A two-dimensional time-domain finite element formulation for periodic structures

A formulation is presented for a two-dimensional time-domain finite-element method (FEM-TD) that incorporates periodic boundaries. The specifics of the method are shown for scattering problems, but it should be straightforward to extend it to radiation problems. The method solves for a transformed field variable (instead of solving directly for the electric field) in order to easily enable periodic boundary conditions in the time domain. The accuracy and stability of the method is demonstrated by a series of examples where the new formulation is compared with reference solutions. Very accurate results are obtained when the excitation (frequency range) and the geometry are such that no higher order Floquet modes are present. The accuracy is degraded in the presence of higher order modes due to the rather simple absorbing boundary condition that is used with the present formulation. The method is found to be stable even for angles of incidence close to grazing.     

The Region 1 & 3 Broadcasting‐Satellite Service Plan after WRC‐03

The 1977 Broadcasting‐Satellite Service (BSS) Plan for Region 1 & 3 had been widely acknowledged to be out‐of‐date by the late 1980s. Development of digital modulation in the early 1990s provided an opportunity to update the technical provisions of the Plan to make it more economically viable. After a decade of work and three World Radiocommunication Conferences (WRCs), the revision of Region 1 & 3 BSS Plan was finally completed in 2003. The new Plan increased channel assignments from 5 to 10 analog‐equivalent channels for each country in Region 1, and from 4 to 12 channels for each country in Region 3. Yet, despite the increase in capacity, the new Plan is surprisingly similar to the original one in terms of the technical parameters. It is still based on national coverage, and the channel plan, orbital location, orbital spacing, and polarization are also the same. As a result, the new Plan is no more economically viable to implement than the old. To create economically viable BSS systems would most likely require modifications to the assignment in the Plan. Yet, modification procedures were made more difficult to apply after replanning. Less future implementation of BSS networks than would otherwise have occurred can be expected, and an inefficient usage of these frequency bands will likely result. On the other hand, less implemented systems will mean more capacity set aside for future use. This is important for countries that currently do not have satellite operations. In the end, BSS replanning reflects the eternal conflict between efficient usage and guaranteed future access. Copyright © 2005 John Wiley & Sons, Ltd.     

QoS enhancement for adaptive streaming services over WCDMA

This paper presents a new method to adapt the quality-of-service (QoS) in a wideband code-division multiple-access (WCDMA) system, called radio network feedback (RNF). The concept of RNF is in general applicable to all the services requiring a minimum quality (i.e., non best effort) and in this paper, the focus is on streaming. In this context, RNF makes it possible for a streaming server to adapt its source bit rate to a WCDMA radio link, whose bandwidth may vary in time due, for example, to decongestion/congestion situations over the air interface or to handover. This is very beneficial for the end user as it allows to increase the bandwidth (i.e., the quality) when possible and to decrease it (instead of just dropping the service) when needed. RNF was compared with Client-based adaptation solutions. Simulation results show that RNF is fast and accurate and performs better than Client-based adaptation. For example, rebuffering occurs only with Client-based method. Moreover, with RNF the up-switch is performed only when needed, whereas the up-switch performed by means of the Client-based method is often erroneous and may annoy the end user.     

Enzymatic biodiesel production: Technical and economical considerations

It is well documented in the literature that enzymatic processing of oils and fats for biodiesel is technically feasible. However, with very few exceptions, enzyme technology is not currently used in commercial‐scale biodiesel production. This is mainly due to non‐optimized process design and a lack of available cost‐effective enzymes. The technology to re‐use enzymes has typically proven insufficient for the processes to be competitive. However, literature data documenting the productivity of enzymatic biodiesel together with the development of new immobilization technology indicates that enzyme catalysts can become cost effective compared to chemical processing. This work reviews the enzymatic processing of oils and fats into biodiesel with focus on process design and economy.     

