Dynamics and control of a thermally self-sustaining energy storage system using integrated solid oxide cells for an islanded building

A solid oxide cell-based energy system is proposed for a solar-powered stand-alone building. The system is comprised of a 5 kW_el solid oxide fuel cell (SOFC), a 9.5 kW_el solid oxide electrolysis cell (SOEC), and the required balance of plant. The SOFC supplies: 1- building demand in the absence of sufficient solar power, 2- heat for SOEC in endothermic and standby modes. Thermal integration of SOFC and SOEC is implemented through a network of heat exchangers, combined with set of control algorithms. Two control strategies were implemented to actuate the SOFC in response to endothermic heat demands of SOEC by manipulating: 1- electric power, 2- fuel utilization. The results of dynamic simulation of system for two scenarios (sunny day and cloudy day) showed successful compliance of temperature constraints with both methods. Manipulation of fuel utilization, however, resulted in better system performance in terms of efficiency and H₂ balance.     

PSW statistical LSB image steganalysis

Multimedia Tools and Applications - Steganography is the art and science of producing covert communications by concealing secret messages in apparently innocent media, while steganalysis is the art...     

Extraction of caffeine and catechins using microwave-assisted and ultrasonic extraction from green tea leaves: an optimization study by the IV-optimal design

In this research, optimal conditions for extraction of caffeine and polyphenols were established from Iranian green tea leaves. In the first step, caffeine was extracted with efficacy about 86% versed to 4.5% of EGC + EGCG. The EGCG + EGC was extracted from partially decaffeinated green tea leaves through microwave-assisted extraction (MAE) and ultrasound-assisted extraction (USE) with efficiency levels of 95 and 85%, respectively. The best results for the MAE process were obtained with 7.8 min and three number of extraction cycles and for the USE process were as followed: time 57 min, temperature 65 °C, and the number of extraction cycles 3. The total phenol content values at the best conditions of MAE and the USE processes were 125 ± 5 and 96 ± 6 mg gallic acid/g DW. The 50% inhibition (IC₅₀) on 1,1-diphenyl-2-picrylhydrazyl (DPPH) were 56 and 66 mg/g of phenol for the MAE and USE processes.     

Co-Production of Fungal Biomass Derived Constituents and Ethanol from Citrus Wastes Free Sugars without Auxiliary Nutrients in Airlift Bioreactor

The potential of two zygomycetes fungi, Mucor indicus and Rhizopus oryzae, in assimilating citrus waste free sugars (CWFS) and producing fungal chitosan, oil, and protein as well as ethanol was investigated. Extraction of free sugars from citrus waste can reduce its environmental impact by decreasing the possibility of wild microorganisms growth and formation of bad odors, a typical problem facing the citrus industries. A total sugar concentration of 25.1 g/L was obtained by water extraction of citrus waste at room temperature, used for fungal cultivation in shake flasks and airlift bioreactor with no additional nutrients. In shake flasks cultivations, the fungi were only able to assimilate glucose, while fructose remained almost intact. In contrast, the cultivation of M. indicus and R. oryzae in the four-liter airlift bioreactor resulted in the consumption of almost all sugars and production of 250 and 280 g fungal biomass per kg of consumed sugar, respectively. These biomasses correspondingly contained 40% and 51% protein and 9.8% and 4.4% oil. Furthermore, the fungal cell walls, obtained after removing the alkali soluble fraction of the fungi, contained 0.61 and 0.69 g chitin and chitosan per g of cell wall for M. indicus and R. oryzae, respectively. Moreover, the maximum ethanol yield of 36% and 18% was obtained from M. indicus and R. oryzae, respectively. Furthermore, that M. indicus grew as clump mycelia in the airlift bioreactor, while R. oryzae formed spherical suspended pellets, is a promising feature towards industrialization of the process.     

The Acute Toxicity of SiO2 and Fe3O4 Nano-particles on Daphnia magna

Silicon - SiO2 nano-particles are applied in different industries such as ceramic producing, glass making, cosmetic products, medicines, magnetic mixtures, heat and electric insulators and glazing...     

