A comparison of the dissolution of model compounds and the kerogen of Green River oil shale by oxidation with perchloric acid — A model for the kerogen of Green River oil shale

A stepwise degradation of a kerogen concentrate of Green River oil shale was effected by oxidation with perchloric acid of varying boiling point and concentration. Dissolution of the kerogen concentrate occurred between 160 and 170°C. Several model compounds were also oxidized with perchloric acid. The model compounds were polyethylene, graphite, nylon, and polyethylene oxide. The results indicated that the kerogen was similar to polyethylene oxide. The results of this study and previous work were used to present a model for the structure of the kerogen of Green River oil shale.     

Dentine hypersensitivity: a clinical trial to compare 2 strontium densensitizing toothpastes with a conventional fluoride toothpaste

Sixty-nine patients, aged 63-98 years and admitted at the Geneva Geriatric Hospital, were included in the present retrospective study. They received clomipramine orally, 50 or 75 mg/day. Blood concentrations of clomipramine were measured as part of a routine drug monitoring program. Comparison with a reference population of patients aged < or = 65 years indicated that elderly patients with concomitant somatic diseases reach higher dose-normalized concentrations of clomipramine and increased parent drug to demethylated metabolite ratios, as a consequence of impaired demethylation (approximately 50%) and hydroxylation (approximately 25%). Sixty-five percent of patients showed clinical improvement, with a maximum rate of satisfactory response observed in major depression. Severe side effects, such as symptomatic hypotension or confusion, were seen in 20% of patients. Because of 10- and 15-fold interindividual variations in the concentrations of clomipramine and its metabolite, respectively, therapeutic drug monitoring can provide valuable assistance to clinical judgment in individual dose adjustment for patients whose old age, associated somatic diseases, and comedication necessitate additional precautions.     

Activation energies for the deformation of superplastic alloys and their phases derived from hot microhardness studies

Activation energies for two superplastic alloys (Zn78-AI22 and Cu60-Zn4O) and their individual phases have been determined by plottingH/E againstT _m/T and utilizing the relationshipH/E = G exp (Q/nRT). Hot hardness measurements were made with a microhardness tester and Young's modulus values were obtained over the appropriate temperature range using the Rayleigh vibration technique. The activation energies obtained are compared, wherever possible, with those reported in the literature and are found to be in reasonably good agreement. These data help in the understanding of the mechanisms of superplasticity in these alloys.     

Use of electron microscopy on microstructure characterization of high chromium cast irons

The physical metallurgy underlying the development of cast microstructures in abrasion resistant high chromium cast irons, and their structural modification by thermal treatments is relatively complex. Structural characterisation via electron microscopy therefore has a key role to play in furthering our understanding of the phase transformations that control the microstructures and hence the service performances of these irons as wear parts. This paper shows how both scanning and especially transmission electron microscopy can provide valuable information on the nature of eutectic and secondary carbides and on the matrix structures in these irons. Particular attention is given to current characterisation research on conventionally cast 30%Cr irons that are used for applications involving corrosive wear e.g. slurry pumps and on a semi-solid cast 27%Cr iron that has a potential for applications in industry.     

A holistic approach to feature modeling for product line requirements engineering

Requirements engineering (RE) offers the means to discover, model, and manage the requirements of the products that comprise a product line, while software product line engineering (SPLE) offers the means of realizing the products’ requirements from a common base of software assets. In practice, however, RE and SPLE have proven to be less complementary than they should. While some RE techniques, particularly goal modeling, support the exploration of alternative solutions, the appropriate solution is typically conditional on context and a large product line may have many product-defining contexts. Thus, scalability and traceability through into product line features are key challenges for RE. Feature modeling, by contrast, has been widely accepted as a way of modeling commonality and variability of products of a product line that may be very complex. In this paper, we propose a goal-driven feature modeling approach that separates a feature space in terms of problem space and solution space features, and establish explicit mappings between them. This approach contributes to reducing the inherent complexity of a mixed-view feature model, deriving key engineering drivers for developing core assets of a product line, and facilitating the quality-based product configuration.     

New epoxy resins. I. The stability of epoxy–trialkoxyboroxines triaryloxyboroxine system

A polymer with high aromaticity and/or cyclic ring structures chain backbone usually has high heat, thermal, and flame resistance. Two diglycidyl ethers of bisphenols were prepared from 4,4′ isopropylidenediphenol (DGEBA) and 9,9-bis(4-hydroxyphenyl) fluorene (DGEBF) for evaluation. Four boroxines—trimethoxyboroxine (TMB), triethoxyboroxine (TEB), triisopropoxyboroxine (TIPB) and triphenoxyboroxine (TPB)—were used as the curing agents. DGEBA and DGEBF cured with various boroxines indicate that the trend for their respective glass transition temperature (T_g's), degradation temperatures (T_d's), and gel fractions are TMB-cured epoxy ≈ TEB-cured epoxy < TIPB cured epoxy < TPB cured epoxy. The DGEBF system usually has a higher T_g, T_d, gel fraction, oxygen index (OI), and char yield than the related DGEBA system. DGEBF/DGEBA (80/20 mol ratio) shows a synergistic effect in regard to char formation. This effect exists not only in the copolymer system but also in blended homopolymers of the separately cured resins. A modified mechanism for the polymerization of phenyl glycidyl ether (PGE) with TMB has been proposed.     

Intermacromolecular complexes by in situ polymerization

Hydrogen-bonded complexes of poly(acrylic acid) and poly(ethyl oxazoline) (PEOx) were prepared by photopolymerization of acrylic acid in which PEOx was dissolved. The glass transition temperatures (T_g) of the complexes are not only higher than those of the blends but also higher than the T_g value of either component polymer. The complexes dissolve in strong proton-accepting solvents like dimethyl formamide or dimethyl sulphoxide (DMSO), are swollen to various degrees in water and methanol, but are resistant to swelling by dioxane. When the density of hydrogen bond donor groups in the chain is reduced by 50% with the use of a copolymer of acrylic acid and methyl methacrylate, intermolecular association still takes place, although the affinity of complexation is reduced to some extent. When interpenetrating networks (semi-IPNs) are prepared by this method, about half of the PEOx can be extracted by DMSO after 4 days. The incomplete removal is probably a result of topographical constraints against diffusion.     

Studies of post drawing relaxation phenomena in poly(ethylene terephthalate) by infrared spectroscopy

In this paper, we study the relaxation behavior of initially amorphous poly(ethylene terephthalate) (PET) films drawn, at 80°C using a draw rate of 2 cm/min, to a draw ratio (λ) from 1 to 5 and then quenched to room temperature. These films were then heated at different temperatures from 68 to 80°C for different times and their orientation determined. The orientation measurements were performed by transmission infrared spectroscopy and the bands used for the determination of orientation were those at 1340 and 970 cm^?1 for the trans conformers, normalized using the 1410 cm^?1 benzene ring vibration. The crystallinity was determined by thermal analysis. It is shown that when PET is drawn to λ values up to 2–2.5 (before stress-induced crystallization), the orientation relaxes rapidly at temperatures close to the glass transition temperature of PET. For λ values of 3 or higher, the orientational relaxation of the amorphous regions is hindered. This effect is ascribed to the development of strain-induced crystallites, which are believed to act as pseudo-crosslinks.