A novel high-performance counter electrode for dye-sensitized solar cells

A novel Pt counter electrode for dye-sensitized solar cells (DSC) was prepared by thermal decomposition of H₂PtCl₆ on NiP-plated glass substrate. The charge-transfer kinetic properties of the platinized NiP-plated glass electrode (Pt/NiP electrode) for triiodide reduction were studied by electrochemical impedance spectroscopy. Pt/NiP electrode has the advantage over the platinized FTO conducting glass electrode (Pt/FTO electrode) in increasing the light reflectance and reducing the sheet resistance leading to improve the light harvest efficiency and the fill factor of the dye-sensitized solar cells effectively. The photon-to-current efficiency and the overall conversion efficiency of DSC using Pt/NiP counter electrode is increased by 20% and 33%, respectively, compared to that of using Pt/FTO counter electrode. Examination of the anodic dissolution and the long-term test on the variation of charge-transfer resistance indicates the good stability of the Pt/NiP electrode in the electrolyte containing iodide/triiodide.     

邻氟苯甲腈的合成研究

以邻甲苯胺为原料 ,采用四步反应法合成邻氟苯甲腈。 (1)邻甲苯胺经西曼反应合成邻氟甲苯 ,收率 6 5 % ;(2 )邻氟甲苯经氯化、水解得到邻氟苯甲醛 ,以过氧化苯甲酰为氯化引发剂 ,氧化锌为水解催化剂 ,收率 80 % ;(3)邻氟苯甲醛经肟化反应得到邻氟苯甲醛肟 ,收率 87% ;(4)肟用乙酸酐脱水合成出邻氟苯甲腈 ,收率 76 % ,产品质量分数大于 99%。     

Atom transfer radical polymerization of n‐butyl methacrylate in an aqueous dispersed system

Atom transfer radical polymerization of n‐butyl methacrylate (BMA) was conducted in an aqueous dispersed system with different kinds of copper complexes. The partitioning behavior of the copper complexes, including CuCl/4,4′‐di(5‐nonyl)‐2,2′‐bipydine (dNbpy), CuCl₂/dNbpy, CuCl/2,2′‐bipydine (bpy), CuCl₂/bpy, CuCl/bis(N,N′‐dimethylaminoethyl)ether (bde), and CuCl₂/bde between the monomer (BMA), and water was studied in detail with ultraviolet‐visible spectroscopy. The results show that with a less hydrophobic ligand, such as bpy or bde, most of the Cu(I) or the Cu(II) complexes migrated from the BMA phase to the aqueous phase, the atom transfer equilibrium was destroyed, and the polymerization was nearly not controlled; it converted to classical emulsion polymerization. As to the very hydrophobic ligand dNbpy, although the partitioning study of the copper complexes indicated that not all the copper species were restricted to the organic phase, the linear correlation between the molecular weight and the monomer conversion and the narrow polydispersities confirmed that the polymerization was still quite well controlled. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3175–3179, 2003     

Aerosol deposition of dense lead zirconate titanate thin films at room temperature

Lead zirconate titanate (Pb(Zr,Ti)O₃, PZT) films were grown on silicon 1 0 0 substrate by aerosol deposition, using solid-state reacted powder containing donor oxide Nb₂O₅, while the substrate was maintained at room temperature. The PZT films were simultaneously sintered upon deposition on a highly densified ceramic layer. Crystalline phases of the deposited films have been determined by X-ray diffractometry (XRD), and microstructures analysed by transmission electron microscopy (TEM). The cross-section microstructure consisted of several thin layers, including the PZT film and the platinum electrode and titanium-buffered layers on the substrate. High-resolution images revealed that the PZT layer contained a mixture of randomly oriented grains of nanometre size, which were embedded in an amorphous matrix. In contrast to the conventional liquid-phase sintering mechanism, sintering of the PZT films involved amorphised phases generated by pressure-induced amorphisation (PIA) from plastic deformation when the initial powder particles collided amongst one another upon reaching the silicon substrate during aerosol deposition. An analogy may be drawn to the impact of extraterrestrial meteorites in which diaplectic glass, i.e., amorphised phase, was formed and retained metastably at room temperature. The individual PZT grains were joined with the amorphised phase(s) and sintered to become a dense, thin film on the silicon substrate.     

基于云端协同计算架构的边缘端I/O密集型虚拟机资源分配方案

大型制造业生产车间业务流程复杂,传统固定资源配置方式将产生负载不均衡的问题。针对此问题,设计并实现了一种基于云端协同架构的边缘端I/O密集型虚拟机资源的分配算法,通过定义计算节点中每个I/O密集型虚拟机三个维度的信息计算得出I/O密集型虚拟机的优先级,并按最大优先级队列实时统一分配硬件资源。实验结果表明,该算法在应对工业机械设备高响应和高通量的要求上有较为明显的提升,为实际生产起到了优化资源配置的作用。     

能效优先的用户关联与功率控制协同优化机制

在异构蜂窝网络中,针对系统的能效,提出了一种基于效用函数最大化模型的用户关联与功率控制协同优化方案,该方案表示为非线性混合整数问题。为了求得该问题的最优解,设计了一种迭代算法,首先将原问题转换为带参数的多项式形式的问题,在外层循环利用Dinkelbach方法求得最佳的能效因子,然后在内层循环分别求得最佳的用户关联矩阵和传输功率。最终实验结果表明,用户关联与功率控制协同的优化方案在能效和负载平衡方面比固定功率条件下的用户关联策略的性能更优。     

CENTUM CS1000在离子膜烧碱项目中的应用

介绍了DCS的配置及其功能特点，并分别从螯合离子交换树脂塔的控制，烧碱浓度PID控制，氯氢压力的双闭环比值调节，系统溶液的pH值调节，离子膜烧碱生产中仪表自控的联锁功能等方面叙述了DCS的控制方案及设计思想。     

基于循环自相关的NC-OFDM信号参数的盲估计

在认知无线电(CR)环境中,频率资源不足的问题越来越严重,非连续正交频分复用（NC-OFDM）能够工作在非连续的频谱环境,针对NC-OFDM信号的参数估计重要问题,提出用循环自相关的方法。该方法首先分析循环平稳信号特点,然后根据NC-OFDM信号的循环自相关在循环频率α以及时延τ切面图具有离散谱线特征进行参数估计,最后对NC-OFDM信号的循环自相关进行数值仿真。仿真结果表明在低信噪比下,能有效估计NC-OFDM信号的参数及识别零前缀的正交频分复用信号（ZP-OFDM）,且实验证明关闭近90%的子载波数目,都能够实现NC-OFDM信号的参数的盲估计。     

基于遗传算法优化的OCSVM双轮廓模型异常检测算法

针对Modbus工业总线协议的特殊性及工控数据样本的不均衡性,利用单类支持向量机（OCSVM）分别构建正常OCSVM模型和异常OCSVM模型,即双轮廓模态来模拟系统通信的正常模式和异常模式,从而实现工控系统异常检测。同时将遗传算法优化自变量降维应用于工控网络入侵检测场景,实现对输入自变量的降维压缩处理,防止OCSVM模型出现过拟合现象及分类准确率低的问题,提高异常检测的精度,缩减建模时间。通过仿真验证了该算法对工控网络异常检测的有效性。