In vitro antimicrobial properties of silver–polysaccharide coatings on porous fiber-reinforced composites for bone implants

Biostable fiber-reinforced composite (FRC) implants prepared from bisphenol-A-dimethacrylate and triethyleneglycoldimethacrylate resin reinforced with E-glass fibers have been successfully used in cranial reconstructions in 15 patients. Recently, porous FRC structures were suggested as potential implant materials. Compared with smooth surface, porous surface allows implant incorporation via bone ingrowth, but is also a subject to bacterial attachment. Non-cytotoxic silver–polysaccharide nanocomposite coatings may provide a way to decrease the risk of bacterial contamination of porous FRC structures. This study is focused on the in vitro characterization of the effect porosity on the antimicrobial efficiency of the coatings against Staphylococcus aureus and Pseudomonas aeruginosa by a series of microbiological tests (initial adhesion, antimicrobial efficacy, and biofilm formation). Characterization included confocal laser scanning microscopy and scanning electron microscopy. The effect of porosity on the initial attachment of S. aureus was pronounced, but in the case of P. aeruginosa the effect was negligible. There were no significant effects of the coatings on the initial bacterial attachment. In the antimicrobial efficacy test, the coatings were potent against both strains regardless of the sample morphology. In the biofilm tests, there were no clear effects either of morphology or of the coating. Further coating development is foreseen to achieve a longer-term antimicrobial effect to inhibiting bacterial implant colonization.     

Identification of late-stage glycosylation steps in the biosynthetic pathway of the anthracycline nogalamycin

Nogalamycin is an anthracycline antibiotic that has been shown to exhibit significant cytotoxicity. Its biological activity requires two deoxysugar moieties: nogalose and nogalamine, which are attached at C7 and C1, respectively, of the aromatic polyketide aglycone. Curiously, the aminosugar nogalamine is also connected through a C-C bond between C2 and C5'. Despite extensive molecular genetic characterization of early biosynthetic steps, nogalamycin glycosylation has not been investigated in detail. Here we show that expression of the majority of the gene cluster in Streptomyces albus led to accumulation of three new anthracyclines, which unexpectedly included nogalamycin derivatives in which nogalamine was replaced either by rhodosamine with the C-C bond intact (nogalamycin R) or by 2-deoxyfucose without the C-C bond (nogalamycin F). In addition, a monoglycosylated intermediate-3',4'-demethoxynogalose-1-hydroxynogalamycinone-was isolated. Importantly, when the remaining biosynthetic genes were introduced into the heterologous host by using a two-plasmid system, nogalamycin could be isolated from the cultures, thus indicating that the whole gene cluster had been identified. We further show that one of the three glycosyltransferases (GTs) residing in the cluster-snogZ-appears to be redundant, whereas gene inactivation experiments revealed that snogE and snogD act as nogalose and nogalamine transferases, respectively. The substrate specificity of the nogalamine transferase SnogD was demonstrated in vitro: the enzyme was able to remove 2deoxyfucose from nogalamycin F. All of the new compounds were found to inhibit human topoisomerase I in activity measurements, whereas only nogalamycin R showed minor activity against topoisomerase II.     

Tracing Campylobacter jejuni strains along the poultry meat production chain from farm to retail by pulsed-field gel electrophoresis, and the antimicrobial resistance of isolates

In this study Campylobacter jejuni isolates were recovered from birds, carcasses and carcass portions from two broiler chicken flocks and from equipment used for carcass and meat processing along the production chain from farms to retail stores. Isolates were subjected to pulsed-field gel electrophoresis (PFGE) using SmaI and KpnI restriction enzymes and their antimicrobial susceptibilities were determined. C. jejuni was recovered from product and equipment used with both flocks at each point in the production chain. The prevalence of C. jejuni in poultry products at retail stores was 58.97% (flock 1) and 69.23% (flock 2). SmaI divided 122 C. jejuni strains from flock 1 and 106 from flock 2 into 17 and 13 PFGE types, respectively. PFGE types H and F were present at all steps along the chain, from farms to retail products. Similarly, for both flocks PFGE type D was detected in crates, slaughterhouse and retail stores. Moreover, the PFGE types were highly diverse at the processing and retail steps. Most PFGE types were resistant to ciprofloxacin (95.45%) and tetracycline (81.82%); and multidrug resistant PFGE types were found in the final products. Our study showed that there were several points of cross-contamination of product along the chain, and a high diversity of PFGE types with antimicrobial resistance to ciprofloxacin and tetracycline in the retail products.     

