ray photoelectron spectroscopy. Coatings obtained by the spin coating method are used for reference. No significant alteration in the chemistry of the surfaces is observed for the coatings obtained by both methods. All p(NIPAM-BA) coatings show hydrophilic character, with the exception of those obtained with chloroform at 250 mJ/cm². The surface morphology is shown to depend on both solvent type and laser fluence and it ranges from smooth surfaces to rough and porous ones. Physico–chemical and biological analysis reveal that the MAPLE deposition method with fluences of 350–450 mJ/cm² when using DMSO solvent is more appropriate for bioengineering applications due to the surface characteristics (i.e., pore presence) and to the good compatibility with normal cells and cytotoxicity against melanoma cells.