Facile synthesis of novel optically active poly(amide‐imide)s containing N,N′‐(pyromellitoyl)‐bis‐l‐phenylalanine diacid chloride and 5,5‐disubstituted hydantoin derivatives under microwave irradiation

Pyromellitic dianhydride (1,2,4,5‐benzenetetracarboxylic acid 1,2,4,5‐dianhydide) (1) was reacted with L‐phenylalanine (2) in a mixture of acetic acid and pyridine (3 : 2) at room temperature, then was refluxed at 90–100°C and N,N′‐(Pyromellitoyl)‐bis‐L ‐phenylalanine diacid (3) was obtained in quantitative yield. The imide‐acid (3) was converted to N,N′‐(Pyromellitoyl)‐bis‐L ‐phenylalanine diacid chloride (4) by reaction with thionyl chloride. Rapid and highly efficient synthesis of poly(amide‐imide)s (6a–f) was achieved under microwave irradiation by using a domestic microwave oven from the polycondensation reactions of N,N′‐(Pyromellitoyl)‐bis‐L ‐phenylalanine diacid chloride (4) with six different derivatives of 5,5‐disubstituted hydantoin compounds (5a–f) in the presence of a small amount of a polar organic medium that acts as a primary microwave absorber. Suitable organic media was o‐cresol. The polycondensation proceeded rapidly, compared with the conventional melt polycondensation and solution polycondensation, and was almost completed within 10 min, giving a series of poly(amide‐imide)s with inherent viscosities about 0.28–0.44 dL/g. The resulting poly(amide‐imide)s were obtained in high yield and are optically active and thermally stable. All of the above compounds were fully characterized by means of FTIR spectroscopy, elemental analyses, inherent viscosity (η_inh), solubility test and specific rotation. Thermal properties of the poly(amide‐imide)s were investigated using thermal gravimetric analysis (TGA). © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 516–524, 2004     

Active nano-CuPt3 electrocatalyst supported on graphene for enhancing reactions at the cathode in all-vanadium redox flow batteries

Graphene-supported monometallic (Pt) and bimetallic (CuPt₃) cubic nanocatalysts have been investigated as new positive electrode materials for improving the VO₂⁺/VO²⁺ redox process occurring in the vanadium redox flow batteries (VRB). High-resolution transmission electron microscopy (HRTEM) and scanning electron microscopy (SEM) have been employed to characterize the electrodes. The presence of the CuPt₃ nanocubes on graphene conferred higher electrocatalytic activity due to the much higher electroactive area compared to that obtained with the Pt nanoparticles. The electrochemical surface area of the nano-(CuPt₃)-decorated graphene electrode was 105% higher compared to non-decorated graphene, being then a promising alternative for improving the VRB.     

Application of Organic Acid Based Artificial Neural Network Modeling for Assessment of Commercial Vinegar Authenticity

Food Analytical Methods - Vinegar as a nutraceutical substance is classified to various types related to the different substances applied in production process. Therefore, identity of the source...     

Integrated Index for Assessment of Vulnerability to Drought,Case Study: Zayandehrood River Basin,Iran

Drought is an extended period of deficient precipitation that causes damage to crops and reducing their performance, causes temporary scarcity of water for human/livestock consumption. Over the years, various indices have been proposed to identify onset, characterize and quantify the attributes of meteorological, hydrological and agricultural drought by various researchers. Because of the spatial and temporal variability and multiple impacts of drought, it is necessary to develop an integrated index for assessment of vulnerability of this natural phenomenon. The aim of this paper is presenting an integrated index for assessment of vulnerability to drought using multiple factors which includes hydrological, meteorological, land use and other factors. Spatial information of various factors was categorized in to various sub-classes and maps were prepared in spatial domain using Geographic Information System (GIS). This study has been carried out in the Zayandehrood River basin located in west-central Iran with semi-arid region. Due to continue droughts at recent decade, this area has been chosen as a case study. The long-term climate data (1991–2011) used for assessment. The results show that Zayandehrood River basin has experienced 11 dry years, 4 normal years, and 6 wet years in the 21 years. The results have been validated with intensive field surveys.     

Preparation and characterization of P4MVPMnO4/SBA-15 as an efficient heterogeneous oxidant: An organic–inorganic hybrid polymer

This work is concerned about the preparation and characterization of MnO₄⁻ supported poly (4-methyl vinylpyridinium)/SBA-15 which was effectively employed as a heterogeneous oxidant for oxidation of aromatic alcohols. P4MVPMnO₄/SBA-15 exhibited excellent activity and selectivity under mild and solvent-less conditions.