Distribution of microbes in supercritical CO2 extraction of sea buckthorn (Hippopha? rhamnoides) oils

 The distribution of vegetative microbial cells and their spores in a supercritical CO₂ extraction process was studied. The seed and flesh/skin fractions of the press residue of sea buckthorn berries (Hippopha? rhamnoides) from a juice factory were used as raw materials. A pilot-scale extraction plant was operated at 30 MPa at temperatures of 40 and 60°C. The number of yeasts, moulds and bacteria in the pulp/skin fraction, in the extraction residues, in the extracted oils as well as in the water phases separated from the extracted oils was estimated by the spread plate technique. The microbial content of the flesh/skin material was increased in some extractions by the addition of bacterial spores. In general, the extraction process led to a decrease in the bacterial count of the extracted material, whereas no microbial growth was detected in the oils extracted or in the water phases separated from them. Neither yeasts nor moulds were found in any samples after the extraction process. The microbial status of seed oil and flesh/skin oil obtained by industrial-scale CO₂ extraction at 40°C and at 30 MPa before and after gelatine encapsulation remained unchanged. This proves that supercritical CO₂ can be used to manufacture edible oil products free of living micro-organisms and their spores. Received: 14 May 1996     

Simulation Model for the Model-Based Control of a Biofuel Dryer at an Industrial Combined Heat and Power Plant

The primary aim of this article is to present a simulation model for a bark dryer integrated into a combined heat and power plant. The same model can be used for the model-based control of the dryer. The secondary aim is to evaluate how useful the control is from an economic point of view. Results show that the final fuel moisture content can be stabilised by controlling the drying temperature(s). On the other hand, the deviation in final bark moisture decreases even when the dryer has no control at all. Net incomes resulting from drying increase in most cases compared to dryers without control. The need for control cannot be justified on economic grounds.     

Hardware Cost Measurement of Lightweight Security Protocols

The feasibility of security solution for RFID tags relies heavily on its hardware cost and performance. In the literature the term lightweight solution is used liberally and causes problems when selecting a solution for e.g. RFID environment. Evaluating the actually feasibility of the solution requires electrical engineering skills that many security developers and decision makers may lack. In this paper we describe simple guidelines for approximating the feasibility of the security solution in terms of gates and clock cycles. These guidelines make it easier to evaluate the cryptographic solutions feasibility for targeted hardware and provide a basis for categorisation of lightweight security solutions.     

Low Power High-Speed Neuron MOS Digital-to-Analog Converters with Minimal Silicon Area

Digital-to-analog converts utilizing neuron MOS-transistors were designed. Different DACs were implemented and characterized in order to compare various topologies. Criteria to select structures were low power, fast performance and minimal silicon area. A basic 8-bit version is implemented with only one neuron MOS-transistor and eight capacitors. The silicon area of this D/A converter is only 0.04 mm² and the power consumption is 8.4 mW with conversion speed of 200 MS/s. An enhanced 8 and 10 bit versions utilizing neuron PMOS transistor and some extra circuitry are also proposed and tested. The silicon area of the enhanced 10 bit circuit is only 0.03mm² while the performance is as good as in the case of the basic version. The measured differential nonlinearity is 0.38 LSB and integral nonlinearity is 0.55 LSB for the enhanced 10 bit structure.     

Preparation of Mono‐, Di‐ and Hemicalcium Ferrite Phases via Melt for Reduction Kinetics Investigations

Iron ore concentrates that are used in the iron production are usually agglomerated into sinter or pellets in order to improve their properties in the blast furnace. The main minerals in the magnetite base sinters are hematite, magnetite and Si and Al containing calcium ferrites of which the latter can exist as either monocalcium ferrite, dicalcium ferrite or hemicalcium ferrite depending on the conditions and on the material's iron/calcium‐ratio. In order to study the reduction behaviour of the sinter in the iron production, samples of monocalcium ferrite, dicalcium ferrite and hemicalcium ferrite were prepared by melting different proportions of pure calcium and iron oxides. After melting the samples were cast and cooled. Samples of hemicalcium ferrite were also heated at a certain temperature before the actual reduction experiments in order to ensure the wanted phase composition of the samples. The mineral compositions of the samples were verified using scanning electron microscopy (SEM‐EDS) as well as X‐ray diffraction (XRD). The verification showed that it was possible to produce the samples of calcium ferrites via melting. The conditions needed to reduce the calcium ferrites were estimated with thermodynamic calculations.     

Sulphur poisoning of nickel-based hot gas cleaning catalysts in synthetic gasification gas: I. Effect of different process parameters

The effect of different process parameters on sulphur poisoning of nickel catalysts in tar (toluene), ammonia and methane decomposition was studied. Tests were carried out in a fixed-bed tube reactor at 800–1000°C at 5 and under 20 bar total pressure using a synthetic gasification gas mixture. In the same conditions, sulphur affected less the toluene and methane decomposing activity than the ammonia decomposing activity. Ammonia conversion was affected by the catalyst type but not by the nickel content of catalyst. When temperature was increased the effect of sulphur poisoning was decreased. At 20 bar pressure the poisoning effect of sulphur was stronger than at 5 bar pressure. To prevent sulphur poisoning of nickel catalysts in the tar and ammonia decomposition process at high pressure (20–30 bar), the catalyst process should operate at > 900°C. In addition, by decreasing the space velocity of the process the sulphur poisoning effect could be compensated in the test conditions.