Emission Of Volatile And Semivolatile Organic Compounds From Waterborne Paints – The Effect Of The Film Thickness

A waterborne paint was applied to tin plated steel sheets with three different film thicknesses. The emission of volatile and semivolaile organic compounds ((S) VOCs) from the samples was measured in small climatic chambers under standard conditions over a two-week period. The purpose of the study was to evaluate the effect of the film thickness on the emission rate decay. First order decay models, including sink effects for the high boiling (S) VOCs, were fitted to the concentration versus time data. The results showed that the first order rate constants decrease with increasing film thickness. In uddition, the results indicated that the emissions of the (S)VOCs in the waterborne paint film seemed to be controlled by evaporation. The thicknesses of paint films used in climatic chamber tests to estimate emission rates for product compurison or emission prediction must be known in order to prevent erroneous conclusions     

An overall model for maintenance optimization

This paper presents an approach for identifying the optimal maintenance schedule for the components of a production system. Safety, health and environment objectives, maintenance costs and costs of lost production are all taken into consideration, and maintenance is thus optimized with respect to multiple objectives. Such a global approach to maintenance optimization requires expertise from various fields, e.g., decision theory, risk analysis and reliability and maintenance modelling. Further, a close co-operation between management, maintenance personnel and analysts is required to achieve a successful result. In the past this has been a major obstacle to the extensive use of proper maintenance optimization methods in practice, and techniques to promote the communication between the involved parties of the optimization process is an essential element in the suggested approach. A simple step by step presentation of the required modelling is provided. Contrary to most current methods of RCM (Reliability Centered Maintenance), the approach is based on an analytic model, and therefore gives a sound framework for carrying out a proper maintenance optimization. The approach is also flexible as it can be carried out at various levels of detail, e.g., adopted to available resources and to the managements willingness to give detailed priorities with respect to objectives on safety vs production loss.     

Existence of discrete-time LQG-controllers

Existence results for the LQG-controller are investigated. An infimal Riccati equation based controller may potentially give closed loop eigenvalues on the unit circle. Assuming left and right invertibility it is shown that there exists an optimal controller if and only if the Riccati equation based controller stabilizes the closed loop system after removal of all its unobservable and uncontrollable modes. Furthermore this reduced controller is the optimal controller, and its transfer function is unique. This existence condition is a considerable simplification of the more general geometric condition recently derived by Trentelman and Stoorvogel.     

Natural and induced tolerance in an immune network model

It has been proposed that the immune system can be partitioned into central and peripheral immune systems. Recently, Carneiro et al. (1996a, b) proposed a network, model incorporating B and T lymphocytes that explicitly accounts for that partition. This model however, had some limitations that are tackled here. Two main changes were introduced: the average idiotypic connectivity is now an explicit function of time based on empirical evidence; and the activation of T lymphocytes by antigen is described by a log-bell shaped dose response curve. The new model, which also accounts for the CIS and PIS distinction, shows more reasonable results since the frequencies of tolerant, immune or autoimmune responses to an antigen are now correct. The model provides a new interpretation for tolerance induction during the neonatal period, and for the adult tolerance by low or high doses of antigen. It predicts that natural tolerance for antigens available during the neonatal period can be kept indefinitely upon their removal, while tolerance induced in the adult stages is rapidly lost upon transient removal of the antigen. A semiquantitative analysis of the model provides a simple explanation for the different results in terms of the frequency at which a limited set of canonical connectivity structures emerge during ontogenesis.     

The Polymorphism of Low Erucic Rapeseed Oil with High Content of Palmitic Acid

A new type of low erucic acid rapeseed oil containing high amount (11%) of palmitic acid (C₁₆-LOBRA) was studied, both in labscale and in pilot-plant equipment. The polymorphic behaviour of fat blends and margarine emulsions consisting of C₁₆-LOBRA, LOBRA and soybean oil and their hydrogenated fats were examined. The results clearly show the potential in the hydrogenated C₁₆-LOBRA. The time before the stable ß-form is developed is much longer for the hydrogenated C₁₆-LOBRA compared with the hydrogenated LOBRA and in fact similar to a hydrogenated soybean oil. The hydrogenated C₁₆-LOBRA is therefore well suited to be used in e.g. margarine systems.