Manufacturing method for monolithic dye-sensitised solar cells permitting long-term stable low-power modules

A manufacturing technique for monolithic dye-sensitised solar cells is presented. Encapsulated modules designed for indoor low-power applications have been prepared using industrial methods and equipment. Under certain conditions (light intensity <5000 lx, temperature between –10°C and 50°C, and relative humidity of appr. 50%), the modules have performed well and shown excellent long-term stability. Moreover, modules withstand illumination in combination with storage at 100% relative humidity. However, a certain degradation of the module performance takes place at illuminations exceeding 5000 lx and temperatures exceeding 50°C.     

The Region 1 & 3 Broadcasting‐Satellite Service Plan after WRC‐03

The 1977 Broadcasting‐Satellite Service (BSS) Plan for Region 1 & 3 had been widely acknowledged to be out‐of‐date by the late 1980s. Development of digital modulation in the early 1990s provided an opportunity to update the technical provisions of the Plan to make it more economically viable. After a decade of work and three World Radiocommunication Conferences (WRCs), the revision of Region 1 & 3 BSS Plan was finally completed in 2003. The new Plan increased channel assignments from 5 to 10 analog‐equivalent channels for each country in Region 1, and from 4 to 12 channels for each country in Region 3. Yet, despite the increase in capacity, the new Plan is surprisingly similar to the original one in terms of the technical parameters. It is still based on national coverage, and the channel plan, orbital location, orbital spacing, and polarization are also the same. As a result, the new Plan is no more economically viable to implement than the old. To create economically viable BSS systems would most likely require modifications to the assignment in the Plan. Yet, modification procedures were made more difficult to apply after replanning. Less future implementation of BSS networks than would otherwise have occurred can be expected, and an inefficient usage of these frequency bands will likely result. On the other hand, less implemented systems will mean more capacity set aside for future use. This is important for countries that currently do not have satellite operations. In the end, BSS replanning reflects the eternal conflict between efficient usage and guaranteed future access. Copyright © 2005 John Wiley & Sons, Ltd.     

Static and Dynamic Spins in Superconducting La2−x Sr x CuO4: The Risø Years

One important area of modern condensed matter research is the investigation of the nature of the superconducting cuprates. Much progress in this field has been obtained with the technique of neutron scattering. We here present a review of neutron scattering studies of the high-temperature superconductor La_2?xSr_xCuO₄, performed at Risø National Laboratory. We review the work on the mapping of the incommensurate spin fluctuations, the investigation of the gap in the fluctuation spectrum, the magnetic properties of the vortices appearing in an applied field, and the quantum critical behaviour of the system. We discuss our findings in the light of results of neutron scattering from other groups, on other cuprate systems, and results from other experimental methods, e.g. NMR, μSR, STM, X-ray diffraction, and ARPES. We end with a discussion on the implications of the experimental results for the progress in the general understanding of high-temperature superconductivity. PACS numbers: 61.12.Ex, 74.20.Mn, 74.72.Dn, 75.25.+z, 78.70.Nx.     

Multivariate polynomials, standard tableaux, and representations of symmetric groups

This paper is concerned with structural and algorithmic aspects of certain R-bases in polynomial rings R[X_ij] over a commutative ring R with 1. These bases are related to standard tableaux. We shall examine the main tools in full detail: (symmetrized) bideterminants, Capelli operators, hyperdominance, and generalized Laplace's expansions. These tools are then applied to the representation theory of symmetric groups. In particular, we present an algorithm which efficiently computes for every skew module of a symmetric group an R-basis which is adapted to a Specht series. This result is a constructive, characteristic-free analogue of the celebrated Littlewood-Richardson rule. This paper will serve as the basis for a possible generalization of that rule to more general shapes.     

Hereditary spherocytosis: diagnostic and anaemia-associated aberrations of ghost proteins

Various disorders of the red cell skeleton and membrane have been described in hereditary spherocytosis. To elucidate which aberrations could be used for identification of HS patients in a Danish population, we examined ghosts from 17 HS patients and 20 normals by use of SDS-gel scanning, native spectrin extraction, and limited tryptic digestion. Compared to normals, HS patients had significantly lowered alpha-spectrin (p < 0.004), protein 4.2 (p < 0.025), and actin (p < 0.05), and significantly increased anion-transporter (p < 3 x 10(-6)) and glyceraldehyde-3-phosphate dehydrogenase (G3PD, p < 0.04). Sixteen out of 17 HS patients could be identified by aberrations of the anion-transporter or protein 4.2 outside a 95% confidence interval for normals. Extraction of native spectrin and limited tryptic digest showed no difference between normals and HS patients. RBC separated into young and old fractions were used to examine the occurrence of protein aberrations associated with RBC age. Young RBC contained more G3PD (35%) and less protein 4.1 (6.5%) and actin (8.7%) than old. In male HS patients an increased G3PD content showed a linear correlation (p < 0.001) with a low concentration of blood haemoglobin. We conclude that aberrations of G3PD, and possibly protein 4.1, and actin, are associated with anaemia in HS. Increased anion-transporter or lowered protein 4.2 may be useful for diagnosis of HS, and were inherited in five out of six families where two generations were available.     

New CAMAC based data acquisition and beam control system for Lund nuclear microprobe

A new CAMAC based data acquisition system has been installed at the Lund Nuclear Microprobe facility. This paper reports on the development and present status of the data acquisition system. The system is a true multiparameter CAMAC based system with fast Fera bus readout and in crate memory buffer. The user interface is based on Sparrow Kmax software for a Power Macintosh platform. The system read out and tag the event data with position on-line, which make fast on-line monitoring of spectra or element maps possible.Simultaneously, all data can be saved event by event for off-line analysis. The beam scanning part is software controlled through a timed D/A converter, this allows fast scanning of the beam. With a CCD-camera and video card the area to be analysed could be defined directly from the image, and the sample position can be moved. Any kind of irregular scan patterns could be defined.     

Efficient return algorithms for associated plasticity with multiple yield planes

A new return method for implicit integration of linear isotropic yield criteria is presented. The basic idea is to perform all the manipulations in the principal stress space and thereby achieve very simple formulae for calculating the plastic corrector stresses, based on the constant gradient of such criteria. The return formulae are in closed form and no iteration is required. The method accounts for three types of stress return: return to a single yield plane, to a discontinuity line at the intersection of two yield planes and to a discontinuity point at the intersection between three or more yield planes. The infinitesimal and the consistent elastoplastic constitutive matrix are calculated for each type of stress return, as are the conditions to ascertain which type of return is required. The method is exemplified with the Mohr–Coulomb yield criterion. Copyright © 2005 John Wiley & Sons, Ltd.     

A thermodynamic evaluation of the c- cr- fe- w system

A thermodynamic evaluation of the C-Cr-Fe-W system has been made using a multi-sublattice model. A set of parameter values describing the Gibbs energy of each individual phase is given and a number of calculated sections of the C-Cr-Fe-W phase diagram are presented and compared with experimental data. Formerly with the Division of Physical Metallurgy, Royal Institute of Technology, Stockholm, Sweden